when I convert an image to a smart object liquify becomes greyed out (along with some other filters) Im using the subscription version of photoshop CS6 so the software is up to date.
Im working on a quad core mac pro with a ATI Radeon HD 5770 graphics card.
Here's the situation: I've liquified a smart object but I did all the liquifying at the wrong size - the smart object is not at 100% size (my fault for not opening the smart and dragging it back out at 100%). I need to retain the liquifying (and any warping) exactly as it is, and size up the smart object to 100%. Is there any way to do this accurately? It doesn't matter if it's a big/long workaround, as long as it doesn't involve me redoing the liquify, which will never get me the exact same shape.
View 11 Replies View RelatedIn Kelby's "Hidden Gems" of CS6, he converts the image to a smart object using the filter menu "convert for smart objects" before he uses the Liquify filter, thus adding a Liquify mask and the ability to go back and edit Liqify. When I open a Raw file and convert to smart object, it greys out the Liquify filter.
Liquify is only available before adding the smart filter. What's wrong with this? I'm on a Mac 10.8.2
Liquify as a Smart Filter is definitively a long waited feature but I found an issue with it. I made smart object from a layer, applied Liquify, next I change the document ratio with Crop tool...You see, completely different pixels are liquified now. Dissapointing I've reported the issue already.
View 26 Replies View RelatedUsing Photoshop CS5 - after scaling a smart object do I need to remake it as a smart object again?
View 3 Replies View RelatedI updated my PS to 13.03. I saw an Adobe video saying now Liquify Tool can have a smart filter so I want to give it a try. I couldn't get my Smart Filter working for Liquify Tool.
Â
I converted my RGB image to Smart Filter under Filter menu. I then tried to choose Liquify Tool but this option is disabled. Is my version 13.03 still not up-to-dated.
I'm having an issue which is repeated on various machines running PS CC on bother Mavericks and Mountain Lion.
Â
- I have multiple documents which have a smart Liquify within each...
Â
- I make an adjustment curve on one, and need to drag it to the other open documents - as I do this the mesh data is read again and liquify re applied - but usually applies it incorrectly - this occurs irrelevant of image size, whether the document has image outside the crop area, I've tried selecting canvas before liquifying and before applying curve...
Â
I can solve this by rasterising the smart object on the recepient file - but this isn't ideal for the smart object work flow.
I have subscribed to CC and smart filter support for blur and liquify are not working. I have first deactivated and reactivated PS CS6 extended and then tried uninstalling and reinstalling from my CC account. Neither method worked.
View 12 Replies View Related1. Is there a way for masking each smart filter separately on a single smart object other than nesting one smart object into the another?
2. Is there a way for removing the previously created smart object?
I mean ... let's say I have a smart object containing four layers. Can I remove smart object from these layers?
Why doesnt the smart filter mask move with the smart object?
View 14 Replies View RelatedI am trying to get photoshop to combine some objects in the stacked photos. I do not understand why after selecting all the various smart objects which are layered, and going to Layers- smart objects - stack mode is greyed out.
View 5 Replies View RelatedSuddenly the Smart fix button (when rightclick on clip) is grayed out. I was using it ok previously to brighten a clip that was too dark. It was working fine.
View 2 Replies View RelatedI'm running photoshop cs3. I created two different smart objects. Within each of those smart objects, I want to include another smart object. However, when I update the embedded smart object, only the partent SO is updated, the other SO seems to have a different child. here is the setup visually: canvas -> SO1 -> SO3canvas -> SO2 -> SO3 so when I update SO3 from within SO1, only SO1 is updated - SO2 stays the same.
View 9 Replies View RelatedPs CS6
OSX 10.6.8
Â
Problem: Transform applied to Smart Object fails to transform an attached Smart Filters Mask.
Â
I mean a Transform, including Free Transform, as found in the Edit menu. A simple move by the Move Tool is OK.
Â
A workaround until this bug is squashed is to encapsulate the Smart Object + Smart Filters + Filter Mask inside another Smart Object and transform that.However, that will not be a satisfactory solution in some cases. If a filter has size parameter(s), e.g. Gaussian Blur radius, a scaling or warping/distorting transform applied after the filter will obviously differ from the filter applied after the transform.
Â
In any case, the workaround is inconvenient to subsequent editing and experimenting with filters and masks.
I render 3d object from raster and smart object (extrusion) Each time i do the edge where the extrusion meets the front inflation material is slightly distorted. Should be a smooth line.
