Photoshop :: Raw Files From ACR Opening As TIFFS
Mar 25, 2013
whenever i open my raw files from acr, they are opening as tiffs...i disabled the tiffs in acr preferences as well to prevent this happening but to no avail...when i go to save my file to jpeg, it defaults to tiff as highlighted and i have to select jpeg every time..then after saving a jeg, i am asked do i want to save the tiff file every time... I have disabled tiff support as mentioned in acr preferences...this has never happened before.
View 12 Replies
ADVERTISEMENT
Jun 22, 2012
raw images are not opening in photoshopcs5 nor tiffs with light room adjustment from lightroom3.
View 22 Replies
View Related
Jul 21, 2006
I have a weird problem with Photoshop CS. When I double-click on a tiff, jpeg, or Photoshop file it launches the program, but it won't open the image. In order to do that I must go to file and choose open. This is much more trouble. I can't figure out why. My photoshop guru friend couldn't figure out why. Any ideas?
Also, and this may or may not be related. When I open the program I get the following message: For Photoshop UI to display correctly, open System Preferences, click General, and turn off text smoothing for font sizes 8 and smaller.
The weird thing is, when I did what message suggested, I discovered that there was no "text smoothing" option to turn off under Preference (under General) in Photoshop. There is no General in the computer's System Preferences, so I'm assuming the message refers to Photoshop Preferences.
View 3 Replies
View Related
Oct 15, 2012
my Epson 700 scanner made tiffs of 600 mb each. I put one levels adjustment layer and it doubles to 1.2 GB.(and I turned off maximize capability the day before per another thread)And the files now do not get small or big previews in Bridge at all. (I purged cache)
I tested a save as PSD, and they come in fine with previews and are only 430 MB 1/3 size of the Tiffs. I think I'm done with tiffs unless an agency demands them.
View 6 Replies
View Related
Apr 24, 2012
I have many PSD files from photoshop – with layers, masks, adjustment layers, nested groups, smart filters, layer styles and editable text at 600dpi with embedded color profiles. The idea is to import them all into lightroom and make a book.
Should I flatten the files and make them into tiffs or jpegs?
Does it make sense to keep them at 600dpi or Blurb will downsample them to 300 anyway? (if so I would rather do it myself, if not is there an option to control the output resolution?) What happens to color? – How do I ensure the best match between what I see on the screen and what the book will look like?
View 1 Replies
View Related
Jul 26, 2012
I've been using Lightroom 3 with an external hard drive for a few years now with no problems.
I shoot raw with my Canon t1i and jpg with my Canon SX-10.
Just last week I hooked up my external hard drive and Lightroom wouldn't connect to it. Usually when I hook it up, Lightroom opens up automatically. At least it use to.
I looked at the drive and it seems the tiff files are now called CR2 (Canon Raw I think). Why this happened and is there a way to get them back to where Lightroom will recognize them?
I can open them in Photoshop, but not Lightroom. I usually go first to Lightroom, then to Photoshop and back. Can't do it know though.
View 5 Replies
View Related
Mar 17, 2013
My main user folder on the iMac is set to be shared (read/write, including all enclosed files) with my MacBook Pro. The job is a series of one-page InDesign files (they are newspaper advertisements). The IDD files contain a series of Illustrator files with linked PSD files.The idea is that we can both work on the .idd and .ai files in the same folder at the same time.
It's all working fine EXCEPT that whenever an .ai file is opened on the MacBook, Illustrator doesn't know where the linked PSD files are. We can update the link, but when the .ai file is then opened on the iMac and saved, the same thing happens the next time it is opened on the Macbook.
I don't want to embed the PSD files into the .ai files as sometimes I have to modify them and they can be linked to up to 20 .ai files.
G5 iMac OSX 10.7.5 / Macbook Pro OSX 10.8.2 / networked via FireWire cable / file sharing on, laptop user has Administrator status, all files are read/write, permissions include all enclosed files / CS6
View 7 Replies
View Related
Apr 7, 2013
Date/Time: 2013-04-07 14:58:28 +0200
OS Version: 10.7.5 (Build 11G63b)
Architecture: x86_64
Report Version: 9
Command: Illustrator
Path: /Applications/Adobe Illustrator CS6/Adobe Illustrator.app/Contents/MacOS/Adobe Illustrator
Version: 723 (16.0.0)
Parent: launchd [132]
PID: 10493
Event: hang
Duration: 0.83s
Steps: 10 (100ms sampling interval)
Pageins: 19
Pageouts: 0
View 3 Replies
View Related
Feb 18, 2008
how to or if there is a plugin available to maintain a tiled tiff format after image enhancement?
