If I import a lot of photos into Lightroom at once and they were all taken using the same lens can I enable the lens profile for them all at once? Or do I have to do this one image at a time?
View 2 RepliesCan you enable the lens profile settings for more than one image at a time? If multiple images were imported and the same lens was used for all of them can you batch process them without having to do one image at a time?
View 1 Replies View RelatedLightRoom and Camera Raw have profiles for Lens Correction and all the current available lens are in the list for the Canon 6D raw files. BUT the Filter/Lens Correction when in Photoshop CS6 only have 2 Tamron lens listed. Odd that there are lens profiles for the Canon 6D raw files in Lightroom and Camera RAW but not CS6 Filter/Lens Correction.
Camera RAW, LR and PS are up to date..... NOTE: I have a Canon 7D, G11 and 1D Mark II N and all their files work as expected. It's only RAW files created by the Canon 6D.
if it is possible to change a collection of tif-format images into jpeg with one single operation, rather than treat each image individually?
View 1 Replies View RelatedIn LR 4.4 lens correction profiles works fine for my Canon 70-200 f/4L IS USM, but when I use the Canon Extender 1.4 III with this lens there is no correction profile available.How do I obtain a profile covering this?
View 3 Replies View RelatedI can never find those lists of lens profiles to pick from, even when I go Filter>lens corrections. I remember doing this before but cant get in anywhere. When i try to go directly with lens profile downloader, this is all i get from a newly downloaded app.
View 3 Replies View RelatedUnder Lens Corrections in ACR I get the following error message : "Unable to locate a matching lens profile automatically." How do I install the known profiles as I believe the lenses I use are well known and are in the adobe list of common profiles?
View 6 Replies View RelatedI think that ACR uses same lens correction profiles with the filter in PS.
There is only one profile for Canon EF 100 mm f/2.8 L Macro IS USM, but I get two different results when correcting in PS and correcting in ACR (default lens correction mode).
differences in the Camera Lens Profiles in ACR and the Lens Correction Filter in Photoshop CS6.Reason I ask is my D800 and Nikon 14-24mm lens is detected and correction applied in ACR, but the same camera and lens combination is not recognized in the Photoshop lens correction filter. The D800 is nowhere to be found. But interestingly the profiles for the D4 are
Many folks have asked in the past when the D800 and Canon 5DM3 would be supported but all the attention has been focussed on ACR, so when will these profiles be available for Photoshop Lens Correction?
I recently formatted my mac and now i cant find where to download the correct lens profiles to camera raw. Im a photographer and its crucial i have the right ones!!
View 2 Replies View RelatedWe are possibly going to start shooting volume HDR images. Time will be a factor when shooting 4 locations a day and still having to process. Is there a way to stack the images at the end of the job like an action, then when I get back to the studio, I can tweak the images?
View 2 Replies View RelatedI have many folders that contain my NEF and PSD files, all together.
I want to setup a batch process to open up JUST the PSD files and then save elsewhere as a JPEG.
How can I open just the PSD files in an action or using Image Processor Pro?
Similarly, I want to setup another batch process that will open RAW files and allow basic editing in CAmera RAW.
I have some images which I want to increase the border pixels by about 2-3pixels. Then I want to add a shadow effect. I need to do this for around 150 images. I've tried to do it via new action/record and then batch processing but its not doing the job.
Any suggestions ?
I'm going on a scrapbooking retreat this weekend and need to develop 200+ photos and upload to CVS.com. I have all my pictures in .jpg format now but I need to get the overall size of the files under 6mb to work with CVS's website.
I know that CS2 has a batch process to take the file size to certain pixel dimension but wanted to know if anyone knew a way to do it to fit overall file size vs. dimension.
I created an action to convert a file to grayscale from RGB but when used in batch processing it opens and saves the files to the specified folder without applying the mode conversion.
If I use the action on a single file it works fine.
I have a folder of about 1000 pictures that I need to resize and save for the web. Using Photoshop CS4. The originals are all JPG files, but are saved at high resolutions and sizes. But they are not uniform in size. I need to resize each to be 200 px wide @ 72 dpi, but allow the height to vary depending upon the image dimensions. I haven't used Photoshop for a number of years. I *think* I remember the ability to walk through a series of steps and record them and then batch apply to a whole folder, but can't see a way to do that now.
I do see in the Image Processor the ability to resize and save, but it doesn't allow me to set the width and leave the height empty.
I am batching both photoshop native files and attempting .Pdf files. They are both located in the same folder.
The .psd files process correctly,(converting to jpg) to .jpg file formats. But the .pdf files don't actually save. If I use the action on these files individually, the action works fine.
We are holding a conference of sorts, and we are making name tags for everyone to hang around their necks. We have a design in photoshop. We have an excel spreadsheet with everyone's name and forum. Traditionally, the name tags were juts copied and pasted by hand, which is tedious and prone to mistakes.
is there a faster way to do this? i heard something about scripts, but i have no idea where to start. does anyone have a pointer to where i can learn it? i only want to learn the bare minimum to write THIS script, as im sure it's the only script i'll ever write for photoshop.