View 20 Replies View Relatedi noticed importing an image file from adobe illustrator into photoshop through copy and paste. but i dont have illustrator on my pc. is there a way to turn a layer or an image into a smart object without using the bridge feature they have now in CS2?
i just want to make an image into a smart object.
in cs2, i use smart object lot to replace image i mean i have to make collection of gallery of let's say mp3 albums so i have to put albums covers in my designs but exactly as i wanted in size {no matter whatever size/resolution the source (album cover) are} so smart objects always be the easiest way cos i firstly draw rectangulers in my custum size, and i covert each rectangulers to smart objects and replace every smart objects to place those albums covers. it's easiest way and since cs3 is launched, when i try to replace image of smart objects my replaced image(album cover) wont be as equal as my custum rectanguler size. this is my prob. when i place the images either they are placed bigger size than the size of smart object or smaller than smart object . can is there any process to make as shame size as smart object while placing images to smart object??? in cs2 it's possible but cs3 cs4 can't do such smart object or i'm a missing any new technique to do that? ya we can resize each placed covers to our custom size but it takes hell long time . i need shortcut way. wel in cs2 i been doin things like this using smart object which takes only 2 min to put images in my custom sized rectangular
View 7 Replies View RelatedI am trying to open a RAW photo in Photoshop CS5 as a Smart Object. I have the photo selected in Bridge. When I go to execute File>Place in Bridge CS5 the menu entry indicates there should be a menu displayed. However, clicking on Place does not bring up a menu.Â
Â
In Photoshop there is open a blank file to receive the photo.Why do I not receive a menu?
I'm having aliasing issue with my smart objects in CS6 I never had before. I've searched all over PS and these forums to try and figure out how to get rid of the jaggies, with no luck. Below is a screenshot example of a SO with the aliasing (I'm trying to reconstruct a dresser top).
View 5 Replies View RelatedI have a smart object, and, If I apply Control "J" Â Â Or Drag It to the New Layer Icon, It will Duplicate the Layer.And If I Go to Layer-Smart Objects- New Object Via Copy, It dose the same thing.What Is the Different between Control J, or Go to Layer- Smart Objects- New Smart Object Via Copy.
View 2 Replies View RelatedOften after making vectro pictures in illustrator i use exporting to Photoshop like a SO. But i can't realize, why after exporting some elements like a blur or transparent mask is losing?
View 2 Replies View RelatedI working on the Photoshop with Smart Object with link to Illustrator. How can i transform perspective for Smart Object in Photoshop? There are accessible to me only Scale Rotate and Skew, others is gray out.
View 3 Replies View RelatedThe transform tools work once, then I have to quit and reopen for it to work the next time I place a smart object.
View 2 Replies View RelatedI was playing around with some images that I changed into Smart Object, and I noticed when you shrink the Images to a very small size, and later Transform It back to a bigger size, the quality dose not change,,Even when I saved them and opened them later on. But It dose not work with saving the Smart Object into JPG.
View 1 Replies View RelatedIs there a way to get Smart Objects to work on a different disc besides your Startup on a Mac? I'd like to set up a stand-alone SSD to handle all Smart Object operations. Currently, I'm getting the "Start-up disc is almost full" warning a little too often. It even crashed PS one time. I know you can change the Scratch Disc very easily, but I don't see any way to change how Smart Objects are handled.
View 16 Replies View RelatedI have a 'base' file A, with two (different) smart objects B and C. Now I want B and C to both contain a third smart object D, and I can't get that to work.
I can place the same file as a smart object in B and C, but it becomes two different smart objects, which are seperately editable. I would like to be able to edit smart object D and the changes to be visible in both B and C and in turn in A.
Â
Is this at all possible? Btw working in photoshop CS5
I was told to double click the layers window and a new editable window would pop up...but only the FX window pops up. I've also tried the "edit Content" choice but that erases the smart object..
View 4 Replies View RelatedI need a smart object mask, I converted the layer to a smart object, using the mask panel to add a mask, I'm not getting a smart object mask instead a regular layer mask. I searched the adobe documentation.
View 5 Replies View RelatedI have two tabs open: the first one the "parent file" and the second one the "smart object" from a layer of the "parent file". I accidentally "unsmart" the object on the "parent file" and close both tabs...
Â
Question: Is there a way to recover a closed smart object in photoshop? In photoshop directory?
I'm currently working on a mock up for a product design, a box container to be precise,And I want one smart object layer to cover both the front and the side, so you can seamlessly design the front and side of the box.
Sadly I haven't found a good way to do this, thought i would be able to with warp but I can't get straight corners with it,
When i have a project that contain a lot of the same images i normally create one Smart Object and copy/paste it as many times as i need to. This way when i have to change something i can edit the Smart Object and it will automaticly change all duplicates.
Â
For example i have created a button and i need one that has to be a different width, i can change thewidth of the Smart Object. Only this way it changes all the duplicates too. Let's say i don't want to change my previously made duplicates, i can make a copy of my Smart Object this way it does not effect my previously created buttons. This have the effect that when i need to make some changes, ill need to edit 2 buttons instead of one.
In some of my projects i have 10 different sizes of the same object only the design is left unchanged. When i need to change the color for example i have to edit this 10 imes. You would say 10 times isn't that much. That is correct. But if you made multiple changes to the Smart Object's layers, let's say i changed 4 things. I have to manually change 4 x 10 = 40 things. That could take up some time.
Â
In my case i need to have different widths of the same object everything else needs to be exactly the same. So in my perfect case i would have one smart object with different widths which i only have to change once's.
Â
Is there a way to accomplish this?
