Photoshop Elements :: Add GPS Information To Photo (From External Device Or Google Earth)?
Oct 4, 2013It is possible to add GPS information to photo (e.g. from external device or Google Earth)?
View 2 Replies
ADVERTISEMENT
AutoCAD 2013 :: Overlay With Google Earth Or Google Map
May 8, 2012I am using Autocad LT 2013. I wish to use Autocad to draw subdivision lines and need to overlay satellite imagery (Google Earth or Google Maps) in tandem with Garmin GPS waypoints taken in the field.
In the 'type a command' ribbon, when I type in 'GEOGRAPHICLOCATION' and select 'Import the current location from Google Earth' (opens Google Earth, where you can retrieve a location to import).
Then a window appears which says 'Navigate to the location in Google Earth that you want to import before continuing (for best results, configure the view in Google Earth to look directly over the location that you want to import).
When I select 'continue' the command ribbon asks that I, 'select a point for the location <0, 0, 0>:
I have looked at the co-ordinates on google earth and attempted to enter but it does not feel right. Then says 'specify the north direction or (angle):s, then 'Point or option keyword required'.
Any way to have the ability to draw subdivision lines on satellite imagery. Garmin's Basecamp will allow drawing on top of google earth but I do not want tracks, I will only use the waypoints made by the gps device, but I need to draw measured lines that reflect the co-ordinates of the location.
AutoCad :: Overlay With Google Earth Or Google Map?
May 8, 2012I am using Autocad LT 2013. I wish to use Autocad to draw subdivision lines and need to overlay satellite imagery (Google Earth or Google Maps) in tandem with Garmin GPS waypoints taken in the field.
In the 'type a command' ribbon, when I type in 'GEOGRAPHICLOCATION' and select 'Import the current location from Google Earth' (opens Google Earth, where you can retrieve a location to import).
Then a window appears which says 'Navigate to the location in Google Earth that you want to import before continuing (for best results, configure the view in Google Earth to look directly over the location that you want to import).
When I select 'continue' the command ribbon asks that I, 'select a point for the location <0, 0, 0>:
I have looked at the co-ordinates on google earth and attempted to enter but it does not feel right. Then says 'specify the north direction or (angle):s, then 'Point or option keyword required'.
way to have the ability to draw subdivision lines on satellite imagery. Garmin's Basecamp will allow drawing on top of google earth but I do not want tracks, I will only use the waypoints made by the gps device, but I need to draw measured lines that reflect the co-ordinates of the location.
Photoshop :: Google Earth Screenshot Saved As JPG
Aug 29, 2013I have Google Earth screen shot saved as a .jpg. I would like to set the scale. I know it will be crude. I have a tractor trailer that is 8.6 ft wide in the image. I'm trying to get a rough scale to add in a turf area to show folks what it will look like.
View 8 Replies View RelatedAutoCAD Map 3D :: Google Earth Extension In 32 Bit?
Apr 11, 2011I'm trying to load the Google Earth Extension in AutoCAD Map 3D 2011 on a 32 bit machine (XP)
I keep getting this error in Map: Import GE Image unknown command.
Demandload is set to 3. I have loaded the Google Earth.cuix. I have added it the support file search path.
We have it loaded on many machines that are 64 bit and have no problems. Is there something I have to do with the 32 bit machine?
AutoCAD Map 3D :: 2012 - Google Earth Extension
May 16, 2012What happened with Google Earth extension? I cannot find it in labs. I've installed Map2012 on new laptop and I'm sure I had Google Earth plug in on the old one.
with where do I find GE for Map 2012?
AutoCAD 2010 :: Google Earth Extension
Mar 22, 2012So I missed getting the extension by a day and every where I look for it just points back to the labs where it is no longer available. I used Autodesk CAD and REVIT full design suites 2012.
View 3 Replies View RelatedAutoCAD Civil 3D :: Export To Google Earth
May 9, 2012Months back I did this project with multiple surfaces and exported them to Google Earth with no problem. Today, I'm trying to update a surface with some changes. After the changes, I tried to re-export it to Google Earth, but for some reason it's coming in really small. I have my units and zones set to what they have always been.The surface is highlighted in yellow, but it should take up roughly the size of the red circle.
