Photoshop :: Low View Quality
Oct 6, 2012
So while I was working on of my project, suddenly photoshop just crashed really for no good reason. When I turned back I have noticed that my vector shapes had pixals on the edges. Pixels appear only on 200% which is not a lot, and as I know even in very close zoom it hard to see vector shapes pixels. It seems like low res picture now or InDesign "Standart quality view". Plus I draw vector shape in Illustrator then zoom in to 6500& but I still didn't see any pixels
View 7 Replies
ADVERTISEMENT
Jan 19, 2013
Upgrading from PSE 10 to 11, I noticed that when I watch my images with the organizer in PSE 11 in full screen view mode (F11), while the images load faster, they are shown in a lower quality than in PSE 10 or any other version of PSE that I owned before. In PSE 11, after the initial viewing in full screen (in the "fit screen" mode), when I click with the mouse on an image to display the "100%" view, there is a delay and the program says "Loading...", after which the 100% view in the full screen mode appears. When I then click another time with the mouse on the image to get back to "fit screen" mode, I get an image of better quality than during the initial view!
So it seems like the program first gives a faster, but lower quality view of the image in full screen mode, and only after the user requests a 100% view, it actually loads the image with full detail, which is then preserved when going back to the "fit screen" view. This is a serious issue for me, because I also use PSE organizer to present my pictures to other people, and I don't want to show them some lower quality versions of my images, but the full quality ones, without having to first choose "100% view" and then go back to "fit screen".
How can I make the PSE 11 organizer give me a full-quality full screen image right away, as this used to be the case in PSE10 and before?
(I have both versions, PSE 11 and PSE 10, now on the same computer and tested this to confirm that the PSE 11 initial full screen view is of lower quality than the PSE 10 one. Also in PSE 10, there is practically no delay for displaying the "100%" view afterwards, indicating that the image was loaded with full detail right away.)
View 28 Replies
View Related
Nov 30, 2008
I'm pretty new to photoshop, and I've started on a personal project. I want to basically take a video still from a music video and turn it into a poster. Sadly i can not find a good quality version of the video as it is older and not super famous, (kyuss-one inch man). So i found an online video that is better then youtube but not great, and i captured it through the vista snipping tool (screen capture).
Basically I want to take this low quality picture, and turn it into a good quality poster (not huge). What techniques and things must I do? I'll probably have to find a printer near here and require a specific dpi as well.
View 2 Replies
View Related
Jun 23, 2012
My problem is related with the quality of a image.
My question is how to maintain high quality (original quality) of a image after resizing it?
If i resize it with same ratio like:
2816x2112px to 1600x1200px (4:3)
2816x1584px to 1920x1080px (16:9)
Mainly i use scale image option in Gimp. But now i need to resize many images for my work so i tried David's Batch Processor to resize my images. After using it, i found there is some quality promble with the resized image.
Then i tried, the scale option with, use quality setting from original image and JPEG quality parameter is 95, in gimp but the problem is same. I did it with also with David's batch processor- JPEG quality parameter is 95.
Other thing is that, the original image 2816x2112px (4:3), size- 3.6 MB is displaying in image viewer with 47% and the resized image 1600x1200px (4:3). size- 1.2 MB is displaying in image viewer with 83%, So my questions are: How can i check the quality of a image after resizing it, means the image is exactly same as the original? Or Is David's Batch Processor maintain the original quality of the images after resizing?. I realy need to resize many images for my work.
View 2 Replies
View Related
Jun 8, 2013
I am trying to import photos from my computer to Photoshop elements 11. It has imported most but wont import some as "file quality is too high". How do I get around this? Do I have to downgrade the quality of my photos? To do editing wouldn't you want the best quality photos to start off with?
View 6 Replies
View Related
Jul 19, 2013
Is it possible to create a custom keyboard shortcut to Reset View in the Rotate View Tool?
View 1 Replies
View Related
Feb 12, 2006
When I'm working in PS CS and open a folder of pictures it always reverts to List view even though I exited last time in Thumbnail view. How can I set it to open in Thumbnail view by default?
