Photoshop :: Image Cropping
Sep 14, 2004
This example is in 1024 x 768
I have this picture and i want to crop out certain area of the image. is it me or is it the crop tool that cannot do a free resizing, like the FREE TRANSFORM TOOL (CTRL+T).. From what i see, i can only edit the croping picture by clicking the Perspective check box. Is it normal ? Another problem is that the picture instead of resizing to the size of the croped measurements, it takes the original 1024 x 768 length and width and fills up that size.. in other words the cropped imaged maxmise itself to fit the whole original size pic.. i was quite sure this didnt happen when i was using Photoshop 7..
View 2 Replies
ADVERTISEMENT
Jul 1, 2013
Photoshop 6. If I crop an image in photoshop 6 it becomes a 'layer'which I then need to 'flatten' before saving as a jpg file. How do I stop this happening?
View 1 Replies
View Related
Aug 18, 2013
when I crop a picture and I want to move te framework to make a good crop, the picture oves, not he cropping-framework. I expect it is just 1 little adjustment, but I can't find it...
View 4 Replies
View Related
May 3, 2012
If I may, I'd like to know the answer to this. For my own edification....
I have an image that is 16 x 24 inches. It has a certain file size.
When I crop the image with the cropping tool, and set the tool to 16 inches wide by 24 inches high, the image file size increases significantly.
Is this what is called "resampling?" The setting in the image size is set for Bicubic (for smooth gradients).
As an example, I saved the file (from a RAW conversion to jpg), and it was 14 Mb. When I cropped it, it jumped to 19 Mb.
View 6 Replies
View Related
Jul 24, 2009
is this possibile? I want to leave no extra areas or canvas space0 around my image.
View 5 Replies
View Related
Aug 12, 2004
i'm trying to cut out apicture of a guy from a back ground. the trouble is it's very hard to do due to hair etc.
how important is it to knock out as much background as possible. i've done this sort o fthing before with fantastic results, but this image is really tricky
View 9 Replies
View Related
Jul 13, 2013
Is it possible to use the crop tool but have an image fill overlay instead of a grid overlay? I do a lot of photo editing where the image has to be in certain boundaries but also has a complicated background, and I'd like to reduce a step.
View 3 Replies
View Related
Apr 24, 2013
I have a psd with 15 layers inside. All the layers are icons and some of these have a bit of whitespace and I wanted to crop each icon to clean it up.
I tried to select the layer and use the rectangular marquee and then hitting crop. All this does is crop the entire psd.
There should be a way to do what I'm trying to do without having to copy the actua layer into a new doc crop there then add it back in am I right?
View 2 Replies
View Related
Nov 29, 2013
When using the crop tool, and I expand the cropped area outside the original image, the image disappears and the area turns white. How do I turn what ever "feature" this is off?
View 2 Replies
View Related
Mar 29, 2005
Recently I have started to get in to photography with my digital camera. I have noticed that if you rotate a jpeg 90 degrees or whatever that the file size goes down.
Is there anyway to stop this and if so, how?
View 9 Replies
View Related
Mar 17, 2006
Two times in the last 15 minutes Photoshop CS has caused my Mac to crash.
It happens when I try to crop an image. I am trying to crop a .tif using the crop tool constrained to the proportion of 720x480 at 300ppi.
A few weeks ago Photoshop CS was telling me that my scratch disks were full and wouldn't allow me to crop. I checked the scratch disk designation in the preferences of Photoshop CS and it was totally fine... 27 gigs of room, which should be MORE than enough.
View 5 Replies
View Related
Jan 26, 2013
Just installed Elements 11 on a new Asus ET2300 all-in-one with Windows 8. Resolution is set at a recommended 1920x1080. I opened a jpeg in Elements and cropped the image to a square, but when I hit Print, what I see on the print set-up screen (and what actually prints) is an image with a good part of the top and bottom missing (although there is also a small image in the upper left corner that looks intact). I tried setting the computer resolution to 1600x900 and the image was severely cropped on the sides. If I choose one of the other resolution options, I guess that I might get a square or something close to it, but I assume that will effect my results in viewing venues.
View 6 Replies
View Related
Sep 14, 2012
When I try to crop in CS6 the image turns negative until I finish the crop when it goes back to positive.
View 1 Replies
View Related
Apr 13, 2013
Using Photoshop CS6, is it possible to crop a JPEG image without compressions it when I save it?
View 2 Replies
View Related
Apr 2, 2012
My designer wants a retainer of $3,000 but I can do most of my own stuff in Photoshop. Sometimes I get stumped though, and just need a 30 second tutorial. So I am coming here.
how to change it from a square image to one with a rounded top and bottom-right corner. Also a 2 pixel shadow going up the right side and along the bottom. I can manually draw in those two pixels easily enough. But the corners look terrible when I try to manually do it.
I have been cropping the new image to the proper size, and then drawing in the two pixel fade on the side and bottom. Then trying to pixel by pixel create the rounded edges.
Before you say "Its a drop shadow!" please remember, in order for me to copy that exact drop shadow, I would need to know all their settings, colors, pixel widths, etc. All I have is a flat, finished image, so I have none of that information. Plus, I don't know how to do a drop shadow on a curved corner, which deletes the original squared corner on the image.
