I reinstalled my photoshop and now I can't save in JPEG formats. I did an 10 hour work and I have to send it to my clients but they only accpet JPEG formats. someone please help.
(I'm currently using Photoshop CS 8.0) ...
I have been using Photoshop for about 20 years. It isn't our primary software, but it is very important to our business, as some clients do not know how or cannot use Reader. In such cases, I used to save the PDF's as JPG's or other acceptable formats available in the Photoshop program. It was very handy. My old Photoshop was working very well with the XP version of Japanese Windows, even though it was an English version of the program. Unfortunately, I had to upgrade from XP to Windows 7 due to XP becoming obsolete. On top of that I lost somewhere my old disc with Photoshop on it, but I assume that it wouldn't work with the new OS anyway because of its age? I decided to buy a new version and to have a better idea of what it looks like these days, I tried to upload the trial version of Photoshop CC from the net. It went well, but I have a huge problem with it. It is all in Japanese. Although I live in Japan and speak the language, I cannot read the squiggles, especially the professional ones. I need to have all the program commands in E for the program to work for me, otherwise, you will agree, there is no point in spending that sort of cash. Can I download an E version from somewhere? I tried everything, but the only download page I can get from Japan is in Japanese. Will the E version work with the J Windows 7? Is there any way to change the J commands to E?
View 2 Replies View RelatedI just downloaded GIMP 2.8.2 for MAC and I'm trying to export a file to other formats (PGN, JPEG etc. The export image window greys out and nothing happens for many minutes.
I finally give up and I get this error: Saving '/Users/muladhara2004/Desktop/filename.png' failed: Procedure 'file-png-save-defaults' returned no return values
A photo (a complex one with different layers) that was originally saved as a jpeg (100% quality) but after changing its size, saved as a png, is now used on another png photo.
When saving the end result as one photo with the png format as well, is that going to cause problems^^ with regards to print quality or not?
As it basically means a kind of mix and matching of jpeg and png formats.
I take images in raw+jpeg formats. Can I use copy as dng to import those images? What happens to the jpeg files?
View 3 Replies View RelatedI am a illustrator who needs to save files in different formats. Like 1 with a watermark, one small one for the website, another one for shop, a pdf file for the prints, etc. Is there a way to do all those things at once? Cause it really takes a lot of time.
I make my illustrations in Photoshop, but if it's necessary to only do those thing in another adobe program, than that's no problem.
there are several file formats missing in the save as menu in CC save for web gives you the opportunities but takes tripple the time...add file formats in the save as menu!
View 12 Replies View RelatedI was trying to send a bunch of images by e-mail for my wife this morning. They were images of her jewelery she was sending to galleries.
All but 2 of them I sent as .jpg files (to keep the size lower) but 2 of them were .tif files to start with, and when I opened them in Photoshop CS2 and sized them, it wouldn't let me save them as .jpg files, in fact the save options were limited to a few formats like ,png etc.
I looked for a reason but I didn't see anything different about these files.
They were in 16 bit RGB color mode.
I saved them as .psd files and then reopened them and tried again but the formats were still limited.
The rest of the images gave me the full span of save formats.
There are so many save as options. I'd like to remove some to make scrolling down to the ones I only use such as jpeg, Tiff, PSD etc.
Research brought up this option, but before I blunder in are there any risks to this method or is there another "more approved" method?
I got this workflow,
1) From LR export to PS
2) Do all essential editings.
3) Save. File become 'xyz.tiff' now. (I want to keep this as master copy)
4) Crop to 4r, Save a Jpeg copy as 'xyz 4r.jpg'
5) PS save it as a copy, but do not automatically open the Jpeg copy. The tiff remains opened. I have to manullay Open, browse to it, and open the Jpeg. The 'Open Recent' list also do not list 'xyz 4r.jpg'.
6) Do 4r sharpening for the 'xyz 4r.jpg', save it.
Basically the files I want to keep and worked on is like this: NEF -> xyz.tiff -> xyz 4r.jpg -> xyz sml.jpg(maybe)
Now, it there a way in step (5) to have PS save the JPEG copy, and automatically open it? I don't care if the Tiff copy remains opened or not, I am done with it.
I got a new computer (Windows 7) at work this April and as of today, when I work on any of my JPEG images in PS CS5,suddenly it has defaulted its "Save As" to JPEG2000. How did this default change and how do I get it to default save as. JPEG again? There was nothing I noticed and no warning as to why this has changed, I didn't touch a thing!
(Last week, Adobe had to work with our IT manager to fix a problem that started occuring with my new Adobe Acrobat Pro 11 program. They had to log into my computer and change a registry thing to get it to work properly again...also something that changed without warning!!)
I am trying to save a CorelDraw X5 file in Adobe Illustrator, so I can bring it into Illustrator CS4 to work on it in Illustrator.
It will only save in CDR format. Whatever different file format I try I get a message "No object to Print, Export, or Save" I originally grouped it and saved it in CDR.
I have the following
strFile = ThisDoc.FileName(False) & "-Rev " & iProperties.Value("Project", "Revision Number")ThisDoc.Document.SaveAs(strFile & (".dwg"), True)ThisDoc.Document.SaveAs(strFile & (".pdf"), True)
And it works like a charm for pdf, but it does not export to .dwg?
