My d800 files are corrupting in PS6. I've tried new cards and am starting to think it's the camera. the weird thing is the files can be viewed in the camera but when I import them to my computer they won't open giving a "file corrupt" error. I've tried a hired d800 and had no problems.
View 1 RepliesLightroom 4 corrupting Nikon D800 RAW files on import?
View 7 Replies View RelatedI opened about 80 CR2 RAW files in Photoshop to preview, tweak a few, and export as PSDs. Clicking the down arrow to see each pic, three different times I got the twirling beachball. After waiting a while I force quit PS and when I opened them again the file that was twirling became un-readable. PS says "File format module cannot parse the file."
View 26 Replies View RelatedMy Photoshop is corrupting files in a very destructive fashion, and it seems to be tied to the live rendering of gradients. Not just blur filters, as in this thread [URL] but opacity adjustments in layers, and hue/brightness shifts. This happens usually in files with large dimensions, but not necessarily complicated layer structures.
This type of corruption, which renders blocks, tesselated shapes, or inverts/fills odd layers, seems to be a problem for multiple users, but I haven't seen a solution.
I think I may be the first person to link it directly to the live rendering of gradients- rather than just the blur filters. Anything that has to render a gradated shift across the image seems to be the culprit. Usualy starting as a solid, and ending as a transparent. However, simply adjust hue/brightness over an opaque layer will make the corruption happen as well. Which leads me to believe that this corruption is caused by live on screen rendering of gradient shifts.
Here are my specs:
CS6 13.0.4 x 64
Mac OSX v.10.7.5
3.2 GHz Quad-Core Intel Xeon
12 GB 1066 MHz DDR3
We just got brand new systems at work less than a month ago and this event has happened twice since then. When using Photoshop CS5 Extended and using Gaussian blur the file becomes block and all layers as well as their masks become corrupted with these blocks.
Here are my system specs...
Model Name: Mac Pro Model Identifier: MacPro5,1 Processor Name: 6-Core Intel Xeon Processor Speed: 2.66 GHz Number Of Processors: 2 Total Number Of Cores: 12 L2 Cache (per core): 256 KB L3 Cache (per processor): 12 MB Memory: 16 GB Processor Interconnect Speed: 6.4 GT/s Boot ROM Version: MP51.007F.B00 SMC Version (system): 1.39f11 SMC Version (processor tray): 1.39f11
I've started having some issues with RAW files being corrupted when I open them in Lightroom.
Equipment
Canon 7D, 1 32GB CF card, 1 4GB CF card
Lenovo Laptop, Win 8; Lightroom 4
Dell PC, Win7, Lightroom 5
Here's what the corruption looks like in my Library view. Note that all of the photos are the same. I just rapid-fired a bunch of shots down the hallway to test this out.
I first noticed the corruption on the PC, pulling photos from the 32GB card. I bought a new hard drive (SSD hybrid), installed a clean version of Windows 7, and upgraded to Lightroom 5, then the 5.3 update. I re-downloaded some photos from the 32GB card, and they still show up corrupted. So here is my further testing:
I shot a series of photos like shown above on the 32GB card, downloaded them on the laptop with a new USB cable. The photos look good.I shot a series of photos on the 4GB card, downloaded them to the laptop with the same cord, they look good.I imported the same photos photos from the 4GB card and from the 32GB card on the PC with my existing Lighrtoom Catalog and they are corrupted.I created a new Lightroom Catalog on the PC and downloaded the same photos from the 4GB card and from the 32GB card on the PC and they are corrupted.I think we can rule out corruption or issues on the hard drive, the OS, the USB cable, and both of the CF cards. It baffles me that a new HD, clean OS install, new catalog, new USB cable, and upgraded Lightroom haven't solved the problem. Is it possible that there is some other part of the hardware on my PC which is corrupting the files?
I have exported some files and reimported them into a new catalog. LR either will not let me export the.tiles- saying they are unsupported or if they do export they are damaged.
if I export the files as a new catalog they are fine.
when I check the exported files in windows explorer they have lines going through them.
I am working on my laptop Win 7 64 bit using Toschiba esata external drive.
this is not happening on my desktop just my laptop
I bought an A7R in November and I awaited 5.3 to support the camera, so basically I have both the software and camera new.However, on certain photos on import the files become corrupt in Lightroom with long straight horizontal lines going through the image.
Only random files, off any SD card. I have recently had a new hard drive so it can't be that plus ive used two different SD readers. I have also reinstalled Lightroom.
They open fine in PS and save down as TIFF's just fine, so I'm really at a loss now.
I think the next step is to try on my work laptop with Lightroom installed from creative cloud to see if the same files corrupt on.
When I import a pdf file the program tries to interpret the special characters as some control function. the script over write for a few characters after a dash.Do I need to have the originator save in a different format or do I have to select a special font to convert it to?
View 6 Replies View RelatedCorel has suddenly started corrupting any new files I save. I'll make a file, save it, then when I open it... It goes through the motions of opening it, but when it is done nothing opens. There is nothing there.
If I change the file to a zip file and open the riffDATA.cdr file that works, but this CAN'T be my solution. Could a virus have corrupted Corel?
I am using Civil 3D 2013
Every time I go to modify or even just save a previously created block my copy of C3D will corrupt the file. The corruption of the file is not noticeable until I go to insert the block into any other dwg. If I try to insert this modified block into any drawing it will not scale to the correct units. It does not matter if it is a dynamic block or a simple block of a square it will corrupt them all the same way. Extremely Frustrating to stay the least.
