AutoCAD Visual LISP / AutoLISP :: While Loop With Prompt
Nov 19, 2013
I am trying to put together a loop to enter a number greater than the previous number entered. Below is my mockup and I just cannot get it.
(defun c:22 () (while (setq d (getreal "
Specify diameter: ")) (setq $d d) (while (if (<= d $d) (progn (prompt "
Specify greater diameter.") (setq d (getreal "
Specify diameter: ")) ) ) ) (setq p1 (getpoint "
Specify point: ")) (command "CIRCLE" p1 d) ))
View 9 Replies
ADVERTISEMENT
Dec 6, 2012
I have a parent directory with x-amount of folders contained inside. I say X-amount because I would like to keep adding or deleting folders as time progresses. I want the folders contained within this parent directory do be read into a lisp variable and then be printed to the command prompt till every folder is displayed by name, then the loop may stop.
View 5 Replies
View Related
Oct 22, 2013
I am have trouble trying to figure a couple of things in the following code.
First - in the IF statement if "SD" is >= ask "Specify LAST strata number". How do I add nil?
Second - After I "Specify the LAST strata number", How do I stop the loop?
(defun C:22 () (setvar 'osmode 0) (or $S (setq $S 10)) (setq S (getdist (strcat "
Specify scale [Inches equal a Foot] <"(rtos $S 2 2)">: "))) (if (= S nil) (setq S $S)) (setq $S S) (or $BD (setq $BD 7)) (setq BD (getdist (strcat "
Specify boring depth in feet <"(rtos $BD 2 2)">: ")))
[Code] ........
View 2 Replies
View Related
Nov 13, 2012
I’m trying to put together a loop for if nil or something other than text or mtext is accidentally selected than prompt text was not selected. This is what I have so far.
text or mtext is not selected than prompt
(defun C:ww ()
(while
(not
(and
(setq esel (entsel "
[Code]......
View 7 Replies
View Related
Nov 22, 2011
I am able in lisp to create a command prompt selection menu, easy (see code below).However what I want is for the lisp to be ready to undertake an action UNLESS I select an option.
An example is the offset command wich has a function ready to roll (namely the specify offset distance) "OR" I can interrupt the "specify offset distance" and enter one of the sub options (in the case of offset Through/ Erase/Layer).
My code attempts to offset also, UNLESS the user wishes to specify a distance.
(DEFUN C:loadoffset ();CREATING MENU FOR SUB COMMANDS [GETIT] [GOTIT]...(setq choose (getstring "
Select an option... [1=GET DIST] [2=GOTDIST]: "))(if (or (equal choose "1"))(GETIT))(if (or (equal choose "2"))(GOTIT));TERMINATING SELECTION MENU...)(defun getit ( gotit )(setq MYDIST (getdist "
SELECT A DISTANCE: "))(gotit))(defun gotit ()(command "_offset" MYDIST pause pause"exit"))
View 9 Replies
View Related
Aug 17, 2011
When you use shell command and type cmd, command prompt appears and the default location is My Documents. How can i change it to another directory by using only lisp?
View 9 Replies
View Related
Apr 25, 2012
I have a little LISP I have been working on that creates a text object as a "label" for 2D ductwork our company does. It makes a field for the mlinescale as the duct width, combines with user input for duct depth, and prompts user for location to place the text. The routine is functional...however, I would like to tweak two things that I cannot figure out.
First, I would like the command to continue until the user escapes, similar to the "multiple" command in AutoCAD. I have tried adding a while loop to the majority of the routine..which works until the user escapes...then my error handler undoes everything.
Second, when asking for user input, is it possible to ask for user input without a default the first time, but thereafter remember the input as a default?
Below is the code in question...not including error handler, etc. :
(if (= ducttemp nil)(setq ducttemp 12))
(initget 6)
(setq ductdepth (getint (strcat "
Enter duct depth in inches <" (itoa ducttemp) ">, or Esc to end: ")))
(if (= ductdepth nil) (setq ductdepth ducttemp) (setq ducttemp ductdepth))
[Code] .........
View 4 Replies
View Related
Jun 18, 2013
I am just a begineer for auto lisp. I wrote my first program, but got stuck, I am unable to get out from while loop if i Press "enter".
(defun c:arsh ()
(while
(setq p1 (getpoint "
pick point :"))
(setq l 1500)
(setvar "osmode" 0)
(initget 7)
(setq p2 (polar p1 (dtr 0) l))
[code]....
View 9 Replies
View Related
May 8, 2013
I have a lisp routine that I would like to add to. Right now when running the macro the user is not prompted to "Pick Point On Line" in this example
(command "insert" blk "s" var1 pause pause))
I have added the line
(setq pt1 (entsel "Pick Point On Line "))
(command "insert" blk pt1 "s" var1 pause pause))
but the command doesn't seem to like my PT1 value
BLK and VAR1 are set in another lisp routine.
View 9 Replies
View Related
Oct 4, 2012
i am writing something that will draw consecutive lines with a rubberband to be used as a leader from a block's insertion point. this:
(WHILE
(SETQ LN (GETPOINT "
Select Next Point (ENTER to Finish) : "))
(COMMAND "LINE" (GETVAR "LASTPOINT") LN "")
)
works, but does not include the rubber band. i tried:
(WHILE
(SETQ LP (GETVAR "LASTPOINT"))
(SETQ LN (GETPOINT LP "
Select Next Point (ENTER to Finish) : "))
(COMMAND "LINE" LP LN "")
)
which includes the rubberband, but will not exit the loop. The last break source in VLIDE shows that
(GETPOINT LP "
Select Next Point (ENTER to Finish) : ") is casuing an error. Placing
(SETQ LP (GETVAR "LASTPOINT"))
outside the loop causes all lines to be drawn from the same point rather than the endpoint of the previous line.