When, oh when, will I be able to access lens profiles for Canon 5D mark 3 in CS6. there is an update due soon (and not interested in making my own for a mainstream camera!!)
View 5 Replies View RelatedI have been using LR since it has been released in version one. I have a very modest system, Win 7 64 bit Home premium, Processor 6.6 GHz; Memory 4GB; Displaty 1680x1050.Test on export of 101 raw files from Panasonic G3 Lightroom time for rendering 15 Min approx 9 seconds per file.Export from After Shot Pro Approx 3 Min 1.87 sec per file.Both systems using only standard processing functions no Lens corrections, adjustment brush etc. just standard corrections.Just unbeliavable. I did not think I have an issue with the performance of Lghtroom but this is a revelation. I have no hangups or crashes etc.
View 4 Replies View RelatedBatch processing error.
Error: The command "Feather" is not currently available. (-25920)
End Batch
84 items being resized for the purpose of faster up/down load on my Muse web site.
Batch Photoshop processing from bridge does not work , it says no files to open using bridge select or folder select. I am not suppressing open dialog (although I tried it that way too).
View 1 Replies View RelatedAnybody able to point me in the direction of a plug-in/software that will add the filenames to a batch of 200 images and then assimilate them into a template, ready for printing?
I use CS and can do this in Picture Package a few at a time but it is a little cumbersome. I am a school photographer.
Is there a tool/script that will select the HDR triplets and automatically merge them to single output HDR files?
View 1 Replies View RelatedI have a folder (over 500) of high res tiff files which are pictures that our advertisers use in there adverts.
I need to create low res jpgs of every image, is it a case of manually doing each indivdual file or can a batch process them.. if so how?
advanced batch image processing. I need the following to happen to a folder of images:
1) All images in the folder are resized with constrained proportion to a width of 250px.
2.) They are then combined into one image file placed above each other in a column (literally, not layers). Each image also needs spacing between the other, about 20px
3.) This is then compressed as an 8 quality jpeg and exported as a new image.
So basically I have a folder of images that I want to convert into a long 'gallery' image with spacing between each.
I scan 6x6 negs on an Epson scanner and when they are done they need to be rotated 90 degrees and flipped horizontaly. I set up an action to do this (Rotate, Flip, Save and Close) and everything was going swimmingly - then recently I've started having problems. For example - I've scanned 60 images which I select in Bridge and then open them in PS CS4. I select Automate>Batch and then select my saved action and away it goes. PS chugs its way through the 60 photo's and closes them all (so it looks like they have all been processed), but when I go back to Bridge and it starts refreshing the thumbnails only 30 of them have been rotated and flipped. So then I select the remaining 30 images and batch process them - this time it only processes 15 and so on.
View 3 Replies View RelatedI shoot all my photographs at 7.1MP and would like to batch process them to a smaller size for e-mail. I have a folder with 100 7.1MP images and want to copy then resize them in a new folder keeping the image name the same. I'm hoping to resize them to 100K in size.
View 1 Replies View RelatedI recently upgraded to CS3 form CS2. Over the weekend, I spent several hours tweaking about 200 RAW images in Bridge, that I need to convert to JPGs. I used a batch action that I created some time back in CS2 to convert the images from RAW (basically open and do a Save As as JPG), but it didn't pick up any of the tweaks that I made to the images during the conversion process, because I had Ignore or Suppress Open Dialog checked. I unchecked that open and re-ran the script but am now being prompted to open each image. I then modified the action to include the open command. Running the script now still doesn't quite seem to work as I'd expected. The only tweak it seems to pick up are the crops, but it doesn't process any of the tonal/color balance tweaks. Each image has the modification icon on them, indicating that changes were made, but the Photoshop Batch command isn't using them. Any suggestions on how to get this to work? I'm also very open to any other suggestions one may have on converting adjusted Camera RAW images to JPEG.
View 2 Replies View Related1) All images in the folder are resized with constrained proportion to a width of 250px.
2.) They are then combined into one image file placed above each other in a column (literally, not layers). Each image also needs spacing between the other, about 20px
3.) This is then compressed as an 8 quality jpeg and exported as a new image.
So basically I have a folder of images that I want to convert into a long 'gallery' image with spacing between each. I know this isn't explained well, but is it at all possible?
I have been using several resizing and sharpening batch processes which have saved a resultant file at the end with a different name. In the Batch process an original folder was selected and a destination folder and the file name changed with a different custom prefix. I have been using these batch processes with no problems for years. Without warning I have noticed that all of these batches are no longer working and the end result is one file in the destination folder, ie it must me overwriting. I have tried to recreate the basic batch process again and have resorted to using both 'save; and 'save as' at the end of the process in different test batch processes and the same result happens pretty much each time, the one file after the original folder had 5 images. I have noticed that 'Save as' is not showing up in the actions of the batch process (only shows as 'Save' irrespective if you selected 'save' or 'save as'. It is like Photoshop is refusing to accept 'save as' with a new file as a valid action. I have also tried to check the override 'save as' box etc. If you edit normally in Photoshop and 'save as' for that image, there are no problems .
View 3 Replies View Related