I need to use the clone stamp tool with the Aligned option unticked to use the same area for cloning purposes, but the tool behaves as if this option is ticked regardless of whether it is actually ticked or not i.e., in the Aligned rather than the un-Aligned fashion, moving in relation to the clone tools movements.
Has anyone else had this issue? Was it ever a known bug? Its CS2 I'm using.
Today I noticed a slightly peculiar behavior in the Clone Stamp tool when "Aligned" is deselected. Clicking twice on the image with alt or option held down causes the behavior of the tool to change and "Aligned" to become checked. So if you're not planning on using aligned, you alt/option click your mouse for the source point, decide on a different source point, alt/option click again, and suddenly you find yourself using an aligned clone stamp.
This does not happen with the Healing Brush Tool, which makes me think it's not an intentional short cut. It's also mighty irritating. I've tried it with both x64 and x32 CS6 on Windows. Happens on both. Does it also happen on Macintosh? Is there any way to switch this behavior off?
Adobe Photoshop Version: 13.0.1 (13.0.1 20120808.r.519 2012/08/08:21:00:00) x64
Operating System: Windows 7 64-bit
Version: 6.1 Service Pack 1
I am using Photoshop CS3 and have a problem while using the clone stamp. I mostly use the clone stamp with the aligned option de-selected, however Photoshop keeps turning the option back on after a short period of time as I am working. Is there a way to prevent this?
View 1 Replies View RelatedCould not use the clone stamp tool because the area to clone has not been defined (option-click to define a source point). this is what shows up in the command box when ever I click to start to pick the spot i want to use as the clone. makes my cloning tool useless. I have reset the tools restrted my computer.
View 1 Replies View RelatedHow do I change from clone pattern to clone stamp
View 1 Replies View RelatedRunning 5.5 I double clicked on the rubber stamp tool & cleared the aligned box in the rubber stamp options palette. Then I alt clicked in the image. Then I clicked & dragged in another part of the image. The cross cursor at the source point moved as if the aligned box was still checked. How do I get the rubber stamp to work in the non-aligned mode?
View 1 Replies View RelatedHow do i use the clone stamp?
View 3 Replies View RelatedI installed the new version of PS right now but when I start with CLONE STAMP saw something unusual! I disabled the "Show Overlay" feature, when I press ALT and make a Copy from one place and when I want to paste it in another place sometimes it confused and past unusual, specialy sometimes is paste out of brush area, The settings of the tool is the same as PS CS6 and when I switch to CS6 I have no problem same as before.
View 4 Replies View Relatedtry to clone stamps girl on the lefts bikini straps so it looks like shes topless.
View 1 Replies View RelatedThe Clone Stamp no longer works right. It's slow and sampling results are all over the place. It will sample from areas I never even ALT clicked on. And it can't keep up with rapid sampling and stamping. As is, Photoshop CC is totally unusable for photo retouching work.
I switched back to CS6, which still works fine, so the problem is NOT on my end. Running Windows 7 64bit. Photoshop CC 64bit.
Is there a mode that allows the clone stamp to, in a sense clone itself? So if the target goes over an area that you just brushed with the clone stamp it will actually begin to clone from that, instead of the document state prior to cloning?
View 2 Replies View RelatedEach time i try to use my actions is says"could not use the clone stamp because the area to clone has not been defined (option-click to define a source point)" or "unable to do.
View 5 Replies View RelatedI have seen somewhere a way to rotate the clone stamp eye so that you can line up clones around curves etc,
View 5 Replies View Relatedhow to turn off the mirroring aspect of the clone stamp in CS4 & return it to the way it worked in CS3 without magnifying & showing unfamiliar content?
View 8 Replies View RelatedI'm working on photoshop 7, and I scanned a pic in grayscale. I try to clean up some scratches with the clone stamp, but it doesn't work. Then I try to use some brushes to draw or try the eraser with many diferent sizes and it doesn't work either. I tried later with photoshop cs, but the same happens...
View 2 Replies View RelatedI am doing some photo retouching and have the original photo on the background layer. Now I have never been able to get my clone stamp to work when I add a "new layer" and try working on that layer. It will work on the original background image, where there are definitely pixels. But the new layer sitting on top of the background layer is transparent, and my clone stamp won't do anything
But I want to be able to retouch on the new layer without affecting the original background layer. So I'm watching this Quicktime movie by J. Kost on Advanced Photoshop Portrait Retouching (I bought the entire set from her at Fotofusion) and I am watching her do this!!! But I can't! She is retouching a portrait with the clone stamp....the transparent layer 1 is active above the background layer (ie it's highlighted) and the paintbrush well is indicating that the transparent layer 1 is what is being worked on.
