I have CS4 installed on my "regular" system. Works fine. Yesterday I installed it on the laptop and I'm having a bizarre problem.
I've also got CS3 installed on the laptop, so the CS4 install was done as an upgrade. Went fine with no problems. I can open CS4, set up palettes and workspaces, open files and edit normally.
BUT, when I attempt to open preferences - SPECIFICALLY either General or Performance, I get an unhandled exception and CS4 crashes. The event log says its an Event ID: 1002, Source: Application Hang. The text is
Hanging application Photoshop.exe version 11.0.0.0 hang module hungapp. version 0.0.0.0. hang address 0x00000000.
I can open preferences on any other preference set, but if I attempt to navigate to either the General or Performance set it crashes.
YES, I HAVE STARTED CS4 REPEATEDLY WITH CTRL/ALT/SHIFT PRESSED TO CLEAR THE PREFERENCES.
I don't want to uninstall CS3 yet because I have to teach a seminar Thursday and if I can't get CS4 fully functional I'm going to have to use CS3. Is there something else I need to change/delete/?
I have been using AutoCAD 2013 for 2 days now, and already the new version seams so unstable! lots of errors every where!
sometimes the file gets stuck, and while you draw the file looks empty, yet when you restart autocad, you see everything you didnt see drawn.
yet this doesnt appear all the time, but the error I will be discussing does:
Try enter CUI and set the Quickcalculator pallet to appear on the right or left side of the screen. Close the CUI, and everything is going fine, and the pallet appears normal. Yet close Autocad and start it again, and an error will appear on start it says this:
"Unhandled exception has occurred in a component in your application. If you click Continue, the application will ignore this error and attempt to continue. Width and Height must be non-negative."
and the Quickcalculator pallet will appear floating in the middle.
I tried everything, but no use. The same error over and over again. This didnt happen in older versions and no big changes happned to the CUI interface, which makes me conclude its a bug.
I am experiencing the error mentioned in the subject regularly. After a random number of times (occasionally the first time, mostly it requires several attempts), a click on the open icon in a toolbar, or an attempt to open a file from the file menu, will result in the program immediately crashing.
I've tried searching via Google, and within these forums, and haven't found an exact match for the message I'm getting. I've seen that e06d7363 can be thrown due to incompatible .dll files within the Microsoft Visual C++ Redistributable package, but those sites indicated a location other than 75fab9bc. Some sites mentioned the file history being a problem, so I've disabled that within AutoCAD. Still no luck. I then deleted the associated history registry key, and the problem still continues. I restored the reg key, and...here I am, posting to the forum.
I am using AutoCAD 2007 LT with Windows 7 Enterprise, 64 bit, on a HP i7 laptop with 8 GB of memory (not sure of the exact model, it's a work computer). The Microsoft Visual C++ x64 Redistributable version on my machine is 10.0.30319.
today i had the third crash of Acad 2013 since i have installed it on my pc (I7-2600k 64 bit, 16g ram 250gb ssd /2gb hard drive, nvidia quadro 4000 graphics card) and whenever i try a and start Acad it comes up with "fatal error unhandled exception etc etc) after searching the web all i could do was reset to autocad defaults from the start menu but in turn i lost all my settings menus etc. is it my PC or software?
I am a tech at a University and am working the new deployment image for our Architecture Design lab. I just installed AutoCAD 2013 and I get this error when opening Civil 3D.
Message Box
Title: Execption in c:program filesautodesksutocad civil 3d 2013aeccuipressurepip...
Body: Unhandled Exception C06d7E (Delayload "Fdo.dll" Module Not Found) at address FD90CACdh
I have tried reinstalling and copying fdo.dll and aeccuipressurepipes.arx from the install files to installed location and still get this error.
