Photoshop :: 13.02 Update Changes Smart Object
Dec 19, 2012
Since updating to the 13.02 release of photoshop CS6 extended I have noticed the following modified behavior:
Â
When changing the assigned profile of an image containing smart objects, where the smart objects have previously gone through a color profile conversion - the smart objects will get reconverted to the newly assigned profile.
Â
This was certainly not the behavior of 13.01 and previous versions.
Â
Is this an intentional change? If it is shouldn't it be noted in the release notes?
Â
System info: mac os x 10.6.8
View 3 Replies
ADVERTISEMENT
Nov 27, 2013
Working in the CC3D features, I am constantly making changes to my bump map. Every time I step-backwards, or make a significant change to the bump texture (smart object?), CC auto-saves the layer. This specific file is a very very large document (3 gigs in the bump texture layer alone), and the 3D layer has lots of lights and is very complex.
This auto-refresh/update really bogs down the time that it would take me to make my changes. I have a very fast machine (I know it's fast, I dont need to list my specs), and I have all shadows disabled.
Â
How do I disable linked smart-object auto-update/refresh?
View 3 Replies
View Related
Mar 28, 2012
Using Photoshop CS5 - after scaling a smart object do I need to remake it as a smart object again?
View 3 Replies
View Related
Aug 23, 2013
1. Is there a way for masking each smart filter separately on a single smart object other than nesting one smart object into the another?
2. Is there a way for removing the previously created smart object?
I mean ... let's say I have a smart object containing four layers. Can I remove smart object from these layers?
View 2 Replies
View Related
Aug 9, 2012
Why doesnt the smart filter mask move with the smart object?
View 14 Replies
View Related
May 12, 2009
I'm running photoshop cs3. I created two different smart objects. Within each of those smart objects, I want to include another smart object. However, when I update the embedded smart object, only the partent SO is updated, the other SO seems to have a different child. here is the setup visually: canvas -> SO1 -> SO3canvas -> SO2 -> SO3 so when I update SO3 from within SO1, only SO1 is updated - SO2 stays the same.
View 9 Replies
View Related
Aug 9, 2012
Ps CS6
OSX 10.6.8
Â
Problem: Transform applied to Smart Object fails to transform an attached Smart Filters Mask.
Â
I mean a Transform, including Free Transform, as found in the Edit menu. A simple move by the Move Tool is OK.
Â
A workaround until this bug is squashed is to encapsulate the Smart Object + Smart Filters + Filter Mask inside another Smart Object and transform that.However, that will not be a satisfactory solution in some cases. If a filter has size parameter(s), e.g. Gaussian Blur radius, a scaling or warping/distorting transform applied after the filter will obviously differ from the filter applied after the transform.
Â
In any case, the workaround is inconvenient to subsequent editing and experimenting with filters and masks.
View 3 Replies
View Related
Nov 1, 2012
Yesterday I was using Photoshop CS5 and RAW 6.4 (?) in a Windows environment. When editing photographs, I generally open the photo in Camera Raw, make development changes (ie exposure, contrast, etc) and then open the developed image as Smart Object in Photoshop. I then clone, add layers, masks, etc. and then save the final image as a tiff.
Â
Yesterday, I upgraded to Photoshop CS6 and RAW 7.0.  Now, when I open my tiff files and Smart Objects in the RAW editor, my exposure, contrast, and black settings are missing (reset to zero). My graduated filter settings are also missing. It seems to me that the embedded sidecar data in the tiff / Smart Object is not being read correctly.
Â
How can I update my old tiff / Smart Objects? Re-developing thousands of photos is impractical.
Â
NOTE:Â As a side note, I opened a RAW file with xmp data (not stored as a tiff/Smart Object) and had no problems.
View 1 Replies
View Related
Mar 22, 2013
I have a stack of screenshots to maintain, where what changes most often is the release information: so, I've made a separate .psd with the header and used File > Place to add it as a smart object. What I'm not having any luck with, is changing that single .psd file and seeing the update ripple through to all the screenshots.
View 2 Replies
View Related
Feb 20, 2013
I render 3d object from raster and smart object (extrusion) Each time i do the edge where the extrusion meets the front inflation material is slightly distorted. Should be a smooth line.
View 20 Replies
View Related
Jul 21, 2012
I originally want to create some text and add effects to it. But as I add effects or, especially, scale, it, I find I need to go back and change the text image (make lines of the characters wider, change proportions...etc.
