When I zoom in close enough to see individual pixels, PP puts a grid of white lines over the image. Each cell of the grid contains one pixel.
How can I get rid of this grid of white lines.
See image below. I have a 4x4 grid set up and am using a 4pixel square Paint Tool. I click Snap to Grid and it's always off centre. I want these blue squares to fit inside the squares on the grid.
View 10 Replies View RelatedIs there anyway to create a default setting so that units stay in pixels. Each time I bring in a new image in Photo-Paint X6, I have to reset units back to pixels by clicking Tools, Options, Document, Ruler. It would a time saver if I could somehow make pixels a default setting.
View 1 Replies View RelatedMy problem is that when I fill something with solid colour, there are pixels shown on the screen. When I save the PCX and open it in an older version of Photo-Paint the pixels are not there.
What am I doing wrong or how could I avoid this. There are no options activated as error diffusion...
We print entrance mats and have a fix palette of 44 colours and need PCX files for the machine.
Check the screenshot: space is filled with one colour but on the lower half there are pixels/dots which should not be there...
In Photo-Paint X5, there is an option that allows you to turn off the pixel grid. It's located under Tools -> Options -> Document -> Grid -> Pixel Grid. If I uncheck the "Show pixel grid at 800% and higher zoom", then the pixel grid is turned off as expected. However, the next time I open another document, the pixel grid gets turned right back on. How do I make it so the pixel grid is always off? I've tried making it fully transparent, but the transparency resets each time I open a new image as well.
View 14 Replies View RelatedOne thing I never liked about Corel PhotoPaint X5 was that a pixel grid appeared when you zoomed in. It is possible to turn this off on a per-document basis, but not globally. Now, I see X6 still didn't fix this.
View 3 Replies View RelatedI haven't found a way to turn a color photo into a Black & White outline drawing in Corel PhotoPaint X5.
View 11 Replies View RelatedWhat format would I need to save a scanned in black and white line drawing so that I can color it in using the Fill function (like a comic book)? I used to do it with earlier versions on PhotoPaint (6 and 9) but haven't done it in a while and now cannot find the right format.
Now what happens is when I use the fill function the whole image turns to the selected color, it wont recognize the black lines as borders.
I am using Photo Paint 9 to edit photos I took of some watercolors I did. Many of the photos are of a single animal on a white background (similar to the California state flag). When I printed many of these out they had a greenish tint (not a printer problem) so I went to Image--Adjust--Color Balance.... I adjusted the cursor on the Magenta/Green bar to -15 (towards Magenta) and hit ok. The problem is, now when I print, the image is ok but the background which I want to be pure white now has a pinkish (magenta?) tint to it.
Is there any way to isolate the image and get the background pure white again?
removing a background from a photo.
For example, remove the grass from this photo:
Make it look like this:
Current System: i3 3.07ghz, 3gb ram, Windows 7 32 bit with all updates and X6
I want to know how to resize a photo without loosing quality....... in the image resize box the is a check box that says maintain file size ......what does that do .
I have tried to resize using it and the file stays the same as the original.
I am trying to change the background of a photo. Not just change the color but change the color AND make it keep it's original shading, etc. I have some family photos we had made recently and they used a beige color draping for the background. The ones we had made before had a black draping. I was wondering how I could go about using some sort of additive coloring to transform the varying shades of beige to the same varying shades of black.
I have already used the masking tool to separate the background from the rest of the photo.
I want to create bulging eyes in a photo that i have. I would do this in photo paint?
View 10 Replies View RelatedIn a photo, I cut out an elliptical or round face.I saved the cutt image as .; "New from clipboard" No problem, the background is now transparent.
But now I want to make the edges of the oval or round image transparent.(then I want to put the result image on another image)
How can I make the edges transparent with Corel Photo Paint (or Corel Draw)?
Is there an easy way to do color tints on a photo in PhotoPAINT? And by that I don't mean just correcting the tint, I mean converting a regular photo into one that has a single color tint (e.g., yellow, red, etc.). I've tried graying it out and then adding a transparent color layer over it, but I'm not getting the result I'm looking for.