View 2 Replies
View Related
Feb 4, 2013
I recently purchased CS6 and loaded it to my desktop PC running Windows 7 and everyhing is fine.
I recently purchased a new laptop and loaded a second copy to it (running Windows 8). When I process a RAW file and try to open it in PS6 about every 4th file does not appear in the PS6 workspace. The file details show in the top left corner, the background layer appear, I supposedly can save this file but I cannot see anything. When I close PS6 and re-open it and re-open the ACR file, then open to PS6 if works fine.
View 4 Replies
View Related
Dec 9, 2012
I have Photshop CS6 Extended but when I click on the .cr2 which is the RAW file I keep getting an error message "Could not complete your request because it is not the right kind of document"
I have tried installing the camera raw plugin Photoshop Camera Raw 7.1
Installation failed. Error Code: U44M2P7
View 2 Replies
View Related
Mar 19, 2013
CS5 won't open RAW (NEF) files from camera on list (Nikon D3000). My updates are current. What next?
View 22 Replies
View Related
Sep 18, 2012
I am running CS4. I have downloaded all recent upgrades. I have upgraded my camera body from a Nikon D90 to a D7000. Photoshop will not open the D7000 RAW NEF files. Jpeg files are fine.
View 2 Replies
View Related
Apr 7, 2013
Yesterday, before closing down, I uninstalled P/S 7, CS2 and CS3 to gain space, but do not know whether that action is relevant to my problem. Today I find that JPEGs will not open in Photoshop, and in Bridge only by going through Camera Raw. Photoshop will open tiffs, while Bridge will open some, but not all tiffs, through Camera Raw only. This problem follows many months of trouble-free operation of CS6.
My operating system is Windows 7 Ultimate. I have downloaded the latest patches for CS6, and have set the Bridge Preferences item on File Associations to Default.
View 4 Replies
View Related
Sep 29, 2013
I am using win 7 and CS5. I have both JPG and RAW files; however all of a sudden when I attempt to open some JPG files, they somehow are vertically truncated only opening halfh the picture.
View 3 Replies
View Related
Jul 17, 2009
want to open raw files. Add on?
View 1 Replies
View Related
Mar 15, 2004
This problem just started recently on my PhotoShop 7.
I try to open an EPS file that was created in Illustrator or Freehand (or any other EPS that is not a Photoshop EPS), it opens up
as a blank document, like a transparent layer (you just see the
gray and white checkerboard background).
This happens whether I try to open the file by FILE>OPEN or if I drag the EPS file over the PS7 icon.
I tried everything and looked everywhere but without success.
View 10 Replies
View Related
Jan 22, 2009
I had bought CS4 and Lightroom from Adobe.
My raw files ( nef as well as dng) open fine on it, however when they are converted, there is a mesh in front of the image.
My jpg files previously adjusted in CS2 also do not open properly with same mesh in front of them.
View 7 Replies
View Related
Jun 18, 2009
I cannot see open files in the workspace on cs3, the file will show thunbnail in the layers box but will not open in workspace.
View 4 Replies
View Related
Jun 5, 2009
I have two different psd files I cannot open. I last worked on these files May 30th. For each of them I completed a detailed mask, added a path and saved the files without changing the name. Today I went to work on my project and could not open either file.
When opening the 1st file I got this error message: Could not complete your request becaus the file is not compatible with this version of Photoship. When opening the 2nd file I got this error message: Could not complete your request because it is a not a valid Photoshop document.
View 4 Replies
View Related
Jul 18, 2009
I just bought a 50D and did a wedding. I have a new photoshop CS4. I just downloaded the most recent update. None of my RAW images will open in photoshop. They open in the Canon software that came with my camera, but won't open in Photoshop.
View 4 Replies
View Related
Dec 2, 2008
working with Photoshop 7.
I have CS2 at home and have been having trouble getting certain 7 files to open in my CS2.
View 1 Replies
View Related
Sep 20, 2008
I have a question about opening a .dds file to make skin for a car in RACE 07.