System specs: Dell Precision T3500 Operating System: MS Windows 7 Professional 64-bit SP1 CPU: Intel Xeon W3530 @ 2.80GHz RAM: 6.00 GB Triple-Channel DDR3 Graphics: ATI FirePro V7800 (FireGL) (Dell)
I have 5 AutoCAD 2013 users that receive Unhandled Exception 2 errors when closing AutoCAD files. All users are on Windows 7 64-bit machines, but amount of RAM varies. Three machines have 4GB of RAM, one has 8GB and one has 12GB. AutoCAD is 2013, SP1.1 64-bit. All machines are Dells either Optiplex 980 with Nvidia GEForce GT330 card or Optiples 990 with AMD Radeon HD 660Series video card.
We have updated the video drivers on both machine types to the latest version. The users state that the errors occur on newly created files as well as files that they share between themselves, but only occurs when closing files. AutoCAD opens with out errors.
I've attached a Word document with the series of errors that are created when closing a drawing.
I have a problem with my Inventor crashing everytime i try to set a .iam view in my blueprint to hidden lines. First i tried to make a specific part of the .iam hidden lines and it crashed, then i tried to make the hole view hidden and it still crashes.
"unhandled exception"Autodesk Inventor Professional 2011
I just installed an educational version of Autocad 2014 for school and am encountering some major problems. The program works fine at first, but after I close it and reopen the application it starts to bug out. If I try to ask my layers after I reopen the program, Unhandled exception has occurred in a component in your application.
If I close the program and try to reopen, the opening screen gives me the same error message. I've installed and reinstalled the programs multiple times over the server, but still no difference.
My client facing this fatal error when i open my AutoCAD LT 2010 "fatal error: Unhandled e0434f4dh Exception at 7c812afbh" Even i do clean uninstall & reinstall back the software.
Is there anyway to resolve or recover this error? Because base on my previous experience it is difficult to solve the problem when the application shown "fatal error" .
I have AutoCad Map 3d 2010 loaded on a computer and whenever I open ACAD, I get the Fata Error listed above. I have uninstalled reinstalled and still the same thing.
Windows 7 64bit running Civil 3D 2013 with service pack 2 installed.
The system runs fine while on the network, but once the user takes it off the network and home or basically off the network it comes up with a FATAL ERROR when the program is started up.
Error is:
Could not load file or assembly MapPublishlmp.dll or one of its dependencies. The network path was not found.
I can ignore the error screen and "work" in C3D fine; just as long as i don't hit the <Continue> button or "X" in upper right hand corner. If either is selected the program bombs out and generates error report.
Have tried to create a shortcut with new profile, but it did NOT work either.
Like i mentioned - systems works find on network but once it is not connected to the network some issue is happening with the dll file for the mappublishlmp.dll
What ever the hell that is...Not doing ANY GIS work with system. NEVER published ANY drawings where this would have come into the mix.
We have a computer here that won't open drawings. This is the error he gets: FATAL ERROR: Unhandled e0434352h Exception at fcc8940dh. If anybody else tries to open these drawings they open fine. We have tried to open it with Civil 3d 2013 and 2014 but it happens with both programs. We have tried to recover and run audits but it still has problems.
When I open my particular file and begin working AutoCad crashes. Then posts this " fatal error: unhandled e06d7363h Exception at fe07cacdh" then does "Autocad cannot continue. You can attempt to save changes into the following file up to the start of the last command: ....."
Every time I try to open my baloon notification settings AutoCAd 2013 Architecture crashes and gives me this error: Fatal Error: Unhandled e0434352h Exception at fd51940dh. I find this particularly odd because I changed my settings once on this machine not too long ago but it's not working now. I'm going to:
When using AutoCAD Architecture 2014, I get this error intermittently when launching AutoCAD Architecture 2014. I have submitted numerous error reports, and have done research into getting this error taken care of, but nothing that I have tried has worked.
We have a 32-bit machine that continues to receive the above mentioned error message. This seems to happen unexpectedly and closes AutoCAD with no warning. It has been happening with more frequency lately. What causes this error and what steps may be taken to remedy it?