Also, while I'm at it, are there any (current) books out that cover PhotoPAINT in depth? I know that the official DRAW book has a section on it, but it's pretty basic.
The current crop of photo sharing apps like Instagram have made filter effects a popular way of adding some extra vim to your shots. What if you want to give the ‘retro’ look to photos that aren’t on your phone though?
How can we create retro looking photos in PhotoPaint?
Is this possible to do in photo paint and is there any tutorials on it?
View 12 Replies View RelatedAs a service, I am setting up some photos that will be exported as png files for use in Publisher.
I need grungy photo edges to be transparent so her background shows through the grunge effect.
Thought I knew how to do this but it's not working.
I would like to use a photo frame from connect, and keep it in the Effects>Creative>Frame menu of frames. I have downloaded and clicked and dragged the frame to my image, but I would like to reuse this frame. Is it possible to add it to the menu? I can download it to the menu - but it is a temporary item in the list of views to the right, which can be replaced from any of the permanent members of the dropdown selection of frames on the left of the Frame menu. I would like a frame to become one of those "permanent frames."
View 1 Replies View RelatedHow to alter a scanned newspaper photo to get it to look like a continuous line photo using cpp apps? is there a tried technique? i tried tracing in cdgs but it looks like the dabble app was applied in cpp i want to try and get rid of the 65 line printing ink dots. if no one has a way, i will post one if i am successful. trial and error can be fun if you have the patience and fortitude.
View 11 Replies View RelatedI am making a background image for a website in Draw. The main part is Black.
I export as a jpg and the image looks fine when I view it.
Then if I open it in photo-paint the black is not black, but rather has a grey color to it. The image is exported fine and looks great when viewing it with the normal windows photo viewer program.
Something is happening when it is opened up in photo paint I think.
i'm using my corelphoto paint x3 for a year now and it is working fyn then on one occassion i don't know but while editing an image, i suddenly discovered that my effect tools, paint tools, clone tools wont work or wont make changes on the image i'm editing... i've already checked the menus and settings but still no work..i also tried reinstalling the program but still it's all the same..
View 2 Replies View RelatedIs there a Print Layout in X5 similar to that in Paint Shop Pro?
View 1 Replies View RelatedI recently had a computer virus. The hard drive was scrubbed, and we had to reinstall all our programs.
Now, on my CorelDraw X3 graphics suite, the photo paint program is only partially functional. The clone and paint tools do not work anymore. I have uninstalled and reinstalled a couple of times, rebooted the computer, but no progress. We have Windows XP, the same as before.
I'm having trouble using the paint brushes in photo paint x6. i open a JPEG or bitmap then use a paint brush to paint on the image but there is no paint. do i have to use a mask now? I tried copying a dupe for a second layer to see if that worked but nix. i still have x4 and i do it there. but what's with x6? all the other tools work but the paint brush.
View 14 Replies View RelatedI'm not sure if i can explain this properly, but I'll give it a go;
How can I change the color of a picture (jpg) so that the picture is build up in one color only.
I want the effect as shown the pictures below (assuming that the original sky was blue/white-ish)
how can I paint a rope that goes throug a ring?
My rope is always behind the ring....
My question is: How do I change the colors of the default white-and-gray grid behind pictures (the one shown when you have a transparent or blank area in your picture)? I'm asking this because I'm trying to design some glass-like icons (that use a transparent white on the edges), and due to the white areas on the grid behind the picture it's very hard to see the separate pixels. Is there possibly any way to change these colors to, say, black or something, so I can see what I'm editing better?
View 2 Replies View RelatedI want to reduce the number of pixels in a photo so I can send it as an avatar to another forum. How do I do this? Older version was easy but I can't find method in present update.
View 1 Replies View RelatedI recently bought my self a new Canon ,and I want good converters.
View 3 Replies View RelatedI need print 9 photo id's in brazilian format 3x4cm in a sheet 10x15cm whith 1,5cm border in both sides what i make a new layout? or edit a exist layout in photopaint?
I make this with the picture pack in photoshop but I need calculete manualy