I have very high resolution pictures on Photoshop. How can I save the picture for a good resolution (not stretchy) for my website, good quality too. and have it weight like 100KB
View 9 Replies
How do i reduce the ppi's of a given image in the Photoshop CC? Changing it in the image size, in the Resolution field, it accomplish nothing. It logs an entry in the History panel, but nothing changes in the picture. Did Adobe changed how this works, or it's just a bug?
View 38 Replies View RelatedI have been a Photoshop user since it was on floppy disk. Now I use CS2. My hobby is photography and Photoshop, of course, is a natural extention of that hobby. Despite all the years of using it I am anything but a master. Maybe a master of slow learning. I got a degree in that. Currently I am assembling sport collages and therein lies the rub.
Firstly, I work in jpeg. Everytime, no matter what I set my target size to (the frame) when I drag a photo in, it seemingly jumps to a larger size inside the frame. I am expecting it to be semi-locked at the size it is set to, normally 4 X 6, and maintained, relative to the frame, at that size when dragged to that frame.
This latest frame is 24" X 36". I drag a 4 X 6 picture in it and it's bigger than the frame. How can I consistently constrain the picture size I drag in and what am I not understanding about this process?
I know it's wrtten down in black and white, and we have covered this before. I am mainly designing little hand out flyers printed on that thin, glossy, card board, 4 x5 flyers, and cd album covers. Is it safe to go with the color profile Adobe RGB (1998) setting? If not what is? When I create these projects do I create the canvas with the size I am printing out in? For instance 4.75" x 4.75", and I am not sure on the resolution to go with. The res always gets me. I read about it, and it doesn't click for me. It starts out with a default of 72, but when I view as print size it looks smaller on screen. I am doing a big project for a big Minnesota band, and I don't want to mess it up. Especialy dropping in font so it doesn't look "pixly", shrinking photos so they don't lose quality is another one I haven't mastered yet. I have 4 days after tomorrow to complete this project. It's all from scratch except for the font which they are putting on disk for me. Little time to research, so I am asking for a huge favor. I want to make a good impression. This is my ticket for a free billboard.
View 8 Replies View RelatedI couldn't find this question anywhere else, but I can't be the only one who's come across this:
I have an image in a folder...finder/explorer tells me that it's 638px X 479px, and 234KB.
I open it in Photoshop and go to Image Size. PS says it is indeed 638x479pixels, but that it's 5.4" x 4.06" at 300pp and the "pixel dimensions" add up to 895KB?
(Then, when I place it in InDesign, at 100%, it measures around 2.1" x 1.6"? What's going on? If I input those dimensions into the Image Size dialogue box in PS, without resampling, it would have to be 750.25ppi. Obviously it's not.)
I've noticed that when I open a jpeg file on Photoshop CS2 from my computer the files will open with different resolutions e.g. 72 ppi, 180ppi, or 300ppi. even when they are from the same camera set to the same compression i.e. superfine, and large. Why does this happen and what can I do if anything to prevent this?
Does it matter if the resolution is set to 72,180 or 300 if I have these photos downloaded to one of the online photo developers like Walmart or Walgreens.
I like to have images in 300 dpi resolution. I notice that, if I specify a certain size image, say, 11 x 14 at 180 dpi, it prints out a different size than 300 dpi although the length and width are showing up the same .... 11 x 14. I've never really understood the correlation between dpi and resolution.
View 2 Replies View RelatedNeed to prepare images for a slideshow I am creating in ProShow Producer. Not understanding their suggestion to convert my images to jpeg 1.5.The projector is 1920 X 1080 and will be shown on a 26' wide screen at a movie theater.I correct the RAW image and then Save As tif (dimensions are 5184 X 3456 at 300 ppi).Usually I resize the tif at this point and Save As jpg. When I resize I have always put in the dimensions 1920 width for landscape images and resolution 300 ppi. Would you just change the pixel Dimensions and leave the Document size alone? They want me to Save As jpeg 1.5.
View 1 Replies View RelatedIs there a way in Photoshop to change the image size and resolution to a folder that has many jpegs images in it? Otherwise I will have to change the size and resolution to about 250 images. If Photoshop won't do it is there another program that will?