And also, is it possible to decide where in the name the "-Rev " &iPro....should appear?
Ex. if the filename should be : "12345 - Rev 02 - Section cut"
Is there a way to remove some of the "save as" file formats from the list (when saving a file as...)? After numerous years in my field, there are a number of file formats I have - and probably never will - need to save my files as. If I could remove some of them, then it would speed up my workflow (so that I don't have to scroll down every time I save a file).
View 6 Replies View Relatedin my autocad 2014 save as in 2007 & 2004 format system is not responding and not able to finish. but when i save in 2013 and 2010 format is ok. i install same copy of autocad in my laptop its working good.
my system config: operating system - w7 64bit
8gb ram and 1tb hard disk
From the start, I wasn't able to save to jpeg without getting a dcm extension (no jpg extension). However, if I saved to Multi-picture Format, I would get the familiar .jpg and everything worked fine for a while. This morning I cannot find a file format in "save as" that results in the .jpg file extension.
View 2 Replies View RelatedWhen I select "Save As" or "Export", the list of available file formats is only a fraction of what the help file shows as supported file formats. The help file instructs me to use the instructions in "To modify or repair a CorelDRAW Graphics Suite installation" but this does not work. How can I get or verify that all the file format filters listed in Supported file formats are installed in my CorelDraw 15?
Right now I am particularly interested in saving a CDR in the Visio (VSD) file format, but I would like to have of them available.
When I save my renders in 8-bit tiff formats, the images are slightly blurred. They do not look as crisp as in the render window.
View 1 Replies View RelatedI have a PSD file (16bits/prophoto RGB) with some layers. I combine the layers to ONE and change the bit depth to 8 bits.
Then I do one of two things:
(a) I save the file for the web in JPEG 90% high-quality and with sRGB ... filesize 340 602
(b) I change the color profile to sRGB and save the file as JPEG in the highest quality (10) ... filesize 174 549
I am at loss here. How on earth is it possible that the second file is almost half the size as the one saved for the web?What effect causes this? It is very easy to save for yhe web but as long as the JPEGs are that bigger it's no option.
when im about to save my file *project* nothings happen
View 2 Replies View RelatedI am working on many files today and for some reason, even though they are JPG files, when I save them, the dialog box comes up and wants to save it as a PSD. It's wasting a TON of time because I have to change it to JPG even though the file is already. I tried the open as-JPG option on any of them and it gives me the error message of -"Could not complete your request because the file-format module cannot parse the file". I'm in CS6 because there were too many issues with Photoshop CC.
View 12 Replies View RelatedI got a file that's only let me do Save for Web in jpg format. I choose png24, click save and it changes to jpg in the save dialog. Then I created a blank doc, copy everything from the problem file over to the new file and I can Save for Web in png just fine.
View 4 Replies View Relatedi just installed my new Photoshop cs6 (with the design standard package, student edition), and set about to make some graphics.
i selected a new file, 300ppi, and set to work.
after a while, i flatten the image and go to save when i go to save drop down, i get a bunch of odd cool-sounding options, raw, and tiff.seeing as i just made a normal no-frills graphic, i choose tiff.
when i re-open image, i get a really crappy version of the image, with some odd color bars to one side.
Is it possible to save a 15-20MB raw file to 25MB or more jpeg?
View 1 Replies View RelatedWhen ever I try and save as a png or jpeg photoshop cc crashes and the file doesn't save. Also there is a warning button next to save that when i click it it says:
"the current file format must be saved as a copy because: It will not save all the document layers."
I just finished creating a multi-layered document with photos and text and tried to save it as a JPEG so that I could use it in a slide show.I had done this a couple of days earlier and now PS6 won't let me.
The only option is a GIF which looks lousy.The only thing I can think of is that I've recently downloaded ACR 7.1beta.
CS4, Mac OS X 10.7.5. JPEG is suddenly no longer offered as an option. Save for web still works, but I want to export a large image (not for web) using Save As... which I could always do previouly. I can't see a plug-in for it in the File Formats folder, but I don't know whether it used a separate plug-in anyway.
View 6 Replies View RelatedI just got CS2. I am running it on Vista. I can not save in JPEG. Is there a plug in or somthing to let me save in jpeg?
View 5 Replies View RelatedI can't save my work in Photoshop CS3 as Jpeg....?
I've tried everything, but it wont work -_-' The onyl things i can choose from in the "save as" menu is wierd formats i can't reccon..
I just bought a mac, so I am completely mac stupid. I am having to learn everything all over again. I am running photoshop cs and when i go to save a pic as a jpeg, I then go to the folder that I saved it to and its not there. I can find it by typing the file name in the search menu. But when I click on it from there it keeps opening it up in photoshop. It shouldnt do that because its supposed to be just a regular jpeg.
View 2 Replies View RelatedI cannot save some images I've edited in the JPEG Format. Although I choose JPEG and overwrite the proposed filename (always xy.psd (!), I've selected already JPEG Format) with something like xy.jpg, the file is saved in photoshop fileformat (the file is something like 25mb big, it has the ending jpg but cannot be read from another application like ms paint -> original size of image is about 3 megs, jpg fileformat...). I also don't get the dialog box where I can choose the settings (like quality..).
View 7 Replies View Related