What I want to be able to do is click on an area of a photo, and then tell paint.net that I want this to be WHITE - and adjust the rest of the photo accordingly. ie, an object photographed on a white background that is tinted due to incandescent lighting etc.
I know this feature exists in photoshop elements. Is it available in paint.net?
how do i get the drop down box in white balance to allow me to change the white balance
View 1 Replies View RelatedI use a Pentax K-r and the white balance icon above the EXIF data panel only shows if I have used Auto White Balance. If I have used any of the other modes available in the camera, no icon is shown and the EXIF data lists the shot as taken with manual white balance. The other two icons (metering mode and JPG/DNG) work correctly. The white balance issue means that I have to note the white balance setting of each shot while the card is in the camera and put it by hand against the shot in PaintShop Pro. This is very time-consuming and seems to be a serious omission.
I have since found that the white balance icon works with my Panasonic Lumix DMC FZ-150 camera, although the EXIF data still shows the shots as taken with manual white balance, so it seems to be a compatibility problem that needs to be resolved.
How best to use the white balance plug in when editing photos?
View 1 Replies View RelatedWhite balance. Shooting With my Canon 5D, shooting RAW, I choose Auto White balance. At the end I shoot a Gray-Card with the same Lighting that I had. Later I open the image with the Gray-Card inside the camera raw, and I select it with the white balance tool. then I get the perfect White Balance. I personally like the Gray-Card which has from very light gray to very dark gray. I'm still using Photoshop CS5. Now there are many products out there such as Color Checker. How I can get better color Balance or Color Correction using those 3rd party products. Also My Monitor is calibrated using Data Color spydare 3Elite.
View 3 Replies View RelatedIs there a way to quickly white balance pictures in photoshop? I know with other products you can click on something that is white or gray in the photo and it will automatically white balance the photo.
View 1 Replies View RelatedSet the white balance
View 4 Replies View RelatedI have read several article on the ability to us a gray card in a photo and then adjusting the white balance in Camera Raw or CSII. How do you achieve this?
View 1 Replies View RelatedI shot some photos (jpg's) outdoors with the white balance set on tungsten. I have access to PS CS and can navigate it pretty easily, but have little photographic experience and don't have a particularly good eye for color adjustments.
View 2 Replies View RelatedI would like to know how the white balance is calculated on GIMP.
View 3 Replies View RelatedI have some jpg files with a wrong white balance.Flash refused by taking the picture.How can i correct this in GIMP?
View 4 Replies View RelatedI'm new to Lightroom so bear with me. My problem lies in the import process: each time I import, a yellow tint (tungsten WB) is added to each photo, as if the white balance is being changed. I know that thumbnails are created in camera, but the photos look fine when Lightroom is "loading" them on the library screen, it is only when the "loading" message goes away that they look too yellow. I don't want to apply an import preset because I fear that each photo's problem is unique. When I use quicklook in finder, the images look fine. When I export as a jpeg from LR, the problem persists. Here's what I'm using:
Camera: Canon T2i (Color Space: sRGB)
Lightroom: Version 4.0
Computer: Macbook Pro, Snow Leopard
I've read that this could be caused by a corrupt color profile, but I'm not sure how to change this on a Mac and if it's appropriate to apply sRGB as a monitor profile.
I just bought a new computer and i have been running LR5 on a Lenovo b540 aio pc. i had no issues on this machine other than slow processing and lag due to insufficient memory and processor. my new machine is a standard desktop with a seperate monitor. when i installed LR5.3 and import files, they turn out to be a very "manilla envelope" color but not until after importing them. i dont understand why this is happening. it is probably something very simple that i am overlooking.
View 2 Replies View Relatedusing the White Balance Tool in Camera RAW.I have sometimes heard that I need to select a naturally white point (as opposed to a specular / highlight point); but I have also heard that I need to select a neutral gray point.
View 2 Replies View RelatedMy preferred medium for photography is underwater, so it is crucial the white balance is set to the area and depth of the shot. When I use Photoshop CS3 to develop the shot in RAW, as soon as I click on to the shot in bridge it instantly reverts back to the default white balance, In UK fresh waters this usually means a strong green cast.
View 4 Replies View RelatedI lost the white balance presets.
all that shows in the menu is
As Shot
Auto
Custom
Everything else is gone. not tungsten, no flash, nothing.
How do I get these back?
I have a photo i am enhancing in which my point of focus at center (an arch structure) is being colored by artificial holiday lighting and there are sodium-vapor street lamps surrounding it on adjacent streets with the foreground dark asphalt and objects (I used a wide angle) having a yellowish hue. I want to know what is the best way to localize the center arch, leave that with it's own adjustment (of 5600K) and bring down the rest of the image with the yellow-orange tinge down to 2500-3200K (or otherwise have them look like nice xenon or white fluorescent lamps) with good blending (so the intersection of both lighting does not look stilted) and while keeping the same tonal range. Global adjustments are just not doing it for me here. Layers and blending? Gradients? What would you recommend? Please post anything that also relates to adjusting for conflicting lighting locally and any limits on this.