Â
So I imported my text as a smart image and began work on it -- but when I went and change the original, the changes were not reflected -- I closed the document I was working on and re-opened it, just to be sure -- maybe it didn't detect the file had been changed. No difference.
Â
It seems it makes a separate copy from my original and uses that and the only way to update it, is to delete an old imported smart layer, and add in a new one and re-apply all the layer effects to the new layer (or transfer them from the old later before deleting it).
Â
Seems a bit awkward...Shouldn't the smart image allow me to include something externally, and as it is imported, it imports a bit map of the current content sized to the appropriate "frame" for the imported layer?
Â
That's another issue -- can't just copy layer effects -- have to be sure to reapply any cropping or resizing you did to the smart image (presuming the layer can take a zoom level and a mask -- maybe it can't do that either?)...since you can distort it, I would assume so (remember reading that layer effects applied to smart objects were turned off while you distorted layers, or something like that...)...
Â
How does one include dynamic content in a picture at edit time (NOT AT DISPLAY TIME -- this ain't HTML! ;
View 9 Replies
View Related
Jul 28, 2013
A file with smart objects. Whe I double click on the icon of the smart object a new filke opens with te content of the smat object.
Â
After editing I choose to close and CC asks if I want to save the file.This is exactly like CS6 does but now in CC I am aked for a place on disk to save and the content of the original file is not updated.Is this normal behaviour or am I missing something?
View 2 Replies
View Related
Dec 14, 2013
Resizing objects is a mess in CorelDRAW X6 when objects are outlined with Scale With Object enabled to retain proportions after resizing.
None of the tools dealing with outlines (e.g. Contour or even Outline itself) continue to work properly after resizing the object.
I strongly suggest to recalculate outline property values after resizing if Scale With Object is checked. Don't just do it hidden somewhere internally in the object model by applying a temporary scaling factor. Instead actually recalculate the actual property values if Scale With Object is checked.
CorelDRAW Graphic Suite X6.4Â @Â Windows 7/Windows 8 - 64 Bit, Windows Server 2008 R2, Windows Server 2012
View 9 Replies
View Related
Jul 30, 2013
It's my understanding that a change made to a disconnected smart preview will automatically update the main database when connected to the drive containing the photo and database. Mine doesn't seem to work automatically. After reconnecting i have to save the metadata for the changed files on the version of Lightroom with the samrt previews and then read the metadata on the primary version of Lightroom. Do both versions of Lightroom need smart previews installed? Should I use a certain procedure of which i'm not aware? I have an iMac for my main computer and a Mac Book Pro for the remote computer.
View 10 Replies
View Related
May 2, 2005
i noticed importing an image file from adobe illustrator into photoshop through copy and paste. but i dont have illustrator on my pc. is there a way to turn a layer or an image into a smart object without using the bridge feature they have now in CS2?
i just want to make an image into a smart object.
View 3 Replies
View Related
May 19, 2009
in cs2, i use smart object lot to replace image i mean i have to make collection of gallery of let's say mp3 albums so i have to put albums covers in my designs but exactly as i wanted in size {no matter whatever size/resolution the source (album cover) are} so smart objects always be the easiest way cos i firstly draw rectangulers in my custum size, and i covert each rectangulers to smart objects and replace every smart objects to place those albums covers. it's easiest way and since cs3 is launched, when i try to replace image of smart objects my replaced image(album cover) wont be as equal as my custum rectanguler size. this is my prob. when i place the images either they are placed bigger size than the size of smart object or smaller than smart object . can is there any process to make as shame size as smart object while placing images to smart object??? in cs2 it's possible but cs3 cs4 can't do such smart object or i'm a missing any new technique to do that? ya we can resize each placed covers to our custom size but it takes hell long time . i need shortcut way. wel in cs2 i been doin things like this using smart object which takes only 2 min to put images in my custom sized rectangular
View 7 Replies
View Related
Apr 20, 2012
I am trying to open a RAW photo in Photoshop CS5 as a Smart Object. I have the photo selected in Bridge. When I go to execute File>Place in Bridge CS5 the menu entry indicates there should be a menu displayed. However, clicking on Place does not bring up a menu.Â
Â
In Photoshop there is open a blank file to receive the photo.Why do I not receive a menu?
View 9 Replies
View Related
Apr 3, 2013
I'm having aliasing issue with my smart objects in CS6 I never had before. I've searched all over PS and these forums to try and figure out how to get rid of the jaggies, with no luck. Below is a screenshot example of a SO with the aliasing (I'm trying to reconstruct a dresser top).