I checked my opacity for this layer...it's 100%. I am working in 8bit RGB mode. PS 6.01. Blending mode is normal....
Do any photoshop gurus have any idea about what I am doing wrong? As a beginner (I have only seriously been studying photoshop for about 2 years...and I know it takes a long time), this problem has been confusing me...and not just with the clone stamp but also with the other brushes, and thus knowing when I can work on a seemingly transparent layer versus one with pixels.
I am having a problem with PS CS4 when I go to use the clone stamp tool I get an error message stating "could not use clone stamp because of a clone stamp error" I searched around but only found topics relating to cs3. I am using a Gateway gt series with Vista home premium Nvidia GEforce 8500 video card and 4 gb ram.
View 5 Replies View Relatedstep 3 i have to use the clone stamp tool. But when i press ALT, my cursor changes to a double arrow! A white arrow and a black arrow, and the black arrow overlaps the white arrow for 80%. I guess thats not right, i should get a circle with a + in the middle of the circle right?
When i press alt and click mouse button, nothing happends. When i do that, and click somewhere at the image, i get the error that no area has been defined.
i am having issues with my clone stamp. it just does NOT work! i alt-click to assign the area and then click where i want it to cover, and NOTHING happens. I use CS at work and v6.0 at home. v6 works fine and, at work, CS doesnt work.
View 6 Replies View RelatedWhen trying to use the clone stamp, I get a message that syas the area to be cloned has not been defined-click to define a source point. Everything I have tried does not work. What do I have to do to use the clone stamp????
View 5 Replies View RelatedI've been aligning layers in Photoshop since the first day I aligned layers in Photoshop but I still can't figure out what logic is used to determine which layer(s) moves when multiple selected layers are aligned using one of the six alignment options.
View 1 Replies View RelatedI try using the clone stamp but selection fails with this error message:Could not use the clone stamp because the area to clone has not been defined (Alt-click to define source point).
When I press Alt, I see the characteristic selection bullseye. But, afterwards, a right-click of the mouse reveals an open circle and the error message.I note that the key works for menu selections (e.g., Alt-File) and other actions.I have closed PS and re-opened. Reset the clone stamp tool, closed and reopened, etc., to no avail.
having problems with photoshop 5.5... new issue for me, as there weren't any issues yesterday. both the 'healing brush tool' and the 'clone stamp tool' are giving problems. when i press the alt key to collect an area to sample, on my screen it looks as tho the hand tool engages, and there is a second (copy looking) image moving around my screen over the original. i've already tried the 'tool reset all' function and rebooted... still haveing the same issue.
View 5 Replies View RelatedI am using PS 5.1. The cloning stamp tool has never worked.
If I alt/opt and click to attempt to select my source for cloning it does nothing. There are no presets on the cloning stamps and all settings are at zero.
I am running a MAC OS X recently updated system. I use a MS compatible wireless key board. All other PS short cuts works with this key board and always have I just have to use the PC short cuts. The only item changed in preferences for CS 5.1 is the way my mouse is display with crosshairs.
If I have two layer and I want to use "Clone stamp tool" to clone from layer one to layer two ?
View 5 Replies View RelatedMy sister wants to do a stop motion and she would like to remove a stone on every picture.
I tried to make a script, but when I apply it it doesn't change anything, so I wanted to know if it is possible to use the clone stamp with scripts, and if yes, how ?
I am trying to use the clone stamp tool, however each time I alt click on a PC runing system 7- 64 bit and try to clone an area, I get a window stating that I have not defined an area. Alt clicking again does not solve the problem. I work in a computer lab and this option works fine on our Macs using option click in PS CS6.
View 2 Replies View RelatedIs there any alternative to Clone Stamp tool's Alt-click? I am currently teaching an introductory photoshop course for disabled persons and one of my students has a condition that prohibits him from using the mouse and the keyboard at the same time. Is there perhaps some way to customize this command?
View 2 Replies View RelatedWhen I try to clone in versions beyond PS3 the clone stamp is not transparent. I can't see what's underneath, it got fuzzy pixels. How can I set this to behave the way it used to.
View 3 Replies View RelatedUsing the clone stamp tool, when I sample an area to clone, it would follow in the same direction as where my cursor is.
Is it possible to have the sampled area move in the opposite direction? I am fixing a portrait and I need to clone the other symmetrical side.
The clone stamp doesn't work. If it does work the cursor shows up as a dot, not the full size of the brush.
View 7 Replies View Related