View 1 Replies View RelatedI am still baffled with matching the color - tint .
If I copy paste something on another image . I get crude red -green-blue + - world adjustments . I sample the color numbers to match still no luck . The saturation / Hue adjustments are semi helpful .
I end up with a flat gray bluish skin tone , Is their a color temp lighting corrector , talking from my kodak paper-photo printing 70s flashback years.
click path to fine tint / color correction for skin tones?
on my LR 3. IT used to be right under "Histogram" and above "Tone Balance" in Deveolop and now it is simply gone! I dont know if it was because of software updates or ?
View 4 Replies View RelatedLR3.4.I have a whole selection of photos that were taken at an event where there was 2 types of lighting, so the people in the back of the shots have a warm orangey glow and the people at the front have the day light. What would be ideal option to adjust the white balance on 2 separate areas, but I can't seem to find this in Lightroom? is it possible or will I need to export 2 versions and merge in photoshop etc?
View 2 Replies View RelatedIs it possible to change a setting or preference in Lightroom so that the white balance selector tool will give a 0-255 value reading, instead of a 0-99 value? Having that option would allow users to better correlate their readings with what will show up once the images is analyzed with Photoshop's eyedropper tools and info window.
View 4 Replies View RelatedI'm basically trying to match the colour of the single jar shot to that of the jars in the colour reference file (the one with loads of jars), so it looks as if the single shot could be a closeup from the group shoot.
There's a batch of these single jar shots so I was looking for an adjustment I could do once and then apply uniformly to the rest.
My attempt was to create a series of adjustment layers that worked for one image and then apply that to the rest, but I couldn't come up with the correct combination of adjustments that matched the reference.
I'm confident with doing colour adjustments on the items inside the jar so you needn't worry about that, it's more the overall white balance / slight lessening of shadow underneath the shelves / shine of the glass jars / warmth and cleanliness of the picture's tone.
The single shots will cycle through as a GIF, so it's important to look as if it's just the content of the jars changing, rather than the entire shot - hence needing a single solution that was applicable to all pictures.
I find that if I have some video that has poor color, if I grab a still from it and bring it into GIMP, GIMP does a good job on correcting it.
Now, I'd like to know what color correction settings were applied by that filter so that I can go back to my video editing package and apply similar color corrections across the entire video clip, not just the still.
Why does my white balance temperature slider have 1-100 values instead of a sliding Kelvin value?
View 2 Replies View Related*Where* do I find the "as shot" white balance for a photo I've already developed?
View 3 Replies View RelatedI just upgrade to LR 4. However in the develop module, whenever I choose my white balance tool and then hover over the image it changes to the magnifying glass. If I click, all it does is zoom in and out. The circle where the WB tool lives, is blank like it usually is when the tool is selected.
I've checked for stuck keys and still have same result.
Win 7 pro x64
After having upgraded to LR5 the syncronization of the whitebalance doesn't seem to work. All the other settings syncronize as normal, but not the whitebalance. And the WB is checked, of course...
View 5 Replies View RelatedWhen I import my raw files from my 5D mark 2 my white balance is set to 5200K, when in Lightroom it shifts to 4850K?
View 6 Replies View RelatedI'm using LR 5.2 and have seen tutorials where local white balance adjustments are possible with the graduated filter or brush tool.
With my LR these sliders are missing. I can change saturation, contrast, etc., but not the white balance. Could this not be part of the student version? The screenshot to the left shows my screen, the one to the right shows the sliders I'm looking for.
I finally figured out why LR sometimes ignores the paste command and if not a bug, it is at least a problem that can adversely affect the unsuspecting user. Pasting a WB does not always work if both the source/target are both "As Shot", and yet the Temp/Tint are still different. It seems priority should be given to the actual numbers instead of the As shot status, which (in my case) could vary between cameras. The logic is a bit strange.
I can see how whether or not this is a bug is debatable, but it seems more useful to have it work the other way. There should at least be a message when the paste command results in no expected action (I expect the actual WB numbers to take priority over "as shot").
I've noticed that LR interprets the white balance settings differently for my raw .nef files coming from my Nikon D3s and D4 bodies; even when a specific kelvin temp is chosen in camera.
Here's a few examples:
D4 flash WB, LR shows as 6150, +2
D3s flash WB, LR shows as 6400, +9
D4 WB set to 5k, LR reads as 4750, +1
D3s WB set to 5k, LR reads as 4900, +10
why this is happening, and what (if anything) I should do to get xxxx kelvin temp in camera to import as xxxx kelvin temp in LR?