View 2 Replies
View Related
Mar 29, 2006
I just finished a gif signature (I can't find anywhere to host the 2.16mb gif though.) The two video clips within the sig work fine, and look alright, however, the surrounding images are not exactly the greatest quality. Is there any possible way to keep these images as their former jpeg quality?
View 4 Replies
View Related
Feb 20, 2006
When I'm making gif images in photoshop/imageready, the quality is really bad.. The file isnt over 1 MB.. Before I made a gif that was over 6 MB without any quality loss.. how do I fix this?
View 3 Replies
View Related
Jun 3, 2009
I've been making some vid sigs and my first one (GTR2) looks great and today i started making a new one for Forza 3 and it looks absolutely terrible even on max 256 colours which i've used for all my video sigs,
View 6 Replies
View Related
Sep 5, 2012
I'm trying to save some web interface work over a background image for my youtube page. One problem I'm having is that I can't save to png because my image ends up being over 1MB. I can't figure out how to get it under.
Everytime I save it, the solid button looks muddy and pixely. PNG ends up being about 3MB so it's too big.
View 3 Replies
View Related
Sep 18, 2013
How do you set the jpg quality automatically when batch processing a newly converted set of jpgs?
View 2 Replies
View Related
Jan 17, 2013
I am using Photoshop CS6: I also tried this on CS5 going through the same process as below with a little bit higher quality but not the original quality.I open a PDF, Pops up "Import PDF" I hit ok. I edit the PDF by using the marquee tool to select an area in the PDF that I want to delete. I delete it once the area is selected. Then I save the PDF using "save as...". Set the format to PDF, then hit "save". Pops up "Save Adobe PDF" hit "Save PDF".
When I print off the original version of the PDF compared to the edited one the quality is a bit off. It fills up more space on the paper also. The first one is darker and overall crisper. Is there something I missed when saving the PDF to keep the same quality as it was before I edited it?
View 7 Replies
View Related
Feb 17, 2008
I was working at a res. of 300 and when i scaled it to full size (res. of 72) the text prints out pixelated? Its not to bad from 2 feet away but when your up within a foot you can see the square pixels. However on the screen the text looks crisp until you zoom in 200%.
View 5 Replies
View Related
Oct 21, 2007
I am trying to save an original vector psd to a jpg, however it is coming out with compression on it. I am saving it as maximum quaility level 12, but it still appears. Any ideas what else is causing this?
View 3 Replies
View Related
Sep 4, 2004
i don't know if PSG covers this, but how can i print the quality of what i see in on my screen. (actually this is my moms prob.) i only do the photo retouching for her.
the prints doesn't match the qualty on screen. on screen, it looks better.
View 3 Replies
View Related
Oct 29, 2007
how they are getting this high of quality out of a GIF? I thought GIF was limited to 256 colors? The gradients and shadowing look great for this file type, and it is 125KB.
View 1 Replies
View Related
Jul 3, 2007
This is blurred.. Its a picture i really wanted aswell, how to improve the quality a little?
View 2 Replies
View Related
Oct 21, 2006
First when I talk about printing I DO NOT print on my home printer rather I send photos to a photo studio (digitally, of course).
View 9 Replies
View Related
May 27, 2006
I'm using a Coolpix 8800 and I am increasingly disatisfied with the results. Very few of the images that I take with this camera appear to me to be properly in focus. They seem to have a sort of soft focus effect.
This sort of chimes with a review I read recently in a magazine which gave it very poor ratings for the autofocus.
I am also not sure if I am expecting too much from it? Many images seem fine when viewed as fitted to screen or print size (viewing on LCD montior 1280/1024 screen resolution) but it's when viewing actual pixels that what I think is the poor results of autofocus are shown. Is something like screen resolution introducing an effect here that is illusory?
I'm shooting tif files and editing in CS2.
View 7 Replies
View Related
Dec 29, 2006
i've created a logo for my company but I'm trying to sharpen it up quit a bit for the web and also for printing.
I've tried increasing the dpi up to 600.
