Photoshop :: Removing The Border Around A Gif
May 16, 2006
I've created a graphic in photoshop, used the Save for Web function (to a gif), and got a thin black border around the resulting image... which I don't want. The image is meant to integrate onto a web page with a white background without showing the borders of the image.
I've inferred that this box around the image is the bounding box. In print with preview, the preview shows the box. If you check off the "show bounding box" option, the box disappears and the print preview image looks the way I want my gif to look.
Even with a completely image-free psd file, it defaults to putting this box around the canvas.
I find it hard to believe that you can't create a border-free gif in photoshop, but I don't seem to be able to figure out how to turn it off.
View 6 Replies
ADVERTISEMENT
Nov 23, 2006
I have adobe photoshop 7.0, and I want to use for some basic things, but even after searching I'm unsure if and/or how it can be done. Basically I want to "cut out" part of a picture like a cookie cutter, and then place it on a different background. For example, if there is a picture of a lion at a zoo, I want to isolate the lion, and paste it on a african sahara backdrop.
I'm not looking to do anything fancy, its just for a personal project, but I don't even know what terms to search for in the help section of photoshop. I've always had trouble finding how to do this and I don't know why because has to be one of the most common procedures in graphic design. Is this accomplished by using a mask or what..?
View 4 Replies
View Related
Jul 1, 2005
I'm trying to do something which may indeed be very simple, but I have failed to find the answer thus far...I need to remove the 1px black border around the project document as it's interfering with something i need to do...
View 2 Replies
View Related
Jun 6, 2004
I am creating animated buttons for my new topsite pages and cannot seem to rid my image of the white border around the logo in both layers. I first used the polygon lasso tool to crop the logo from the original image and pasted it into a transparent background. I then turned it into an animated gif. Any ideas on how to remove the white edges from around the black ring of the logo (see image) I've just about tried everything I can think of. You probably cannot see what I mean with this background, but on a darker background like blue or green it is really noticeable.
View 9 Replies
View Related
Sep 1, 2006
Whenever I draw a box on the page using the foreground color, the background color is applied as a 1px border (I believe) and is accompanied with the box.
When you go to select the background color, there doesn't seem to be any 'use no color for background' option. It's also not being added in the 'layer options' box either (as a stroke).
How do I remove that the outside background color?
View 1 Replies
View Related
Jul 23, 2012
When inserting a picture e.g. our logo, how do i remove the border that gets inserted? If turn the layer off i obviously loose the whole picture.
View 1 Replies
View Related
Nov 13, 2013
What is the proper syntax for removing a bmp file inserted into a drawing border defintiion? I am using VB.net.
I got all the way into editing the sketch of my border defintion...
I know the name of the sketch image I want to delete it's something like "C:Temp12345678.bmp"
So I wanted to use the name to get the image file and set it to a variable. Then run the .Delete() command on that. But it's not working.
This is what I have, where oCSTicBorderDef is equal to the border defintiion of the active document..
Dim oSketch As DrawingSketch
oCSTicBorderDef.Edit(oSketch)
Dim strImageDirectory AsString
[Code].....
View 1 Replies
View Related
Nov 11, 2012
I have a drawing that has a white background.
I would like to add more to the white background to make it bigger without having to stretch it and distort the image.
I want to place a circle shaped outline border around the original image with a set border thickness and color and be able to crop/remove the portion of the image beyond the outline, changing it from a square/rectangle image to a circular image.
If I am not able to change the drawing to have a round outer border from square, how can I make the outer parts past the newly created circular outline transparent?
View 6 Replies
View Related
Feb 19, 2013
Per the attached exhibit, how to get the plot border to cover the entire sheet border instead of just the bottom left corner.
View 1 Replies
View Related
Dec 22, 2011
Drawing A has a grid system Xref-ed into it. It also has a block reference in it, repeated in various places throughout the drawing.
I Xref-ed the grid into the block to check something, and now I can't get it out. This means that the grid now repeats all over Drawing A as well and is generally being a nuisance.
If I try to unload the Xref within the block, it unloads it in Drawing A too. If I try to detach it from the block, it returns this message: Xref [Xref name] has multiple references. Not detached. If I try to detach the Xred from Drawing A, it returns the same message.
How do I unload the same Xref that occurs in a block in a drawing, and in the drawing itself, independently of each other?
View 1 Replies
View Related
Nov 30, 2004
I want to make a border for something. The border is basically a christmas light border around some text. What I did was I took a picture of one lightbulb and edited it so that I just got the lightbulb (no background or anything...). What I want to do is basically create a border from that single light bulb by alternating the colors of the bulb (like how you can with a brush). Can I create a new brush out of that light bulb? I coulda sworn I've done it before, and there was a lesson on brushes in the book... But I can't figure out how. Or maybe theres a way to get around it by doing a some sort of border?