View 2 Replies
View Related
Mar 15, 2011
I must have accidentally changed a setting as now, after I crop an image, I appears much smaller and when I try to resize it back it's very distorted. How can I fix this?
View 3 Replies
View Related
Oct 28, 2006
Does anyone know how I can crop an image, but keep the original proportions of the image? Is there a way to crop and manually set the crop size?
View 3 Replies
View Related
Oct 27, 2007
Is there a way to view the preview size of an image while cropping, meaning while the marching ants are around the selection, can I see the image size?
2nd Question:
Can I preset a cropped size and drag it around until I find the area I want to select to crop?
I do have rulers showing and use them as guides, but this is not detailed enough, at this point.
View 2 Replies
View Related
Sep 3, 2012
I need to crop a slightly non-rectangular, four-sided image (a photo of a picture in a frame) and end up with a rectangular image. I've tried cropping and lassoing but nothing seems to do the job. how I might do this on PSE.
View 15 Replies
View Related
Mar 12, 2012
When cropping an image by using a specified W and H in the Crop options that are larger than the image, is Photoshop actually increasing the W and H of the image by stretching those pixels?
View 14 Replies
View Related
Jun 12, 2013
I need to create an action to resize several hundred horizontal images. Each image must be sized to a specific width and then cropped to a specific height. When I crop the image, I need to adjust the cropping box to accommodate the image content. Then I will save the image as a new file.
How do I a create a pause in the action so I can position the crop manually before I save the image?
View 1 Replies
View Related
Sep 7, 2013
I need to scale an image of a floor plan without cropping it. I know a specific dimension in the floor plan and need to scale the whole image without cropping to that specific dimension.
View 1 Replies
View Related
Jun 10, 2011
I am working on a project at the moment, which entails cropping irregular shapes and bringing all the shapes together to form one finished image. I have added an example of the images that I am using.
I have managed to lasso an element from this sheet, but don't know how to take that element and put it on a nice new white background/sheet then take other elements from this page and other pages that I have, then create a new image from all the elements.
View 9 Replies
View Related
May 6, 2012
In Photoshop CS6, the moment you select the Crop Tool, a "cropping bounding box" appears instantly over the image. This didn't happen in CS5. In CS5 I would be able to click and start dragging the Crop Tool 'outside' the image and then drag into it so that my "cropping bounding box" (don't know what to call it) would snap to the edges of the image.
In CS6, since this box is automatically there already over the entire image, clicking outside the image invokes some unwanted rotation action.
View 3 Replies
View Related
Dec 11, 2011
Is cropping to a larger image the same thing as resampling...? I believe I was told it handled the information differently without adding extra pixels... is this true.?
View 3 Replies
View Related
Sep 9, 2004
Whenever I try to use the Crop Tool, it only stretches out to a small portion of the image and refuses to stretch down any farther.
View 2 Replies
View Related
Mar 2, 2012
I am using Photoshop CS5 with all current updates installed on a Mac running Lion. I am having a problem with the handling of the camera raw format (specifically .arw) and how Photoshop handles the format.
My first issue is that upon loading the format into Photoshop, the program is cropping a bit of the image from both the left and the right. I have not found a way to stop this from happening.
Another issue is file size. A client is having issue with the file size presented. They are providing me an ARW file that is 14.8 MB and I am making edits and provided them with a large jpg from photoshop (jpg qaulity turned all the way up) and they are getting a jpg at 9.7 MB. They are concerned that I am giving them a less than quality result.
I know that any conversion from a camera raw format to a high resolution jpg will result in a lower file size and that has been explained however the client has taken the raw format parsed it through Mac Preview, saved it, and resulted in a larger file size than I could provide in Photoshop.
This then becomes a confusing situation to handle.
Questions:
a) How to explain the lower file size happening in Photoshop to the client (what is lost?)
b) Why they can use mac preview and get a larger file size that I can at full resolution jpg in Photoshop?
c) Is there a way I can make this client happy without moving to a tif file format?
d. Why is Photoshop cropping the .arw file?
View 6 Replies
View Related
Aug 12, 2013
I am trying to crop or resize an image that is originally 2,122 x 1,415 px | 7.1 x 4.7 in | 300 dpi. I am to crop/resize image to fit 756 x 275 px. However, I don't want to lose the whole image. I would like to use the whole image just adjust it to the dimensions.
How can I accomplish this without creating any distortion or by removing elements by cropping the image?
View 5 Replies
View Related
Apr 26, 2013
Why does my screen flicker when cropping and image turn solid black so I can not see image?
View 5 Replies
View Related
Jul 21, 2012
After cropping a photo in cs4 i have tried hitting the return key as well as edit/crop and then my photo disappears and the image box reduces in size to about 1 inch square with no image. I have expanded the image box but nil photo. This has never happened before.
I reloaded cs4 onto my computer but the problem still exists. I have also tried out opening the file from Bridge as well as Photoshop with the same result.
View 7 Replies
View Related
Dec 30, 2010
My camera (Canon HV30) captures a larger image than what displays in the viewfinder. So after downloading the footage, I realized that there was some clutter around the edges I didn't see in camera.
I've been trying to find a way to "crop" the image to get rid of the clutter. I don't want the overall size reduced, just the image zoomed in to fill the frame without clutter.
View 4 Replies
View Related