View 5 Replies
View Related
Sep 15, 2013
I have a smart object, and, If I apply Control "J" Â Â Or Drag It to the New Layer Icon, It will Duplicate the Layer.And If I Go to Layer-Smart Objects- New Object Via Copy, It dose the same thing.What Is the Different between Control J, or Go to Layer- Smart Objects- New Smart Object Via Copy.
View 2 Replies
View Related
Dec 20, 2012
Often after making vectro pictures in illustrator i use exporting to Photoshop like a SO. But i can't realize, why after exporting some elements like a blur or transparent mask is losing?
View 2 Replies
View Related
Nov 19, 2012
I working on the Photoshop with Smart Object with link to Illustrator. How can i transform perspective for Smart Object in Photoshop? There are accessible to me only Scale Rotate and Skew, others is gray out.
View 3 Replies
View Related
Jan 14, 2013
The transform tools work once, then I have to quit and reopen for it to work the next time I place a smart object.
View 2 Replies
View Related
Jun 25, 2013
I was playing around with some images that I changed into Smart Object, and I noticed when you shrink the Images to a very small size, and later Transform It back to a bigger size, the quality dose not change,,Even when I saved them and opened them later on. But It dose not work with saving the Smart Object into JPG.
View 1 Replies
View Related
Jan 15, 2013
Is there a way to get Smart Objects to work on a different disc besides your Startup on a Mac? I'd like to set up a stand-alone SSD to handle all Smart Object operations. Currently, I'm getting the "Start-up disc is almost full" warning a little too often. It even crashed PS one time. I know you can change the Scratch Disc very easily, but I don't see any way to change how Smart Objects are handled.
View 16 Replies
View Related
Feb 28, 2012
I have a 'base' file A, with two (different) smart objects B and C. Now I want B and C to both contain a third smart object D, and I can't get that to work.
I can place the same file as a smart object in B and C, but it becomes two different smart objects, which are seperately editable. I would like to be able to edit smart object D and the changes to be visible in both B and C and in turn in A.
Â
Is this at all possible? Btw working in photoshop CS5
View 10 Replies
View Related
Sep 19, 2013
I was told to double click the layers window and a new editable window would pop up...but only the FX window pops up. I've also tried the "edit Content" choice but that erases the smart object..
View 4 Replies
View Related
Aug 3, 2012
I need a smart object mask, I converted the layer to a smart object, using the mask panel to add a mask, I'm not getting a smart object mask instead a regular layer mask. I searched the adobe documentation.
View 5 Replies
View Related
Jul 31, 2013
I have two tabs open: the first one the "parent file" and the second one the "smart object" from a layer of the "parent file". I accidentally "unsmart" the object on the "parent file" and close both tabs...
Â
Question: Is there a way to recover a closed smart object in photoshop? In photoshop directory?
View 3 Replies
View Related
Jun 15, 2013
I'm currently working on a mock up for a product design, a box container to be precise,And I want one smart object layer to cover both the front and the side, so you can seamlessly design the front and side of the box.
Sadly I haven't found a good way to do this, thought i would be able to with warp but I can't get straight corners with it,
View 1 Replies
View Related
Sep 20, 2013
When i have a project that contain a lot of the same images i normally create one Smart Object and copy/paste it as many times as i need to. This way when i have to change something i can edit the Smart Object and it will automaticly change all duplicates.
Â
For example i have created a button and i need one that has to be a different width, i can change thewidth of the Smart Object. Only this way it changes all the duplicates too. Let's say i don't want to change my previously made duplicates, i can make a copy of my Smart Object this way it does not effect my previously created buttons. This have the effect that when i need to make some changes, ill need to edit 2 buttons instead of one.
In some of my projects i have 10 different sizes of the same object only the design is left unchanged. When i need to change the color for example i have to edit this 10 imes. You would say 10 times isn't that much. That is correct. But if you made multiple changes to the Smart Object's layers, let's say i changed 4 things. I have to manually change 4 x 10 = 40 things. That could take up some time.
Â
In my case i need to have different widths of the same object everything else needs to be exactly the same. So in my perfect case i would have one smart object with different widths which i only have to change once's.
Â
Is there a way to accomplish this?
View 5 Replies
View Related
May 30, 2013
SUDDENLY nothing happens with smart object. The history adds a state,"edit contents", but ACR window never opens and now I'm screwed cuz this document has 13 SO's waiting for work. This has happened plenty in the past.
Â
PS CCÂ
ACR 8.1...
OSX.8.3
View 7 Replies
View Related