View 3 Replies View RelatedAutoCAD LT :: How To Convert DWG Files Onto Google Earth
Mar 27, 2012I am using AutoCAD LT 2010 and I am wondering how I can upload from my dwg file onto Google Earth? We do have one user at work who has a drawing that we believe was uploaded onto Google Earth from AutoCAD but it appears it is loaded onto Google Earth using a KMZ file. Would I need to create a KMZ plotter or am I looking in the total wrong direction when trying to get this onto Google Earth?
View 9 Replies View RelatedAutoCAD 2010 :: Google Earth Extension
Apr 19, 2012I saw a video on YouTube the Google earth extension for AutoCAD,Autodesk Labs search, but says that is not available for download, I need this plug in, extension of Google earth for AutoCad.
View 2 Replies View RelatedAutoCAD Map 3D :: Export Layer To Google Earth
Oct 15, 2010Is there a way to export a layer from Map 3D to google earth? It appears the built in google earth extension only exports linework that is part of the DWG and not GIS layers.
For example, I have arcview shapefiles of drainage areas for a storm drain report that have been connected to throught the data connect palette, and stylized through the task pane. I would think there should be an easy way to export this drainage layer directly to a KML file that can then be opened up in Google Earth. How to go about it other than converting a map to a dwg and then exporting it to GE?
AutoCAD Civil 3D :: Google Earth Importing
Feb 16, 2010I ran into a problem after just installing Civil 3D 2010 when I tried to import an image and elevation data from google earth. The message box says the following:
The Feature you are trying to use is on a network resource that is unavailable.Click OK to try again, or enter an alternate path to a folder containing the installation package 'Google Earth.msi' in the box below.
AutoCAD Map 3D :: Elevations On Grid Are Not Same As Google Earth
Mar 29, 2011When I capture the elevation data from google earth, the elevations on the grid once in Autocad Map 3D are not the same as shown in google earth. It seems that the elevation have been scaled up.
View 1 Replies View RelatedAutoCad :: Prepare Base Map By Google Earth
Mar 12, 2013I want to prepare base map by Google earth. How to prepare base map of Jeddah city only (Saudi Arabia). It show clear view of all road name etc.
How can prepared base map of Jeddah City so that it will use in our all autocad 2010 drawings.
AutoCAD Map 3D :: Google Earth Extension Compatible With Vista
Dec 29, 2011Just want to know whether Google Earth Extension is compatible for Window Vista? Because received an error message when i try to load Google Earth Extension into my AutoCAD Map 3D 2010. Below are the step that i've done:
Install Google Earth Extension - No error (so i assumed the installation success).
Appload - Successfully loaded.
Menuload - Error message occurred as shown below:
AutoCAD Map 3D :: DWG To Google Earth - Line Types And Text
Jul 21, 2011I am using the DWGPublishToGE tool in AutoCAD Map 3D 2012. I can get the images and blocks to finally show up in a fairly clear manner. I was using earlier versions of AutoCAD before and everything was exporting all choppy.
Now that I have the linework in I was hoping to accomplish two more things:
The line types aren't coming across properly (e.a.: dashed lines are continuous)The text, both within blocks and along the path, only comes in as text. It's not fixed to where it is in the drawing. For example, if I have a block with HH in it the line work comes in normally but the text part of the block does not.
See my two images I have attached. The first is the CAD version and what I am hoping to get to in GE. The second is what is happening in GE.
AutoCAD 2013 :: Importing Google Earth Image?
Aug 9, 2012I just installed 2013 on my pc yesterday. The first task I was given was to import a Google Earth image into AutoCAD to try to get some dimensions on a house for an exhibit. I open Google Earth and set my location to import, then I go to the Render tab, select Set Location, I click Import the current location from Google Earth, click Continue, then i get an error message saying Class not registered.
View 2 Replies View RelatedAutoCAD Civil 3D :: Cad To Earth - Google Image Resolution
Sep 21, 2012The AUGI Magazine (Page43) this month has information on a free download called CAD to Earth. Available Jan1, 2013. Is this the resolution to future downloading and using Google Images in our drawings?
View 6 Replies View RelatedAutoCAD Civil 3D :: Google Earth Map Insert Is Flipped
Mar 14, 2012The Google earth map image I insert into my drawing is flipped (north to south) when view in isometric. The surface I download at the same time is OK. I do modify the original surface by pasting another surface into it.
View 9 Replies View RelatedAutoCAD Civil 3D :: Google Earth Units - Elevations Are Different
Jan 22, 2013My drawing is set to state plane and feet. when I import GE the elevations are different that those reported on the GE screen. For example at a given location GE reports 538 but the c3d surface report 164 a factor of 3.28. sounds like a meter thing going on. is this normal?