View 3 Replies
View Related
May 21, 2009
I am trying to put a colored border on some text.
View 10 Replies
View Related
Aug 10, 2008
I'm trying to figure out how to add a simple black or white, solid border around photos. Does anyone know how to do that without distorting the image?
View 3 Replies
View Related
Dec 13, 2003
designing a site that is to be 760 width. It will have a 1px border around it which will be made by html for the table. My questions is do you have the canvas be 758 width and design in that or do you design with a 760 width and draw the tables in the design and just not include it in the slices?
View 4 Replies
View Related
Jul 27, 2006
how to make the picture look like it is floating above the background with a shadow below it. Also how do you add text.
View 5 Replies
View Related
Aug 15, 2006
When I try to add a border to a picture, everything goes fine until I try to fill it. Fill command fills it with a solid colour that becomes more transparent as it nears the center of the picture. Same thing happens with paint bucket tool and brush tool. Anyone know what I can do to fix this?
View 2 Replies
View Related
Jun 25, 2004
I have big, fancy, Photoshop 7.0 and I'll be damned if I can figure out how to do some simple redeye removal. The whole thing is really over my head, but I'm a musician trying to clean up some photos with redeye.
View 9 Replies
View Related
Oct 25, 2008
After installing the CS4 upgrade on my Vista 32-bit machine I went to uninstall CS3. The procedure ended up with the red crosses and an error message stating that CS3 and components could not be removed.
Having deactivated CS3 I tried once more with the same result.
I would appreciate any advice on how best to proceed to uninstall CS3 whilst ensuring I don't screw up my CS4 installation.
View 2 Replies
View Related
Oct 28, 2008
I just installed the CS4 upgrade and am trying to save HD space on my laptop.
Will there be any effects if I remove the old program?
Do I de-activate it first?
View 13 Replies
View Related
May 18, 2008
I'm running Photoshop CS3 as an upgrade from CS2 using XP Pro, In order to use some third party software I was advised to remove CS2 or the software would not work. But when I did so I found that some of CS3 was compromised as a result. For example, in Bridge I could no longer double click on an image to load it in PS.
Since my CS3 is an upgrade, is it sharing some common files with CS2? And if so, how do I remove it without removing the essential files. And if my CS3 it is not sharing files with CS2, what can I do to remove the latter without messing up the former?
View 2 Replies
View Related
Jul 17, 2013
how i can put a border around the HD symbol?
And how can i make everything without the HD Symbol transparent? [URL]....
View 3 Replies
View Related
Jun 18, 2012
Just seeing CS6 for the first time and trying to warm up to it. There were several annoyances I have been able to revert back to normal, but this one thing I can't seem to make go away.
The marquee crosshair used to be displayed with 1 pixel lines, now it has a 1px border around the entire crosshair when it is over a dark color. Is there a way to get rid of that border? It just feels a little cumbersome, and sort of annoys me. I would rather it not be there.
View 10 Replies
View Related
Nov 15, 2012
How do I place a border around an image using PhotoShop?
View 5 Replies
View Related
Sep 13, 2005
This is probably a simple question, but how do I round to corner of an image?
View 5 Replies
View Related
Mar 23, 2004
I want to take picture and add a border to it. A black one pixel border in photoshop.
View 8 Replies
View Related
Feb 22, 2008
I cant figure our how to hide the border in PS.
I'd rather there was a straight transition from the gray workspace to my image. I find the border distracting.
Can this be hidden?
View 1 Replies
View Related
Sep 27, 2004
I have created a web template that has a white backgrond, and will be forming a site that will have a white background.
What is the easiest way for me to put a border around my template in photoshop before I export it?.. ie i would like to have a thin black or grey border.
View 6 Replies
View Related
Jul 14, 2004
i have this border i made, a line weach consists from a number of colors, when i want to place it around a straight line shape i have no problem and all i need to do is to copy and paste and "free trasform" it acording to the angle of the shape. the problem is with a round shape, is there a way to control this line and make it round?
View 9 Replies
View Related
Jul 8, 2008
I use photoshop a lot and have a recurring issue... I often have to edit photos and images which invole me being zoomed in to 300-400%. When zoomed in this far I cannot work out how to view the edges of the document (if Im trying to draw a path or something around an object and the path needs to go out side the bordering edge then come back in) is there a way to do this? I can do it by zooming out, dragging the border box to be larger than the image , but can't seem to do it whilst zoomed in. which is a right pain in the rs.
View 2 Replies
View Related
Apr 30, 2007
How do I put a border using photoshop? I know...thats quite a simple task, however, I have yet to figure it out..
View 1 Replies
View Related
Mar 24, 2005
How do one create a rectangle in photoshop with borders (or just the outline) and no fill colour? How can the border thickness be defined?
View 2 Replies
View Related