I have already installed the NVIDIA DDS plug-in and it used to work on PS CS2. Now I tried it on CS3 and at first it said that it was an unknown file format or something (don't remember the exact error). So I first re-installed the plugin. When that didn't work, I copied the dds.8BI file from the Plug-Ins folder in the CS2 folder to the Plug-Ins folder in the CS3 folder on my external HDD. Then I had the same error on both photoshops: "Could not complete your request because the file-format module cannot parse the file."
View 2 Replies
View Related
Jul 20, 2006
Will Photoshop CS2 read these, or do I have to use another software.... If so, what software?
View 4 Replies
View Related
Mar 15, 2009
I originally installed the software on my second drive which is intalled in my computer casing. This is due to limited space I have on my "C" drive, this is where the file "MyPictures" are also found.
Through Bridge, I can go through the "mypictures" file without a problem, however, if I am in photoshop the minute I go through the "open" fil commande the window opens I see the files but the computer freezes and I have to shut down the program.
I have received many suggestions to which none have resolved the problem. I have moved stuff around and I am now able to fit on the "C" drive the program (Photoshop) and "MyPictures" onto it. It did not solve the program either.
View 2 Replies
View Related
Sep 19, 2012
im having problems with saving my tiff files and converting. once i convert them to jpegs to email or go to the printers, they are changed and are washed out as if the org tiff before editing. when i open on my comp they are ok but when emailed to someone or once printed are destroyed. i dont think is my colour management as org jpegs files are fine. below are some details of the process.
i open my file (pro photo RGB, 16bit, 3888x2592 10.1MP) i edit the photo. if saving in jpeg i change to 8bit and save with the embedded colour profile button clicked.
View 2 Replies
View Related
Nov 24, 2013
I get this annoying problem with color banding when i export 16bits TIFFs ProPhoto RGB (with no compression) from Lightroom to Photoshop CC. Both LR and PS working space is set to ProPhoto RGB color space. Miraculously, the banding disappears when i convert to Adobe RGB or sRGB.
There's no banding in Lightroom, only in Photoshop. I have encountered others with the same problem, but no one have come up with a solution.
View 3 Replies
View Related
Jun 1, 2013
When I flatten the files that I have been working on into TIFFs for delivery to clients, sometimes the preview (or thumb nail) shows only a single layer of the original layered file that I was working with. When the file is opened in Photoshop, the complete image is there.
Is this a bug or is there a way to correct this before I flatten the image? Btw, I have seen this same issue through many versions of Photoshop... from CS3 through CS6. When saving the same flattened image as a JPG, the preview saves correctly.
View 10 Replies
View Related
Aug 7, 2012
I was trying to create a PDF with some modified TIFFs. The TIFFs were opened, manipulated and flattened in Photoshop to reduce file size. I then took a few TIFFs and tried to create a new PDF. When the PDF was created I zoomed into one of the pages.
Noticed that the Photoshop editing has shown thru (all of the good and removed editing). It was like all of the Photoshop editing had come thru, all though I had flattened the image at its final output.
I then tried to create another PDF. I took the flattened TIFF images and saved them as PDFs in Photoshop. This worked. However, the file size was super huge. The 'reduce file size' destroyed the clarity of the pictures.
Is there a way to create a PDF from flattened TIFFs without all of the Photoshop edits to come along?
Acrobat 10
Photoshop CS5
Windows 7 HP x64
View 8 Replies
View Related
Jul 28, 2006
I'm trying to save a bunch of drawings as TIFFs. Some of them save in color, others do not. why some are not saving in color?
View 1 Replies
View Related
Jan 22, 2008
am currently working on a Flash site which is relying quite heavily on images with transparency.
my method has been to create PS3 images, save as TIFF, preserve transparency, and then import into Flash. However sometimes when I go to save, I do not get the TIFF options dialogue box, and when this happens Flash cannot import the image.
I found this quote on another post which might be related, but I do not know enough about photoshop to understand it!:
"Keep in mind that before you will have a transparency option when saving, you need to have either a clipping path or an alpha channel saved with the transparency info in it. (aka a mask)"
is this what I am not doing, and if so, how do create a clipping path or alpha channel to save my transparency info 'in'?
At the moment I seem to be able to get around the problem by opening a new image, dragging the layer into that, and then saving. but it's a pain in the arse and for some of them, I need to preserve the position of a layer more accurately...
View 1 Replies
View Related