View 2 Replies View RelatedWhat is the best way to reduce an image's file size (say by 50%) so that someone with limited RAM can work on the file and then when they are done restore the file back to its 100% size for final output--without sacrificing resolution or pixels. File is a layered psd and will eventually be going to print.
View 3 Replies View Relatedi have a client who needs a big image (2000x2830) resizing to 595x842 and saving to a .pdf file and still keeping its high quality resolution even when its zoomed in on.
So far i have resized the image (just using IMAGE-IMAGE SIZE and put in the numbers 595x842) but it has lost its quality when zoomed in although it does look good at 100% but i need it to look good even at 500-600%.
What is the optimum resolution & picture size for creating slideshows in elements 9?
View 3 Replies View RelatedI am using the Nikon Super CoolScan8000 and Vuescan program to scan a slide film. I am scanning at this setting: scan resolution 4000 dpi. I have to make it a certain dimension that someone has been asking me for. They want the image at Width = 60cm (approx. 23 inches) and 300 dpi.
When I scan at 4000 dpi, I'm not sure what size to make the printed width. I have experimented numerous times and I've had no luck with getting exactly what I want. It seems that when I make the width 60 cm (the height adjusts proportionately) and the dpi at 300, the quality is not that great, which it definitely needs to be because it will be printed at a large size.
PS I am using Adobe Photoshop CS3 and I also have Adobe Photoshop Elements 9.
I want to re size them based on document sized in 'inches' to be set by resolution say for example: If the width or height is less than 4.72 inch the image resolution should be 150dpi; if the width or height is less than 1.33 inch the image resolution should be 300dpi; and the last one if the width or height is greater than 4.72 inch the image resolution should be 75dpi.
View 2 Replies View RelatedAfter spending time in PS elements 11 making changes in color and applying frames etc. I noticed after saving the file my resolution went from 5.5Mb to 847kb. Why is this?
View 29 Replies View RelatedI am trying to export PDFs of drawings with a high resolution image covering almost an entire A1. I realize of course that the file will be very large but it is much larger than I feel it should, and there are also some discrepancies.
The original image is around 100 MB, but only about half is visible in the viewport, so the PDF should be around 50 MB if there is no compression (only negligible amounts of text and lines besides the image), however if I plot it to a PDF using Adobe PDF, setting the resolution to 300 dpi and medium JPEG compression the resulting file is 150 MB. If I choose 72 dpi and low JPEG compression the file looks very bad and compressed but is still around 40 MB in size. This is far too large considering the amount of compression visible in the image, it looks like a 500 KB file tops.
However if I use the DWG to PDF printer instead of the Adobe PDF I can get a very good looking file at around 2,5 MB. Very suitable for printing, but the compression shows if you look up close in the computer (which is a requirement for these files). The odd thing here is that it makes no difference what resolution I set it to, 150 DPI to 1200 DPI creates the same looking file at exactly the same size. I'd like to be able to create a 2,5 MB file to email and a very high quality file for archivation, but not 150 MB large.
Another odd thing is that if I print another file but with the same type of image (a different facade) with 1200 DPI I get a very high quality file of 40 MB, but if I repeat the exact steps and settings for the first file I end up with a 150 MB file. Of course some differences in the image would account for some of this, but not nearly of this magnitude. I deleting everything from the large file and copying in the content from the small file, and successfully printed a 40 MB file again, so there doesn't seem to be some setting or bug in the file I am printing from, rather something in the original file with the image that I have Xref'ed.
How I would go about creating a very high quality file that doesn't bloat up way more than the original image? A 40 MB file is great considering the images are huge, but I can't get this result consistently.
I have some really large blueprints (black and white). Some of them exceed 30000 x 8000 in size. I want to reduce the overall size of these but when I try this my image gets really fuzzy. Is there a way to make these images smaller without messing up the clarity?
View 7 Replies View RelatedI realize the nature of my question maybe asking the impossible, but I have a low res image I downloaded from the internet, placed in an InDesign page, blew it up and printed it out. I was going for the distressed look that it has, it looks ok when I print it out considering it's low res and I blew it up fairly large. However, it's a little too pixelated to look professional when printed. Are they any tricks or things I can do to make it look higher res for print. I've attached the image as well as a screenshot of the InDesign file so you can see it in context.