P.S. I have tried using the repair tool, re-install and a coplete uninstall and reinstall of AutoCAD C3D 2013 and no change. I also have installed Service Pack 2.
1. Workflow is in lightroom version 4.1 Photoshop CS5.5 is used when necessary as secondary workflow
2. Import works fine. "preview thumbnails" appear normal. When I CLICK on the next image it will suddenly do this ^ to the file
3. I have tried taking that EXACT file and running it through Adobe DNG converter but it comes out looking exactly like this... so it seems that lightroom is actually corrupting the file
4. I have a copy of all my raw files on another drive so I can grab those files and they do not have this problem
I have just purchased CS6 and been using it fine with my RAW files from my D700. I have just purchased a D800 and it will not open the files. The version says it is V7 which is supposed to work? I have tried using the updater and it keeps coming back with a message saying the sever is offline?
View 2 Replies View RelatedI have just installed the CS6 upgrade to Photoshop CS4 Extended, but now the software will not read the RAW files from my D800.
I have followed Adobe's instructions to check that I have the correct RAW plug-in (7.0.0.308) which I have. I have uninstalled the software and reinstalled the software without success. I do not want to convert my RAW files into DNG files, so I have ignored that step.
The 'Open in Photoshop' instruction in Lightroom 4 does not open my D800 RAW files either, although the files can be opened in Lightroom 4 OK.
Fault: Jobs do not complete but exit after second RAW file is read.
System: 2010 MacBookPro - Snow Leopard
Reproduceability: Intermittent - jobs tend to complete when Photoshop is launched but fail thereafter. Similar, inconsistent, behaviour when launched from Mini Bridge or within Photoshop
Seen elsewhere: NO! Same version of software on same OS works without fault on 2009 MacPro
Problem first observed: After switching from a D300 to a D800
Problem sources eliminated: Graphics Card
Other: Some reports of Ruler units being an issue - this was also eliminated as an issue. More system resources have been given to Photoshop in Preferences, without any measurable impact.
is there a fix to open nef files from d800 in cs6
View 2 Replies View Relatedrecently purchased cs6 and updated bridge to 7.1 but cant read nikon d800 nef files.
View 7 Replies View RelatedI just purchased and installed Photoshop CS6 (64 bit) to use with my Nikon D800. However, I can't open the .nef (raw) files but the .jpg files from the same camera will open. What do I need to do to open .nef files from the D800?
View 4 Replies View RelatedI upgraded to Photoshop CS6 from CS5.X and I can not open RAW files in Camera RAW for my Nikon D800. It functioned properly in CS5 with the latest RAW release but won't work in CS6.
View 2 Replies View RelatedFiles .NEF of Nikon D800: how can CS6 read them?
View 9 Replies View RelatedHow can I open a NEF file from NikonD800 in photoshop CS5 Windows, camera raw plug in version 6.7.0.339? same problem for CS5 MAC, camera raw plug in version 7.0.0.308?
View 4 Replies View RelatedI still cannot open RAW files shot by Nikon D800 in Photoshop, even with ACR RC 6.7 installed or even Photoshop CS 6 beta. Some seem to have succeeded by installing ACR RC 6.7.
View 8 Replies View RelatedI have Photoshop CS5 Version 12.0 (x64). Photoshop recognises Nikon D 800 Raw files BUTBridge does not. I have tried updates but my Apple Mac Pro does not recognise them
View 3 Replies View RelatedBridge CS6 always stops importing the files from my D800 via USB 3.0 after exactly 6 jpg files are transferred. In mixed nef+jpg as well as in jpg only mode. No matter if CF only or SD only or both cards are used. No problem with .nef only.To change the target directory to another SSD or HD makes no difference.
But at the same USB 3.0 ports (I tried them all), no problem whatsoever to do the transfer via Windows Explorer. So I guess it must be something with Bridge and USB3.0 and jpgs from the D800.System is a brand new W7Ultimate64 on an IvyBridge Z77 platform.
I can't open NEF files of my Nikon D800 in PS CS 5.1 even though I have installed Camera Raw 6.7.
View 1 Replies View RelatedNikon D800 NEF files will not load in the Elements 11 trial version I just downloaded and installed on my iMac.
View 8 Replies View RelatedI am having trouble opening .nef raw files from a nikon d800 in elements 9.
I have tried to update ACR to the latest version but can not tell if this has been successful
I just get the message "wrong type of file"
Can I use the full bitdepth raw files from my D800 in Elements 11?
View 5 Replies View RelatedI just shot my first batch of RAW images using the new Nikon D800. When I downloaded the images using Bridge the thumbnails in the download dialog shows the images. But after download the images are not being shown. Instead I get an icon. If I double click on an image I get a message that camera RAW doesn't recognize the file and a recommendation to update.
I have checked updates from within Bridge and from Photoshop and both tell me that everything is up to date. Photoshop tells me the camera RAW plug in is 6.6 and that is the latest shown on the Adobe download page. According the the information page 6.6 is compatible with the D800.
Tried importing files from memory card with pics taken in both JPEG and RAW. Imported JPEG's but not the RAW pics. It has accepted RAW files before. First time using Nikon D800 camera.
View 2 Replies View RelatedI just got LR 4.1 But it wont read my RAW files from my nikon D800 what can I do? (this is for mac)
View 3 Replies View Related