View 1 Replies
View Related
Aug 13, 2006
I am resizeing and optamizing my .jpg pics. I would like to know the best way to get a clear quality pic. I was taugh to do - sharpen (unshapern mask option- is this the best option to use?) then use levels, and finally adjust brighness and contrast. Is there a better way, and is there anyway to reduce the blur in a .jpg if there is some motion in the shot?
View 3 Replies
View Related
Nov 11, 2006
i have a picture and id like to make it better quality it was taken off a camera on a cellphone, and it like to make it better quality, how would i do this?
View 3 Replies
View Related
Feb 29, 2004
When I make an illustration in Illustrator, how do I save it for the best quality? Not in flash but in a format that can be displayed on an html site. Any tips and tricks, case am really having trouble do get the same quality on my things if you compare to other high quality sites.
View 3 Replies
View Related
Jun 13, 2006
I have this header that I want to go on a bunch if peices of paper, but even when i've made the pciture size 8.5 by 11 inches I have never had anything I print out print out at hte quality of the computer. Its either pixelated or not 8.5 x 11 inches,
View 3 Replies
View Related
Sep 3, 2007
I have a picture that I added text to on photoshop and when I go to save the picture it ends up being in bad quality, how can I make it save with good quality?
View 1 Replies
View Related
Jul 21, 2008
I open an image in Photoshop CS3 and do a file / print to my HP laserjet 1300 black an white printer. The image prints out with a halftone pattern with little dots visible all over the place.
If I place the same image without any changes into Illustrator and do a file / print form there, the image comes out looking like a black and white photograph with none of the dots / halftone pattern of the photoshop image.
I want it to look like a photograph. I do not want the halftone / dots.
Maybe just some photoshop setting that I need in order to print nice looking images from Photoshop CS3 to this printer rather than having to get Illustrator involved?
View 11 Replies
View Related
Dec 20, 2012
I was wondering if after drawing an alignment, creating a profile, and profile view, is there a way I can mark items along the alignment so they could show up in the profile view. I am laying out a pipeline and want to have the profile display a marker for items such as tees, elbows, reducers and other items. The marker I would like to use will be something like the vertical style grade break markers.
Also on a side note, as each of these items will have a different name, is there a way that I can add these markers and then have each one with a unique name?
View 9 Replies
View Related
Jun 21, 2013
Is there a way to get sheet number of the base view for the Selected Child view (Mainly for Section. Detail Views). Because the Section views, Detail views (initially they would have created on the same sheet where the parent is, then they moved to different sheets). So we place the parent view sheet number.
View 1 Replies
View Related
Jun 27, 2012
I started with a Left side view of a part and created a sectioned view right down the middle so you can see the insides from another view. the part is pretty big so i used a Break to shorten it to fit the page. I also placed a smaller and separate isometric view of the same part and want this view to inherit the same break. How can I do this? If I go into the display options of the iso view, all the cut inheritance options are grayed out and can't be clicked. I've seen this done before, but i'm sure i missed a step somewhere.
Inventor Professional 2013
Intel Xeon W3680 @ 3.33Ghz
12GB DDR3 RAM
NVIDIA Quadro 2000 GPU
Windows 7 Professinal 64-bit
View 4 Replies
View Related
Nov 28, 2012
1. I had trouble with profile view of the alignment line shown. What step am i missing? Are there things that is turned off?
2. How can I best come up with the right volume to fill.
3. Do I need to learn the grading tools? or could i get buy with a section profile from the alignment. ( it is not even an alignment yet)
4. How to I render a rock fill in this cave-in.
The attached aerial image , has survey or cogo points that are imported to surface, to become surface points. . So I wanted to create a surface profile below and an outline of fill above it. Iideally the side profile would look like a trapezoid, where the base is the surface proile and top would be the design embankment.
But the reason , a surveying crew went down and took shots at the shoreline and a couple shots around the cave-in walls (higher elevation on the cave-in wall cannot be surveyed, although I coud have used a laser , did not) is so that a more accurate volume of the cave in can be obtained. I tried to label how far the road edge is from edge of the cave-in . Norice the higher elevations are the top edge around the cave in area.
The ouline for the embankment will be a mild slope then breaks to a more steep slope. like 4 :1 , then 1.5:1
View 5 Replies
View Related