64 Bit Win7 OS
Revit :: Publish True North To Google Earth
Sep 20, 2011I have been able to publish information to Google Earth without problems, but when I change the Orientation of True North in the project, the results in Google still have the project north as North.
View 3 Replies View RelatedRevit :: Project Location Points From Google Earth?
Aug 21, 2013I need to get a real location for a project in Manhattan, New York.
Does Revit have any tools to locate it.Or are there any plugins?
AutoCad :: Scaling Google Earth Screenshot That Contains A Legend
Aug 9, 2012I am trying to draw on a screen shot from Google Earth. The image has a scale legend that has a measure line that is "80ft". I try to do a scale>reference to make my line equal 80 ft but instead the line I create is "2.75 inches". So I am trying to create a scale that equals what my screen shot is.
View 9 Replies View RelatedAutoCad :: Put Profile Image Generated From Google Earth?
Feb 19, 2012Lets say I wanted to put a profile image generated from google earth (a Jpg or Bmp ) on a layer in a side view of autocad for reference, How would I insert it. I have done that with 2008 but can't do it in 2012.The image from google earth has dimensions on it so it would be easy to scale properly to my drawing. So I would like to be able to put it on my dwg. I don't know what (tags means on this page. Also I have saved the image on my computer and I have tried to show it on this post but don't know how. The image is a jpg The format of this posting is asking for a url. as you will see I tried to put C:usersonkelbobdesktopprofile.jpg below but it didn't work.
View 1 Replies View RelatedAutoCad :: Polyline To Convert It To Kml File For Use In Google Earth
Jun 8, 2011I have a polyline AutoCAD 2010 and would to convert it to a kml file for use in Google earth.
View 3 Replies View RelatedAutoCAD Map 3D :: Can Import Or Open Files Kmz (google Earth)
Feb 21, 2012You can import or open files kmz (google earth) in autocad map 3d?
View 9 Replies View RelatedAutoCad :: Copy And Paste Image From Google Earth
Aug 27, 2013For our field layouts we simply copy and paste image from google earth then scale them (using CTRL + C and CTRL + V).For some reason now, my image that was already pasted into a drawing now only shows the border of the image, not the image itself. Same story with any new images I try to paste in. How to fix this back so I can view my images?
View 6 Replies View RelatedAutoCAD Civil 3D :: Google Earth Elevation Different In GE And Import
Mar 19, 2012Is ther a setting I am missing? In GE the ground elevation is reported as 45, but on import (drawing set to state plane) the elevation is 15?
HP Z210 Workstation
Intel Xeon CPU E31240 @ 3.30 Hz
12 GB Ram
Note: Its all Resistentialism, so keep calm and carry on
64 Bit Win7 OS
AutoCAD Civil 3D :: Import Google Earth Image And Surface?
Nov 13, 2010I am trying to import a surface and Image from Google Earth. Basically my steps are as follows:
start GE and C3D find area that I need on GE and zoom in under C3D, insert GE Image and Surface (then it goes straight into select point, and rotation)
Like most discussions i've read.., the import slows down at 49%, and then it chugs for hours if I let it. So i have to cut the cord and re-start both programs.
I saw in a discussion that there are settings that we can change the rows and columns to something like 70x70.
however.... I cannot find where to update this. I typed importgesurface, and clicked on the ribbon as well..., then tried to right click, but it does not take me to the settings. I also figured that I might have to run C3d as admin, but no luck either.
find these settings so I can change them to import a surface and image that is about 15acres?
Running:
Sony Vaio
intel core i7
8GB Ram
64bit Windows 7 Pro
AutoCAD Civil 3D :: Public Conceptual Design To Google Earth
Feb 15, 2013I wanted to public this design to Google Earth, but some how the model is flat wiith existing ground. I did choose "Drape entities on ground" and also tried "elevation relative to ground" it is sitll a flat model.
View 1 Replies View RelatedAutoCAD Civil 3D :: Cut / Fill Quantities From Google Earth Surface
Jan 14, 2013I am using Civil 3D 2011 for my job. I am trying to put together preliminary estimates and need earthwork qunatities. I have no issue importing a google earth surface. I import the surface and create a boundary. How do I calculate cut/fill quantities? I tried creating a finished ground surface then making a tin volume surface to compare the two. However, I do not know how to create a fnished ground surface. I have also tried grading in civil 3d. Cannot get anyting to work.
View 4 Replies View Related