View 4 Replies View RelatedI am a Photoshop newbie and I have a series of graphics (all 72dpi from a website) that I would like to print in 300dpi. Is it possible to take a 72dpi .jpeg or .gif file and easily convert it to a higher resolution printable graphic? If Photoshop can't do it, is there any type of program that can?
View 1 Replies View RelatedCan someone please explain to me about file sizes and image dimensions. I have to put together a collage which is 165mm high by 258mm wide. If I click file new and choose default resolution (72) then the file size is ok, if I type in 300 dpi the image becomes huge.
If i chosse 300 dpi then the images I was going to use seem tiny on such a vast workspace - Im confused why does the canvas become so large when changing resolution?
i used photoshop to design the website sliced it with image ready and imported as html..but then i check out the website some of the image is pixelated..how can i fix it.to view it as the same thing as i see it in photoshop while designing?
View 9 Replies View RelatedWhy does a previewed website come out at only 1/2 the screen size using Xara Designer Pro 6? I am viewing on a 1920x1080 widescreen and have used the template supplied by Xara.
View 3 Replies View RelatedA friend took a digital photo with his camera best quality, tiff, and PS showed it had a 72 dpi resolution but a big size: about 70 x 60 cm. (I don't remember the pixels size but it looked high).
I thought the resolution was very low for obtaining a good print but it can be printed with good quality at a 16 x 20 in size. Which is the equivalences between resolution, image size and pixels size? How you convert one mesure to another? Can I forget about resolution and care only about pixels size?
I have designed a page in photoshop and I have been researching on how to get that image to be a website with hyperlinks, anyway I have learned that I need to import my image into ImageReady but I can't seem to find that option in Photoshop CS3 - my question is where would i find Image Ready or is this a Pluggin I need to get?
Also, will creating my site via photoshop slow the site down? Will the site not load completely depending on the browser used?
I am using the brushes within Adobe Photoshop 7.0.
I made a tiff out of the psd file. I put this into InDesign so I can add text.
When I print from InDesign, the brushes (not all of them, but mostly the butterflies, flowers...stuff from the nature set) come out in low res. It looks kinda blurry when printed. I have the image set to 300dpi..is there something else I can do with the brush settings?
On the Adobe site it states:
If you need the lowest layer selected, press Option-Shift-[.
Well, it doesn't work for me in all cases because if another layer is selected, both end up being selected. Inside an Action, how do I select the lowest layer, and only the lowest layer?
And while I'm asking Action questions, in an existing action, how do I start recording so that the new actions are placed right at the top? If I select the name of the Action, the new recording is placed at the bottom. If I select the first item, the new recording is placed second.
what is the best extension to use in sites that are image rich.
I have an online jewelry store [URL] ....... and each product that I have has 5-6 images.
I have a feeling that the performance of the site may go down, as the products expand.
Right now I am using JPEG. Is there anything else I can use or do, to keep my site light.
I made this oversized graphic at 30 x 20.463" at 300 resolution in Photoshop 7.0.
The printer made it to the final output size at 69.504 x 47.408" (this is proportional to the size above). at a resolution of 125.
is 125 safe? Tell me I'm not wrong, but I think 125-150 resolution is okay, right? Especially for that size!
But months after I designed that oversized graphic..I also did another one, but the size was: 51 x 42.306 at 600 resolution & the output size was 87.5625 x 106" at 300 resolution.
I was designing a membership card for a company and set a resolution of 300 and I can't remember what document size I set originally.
Anyway, my sizes now are as follows:
Pixel Dimensions: W 700, H 410
Document Size: 5.93cm X 3.47cm
Resolution: 300 pixels/inch
When I save my psd as any image type, my image is MUCH bigger than 5.93 x 3.47. How can I save it so that it is the size I want, but still the good image quality (resolution) and so I get the same size when I print it.
I was designing a membership card for a company and set a resolution of 300 and I can't remember what document size I set originally.
my sizes now are as follows:
Pixel Dimensions: W 700, H 410
Document Size: 5.93cm X 3.47cm
Resolution: 300 pixels/inch
When I save my psd as any image type, my image is MUCH bigger than 5.93 x 3.47. How can I save it so that it is the size I want, but still the good image quality (resolution) and so I get the same size when I print it.
I am trying to save imges for my website in photoshop. after the image is resized and click on save for web devices, an error message will come up.
View 4 Replies View Related