View 9 Replies
View Related
Nov 3, 2011
I'm running the following string in a routing that is looping so I get dozens of these prompts. How to supress these? Or, do i have to use to entmake?
(begin loop...
(command ".-Mtext" CSW-Tpoint "W" 0.0 (vl-filename-base (vla-get-imagefile image)) "")
);end loop
Prints to the command line..
Current text style: "Standard" Text height: 0.0833 Annotative: No
Current text style: "Standard" Text height: 0.0833 Annotative: No
Current text style: "Standard" Text height: 0.0833 Annotative: No
Current text style: "Standard" Text height: 0.0833 Annotative: No
View 3 Replies
View Related
Jun 13, 2013
I am looking for a way to extract (filter) all polylines, and loop a lisp based on the number that are found within a "W" selection window.I am frustrated getting "malformed list" or errors, even after defining "n" for repeat.The code I have so far looks like this:
(defun cWW (/ p1 p2 sspw myObj ss)
(setq p1 (getpoint "
Pick first corner: "))
(setq p2 (getcorner p1 "
Specify opposite corner: "))
(if
(setq sspw (ssget "W" p1 p2 '((0 . "*POLYLINE")))
[code].....
Without the (repeat () portion, it was working ok with selection window, however it only would run the commands for a single polyline. What needs to be done without overhauling the code? The lisp has worked on a drawing-wide basis, however needs to run on only on user-windowed polylines since there are other polylines within the drawing which are attached to layouts via viewports.
View 9 Replies
View Related
Jun 1, 2006
Is there a way to have the Arrow leader convert to Loop leader in one click. Our company standards use diamond tags and sometimes i have to change the arrow to loop by inserting a leader.
View 9 Replies
View Related
Jul 12, 2012
Is there a lisp that will allow me to do a continuous dimension, but will alternate the dimension position from low, high, low and high? If there is no lisp already created, how to create one?
See Continuous dimension attachment for example.
I work at a glass and glazing company and this is how we dimension mullion width and DLO. See typical window dimensioning attachment for window elevation with dimensions.
View 6 Replies
View Related
Nov 14, 2013
I have a list ("temp.dwg" "temp2.dwg") and would like to add the string "insert text here" into each item in the list resulting in ("insert text heretemp.dwg" "insert textheretemp2.dwg"). how would i go about doing that using LISP?
View 2 Replies
View Related
Oct 7, 2013
Is there a way to programatically set a visual style before a drawing actually opens?
We have some huge models and people seem to forget to change their visual styles back to 2D wireframe before saving and exiting drawings. Some models will crash on some workstations when trying to open in a rendered mode.
I found a lisp with a function that looked to set viewport visual styles. But it does not seem to be supported anymore. --> (vla-put-VisualStyle vport 1)
View 9 Replies
View Related
Oct 11, 2012
I'm trying to write a lisp routine that, when I invoke the mleader command, osmode is set to "nearest" & orthomode is set off. I then would like the original settings to be returned.
attached is what I have written so far:-
View 4 Replies
View Related
Jun 20, 2013
Lisp that switches back on Selection Preview i.e. thickens and highlights lines when you hover over them?I don't know why, but they are always unticking the boxes.
View 4 Replies
View Related
Sep 7, 2012
Is it possible to execute a certain command based on multiple selections withinin a dcl? for example: two radio colums, one with selections A and B, and a second with selections 1 and 2. is it possible to program commands based on user selections from each column? ex: if A and 1- do a command. A 2- do a different command, etc...
I tried :
(action_tile "key1" "(setq A t")
(action_tile "key2" "(setq B t")
(action_tile "key3" "(setq 1 t)(done_dialog)")
(action_tile "key4" "(setq 2 t)(done_dialog)")
(if
(and (a) (1)
)
(command ...
but was unsuccessful. no matter which combination was selected, the command under all combinations would run.
View 2 Replies
View Related
Jun 3, 2013
I am trying to find a lisp that would get an attribute value (tag name = NBR_5) . I'm trying to run a simple routine that would let the user place the value from the titleblock attribute as text on a drawing. I see a ton of articles regarding getting attributes but I am not well versed in programming.
View 9 Replies
View Related
Jun 22, 2012
I have a routine that work fine, but I receive a nil at the end of command. How to fix that?
View 7 Replies
View Related
Oct 9, 2013
I'm trying to find acceptable point values to feed to the vlax-3d-point function for a vla-addmtext function. With vanilla lisp I just provide the point as x y = "7/32" "2-3/8". So I assumed that I could drop a 0 in for the z like: (VLAX-3D-POINT "7/32" "2-3/8" 0).
Then I thought I was going to be tricksy and try (vlax-3D-point (getpoint)) believing that I could pick the point and get what I need to feed the function, but yet again, no deal. The command line gave me:
node
of #<variant 8197 ...>
Nothing I can use in my code. So how do I find the point in a format that vlax-3d-point will like?
View 9 Replies
View Related
Dec 19, 2011
What is the magic word for put a point at each end of an arc, the lisp I have only put a point at center of the arc.
(defun cAA ( / i j ss e1 e2 p1 p2 p3 points )
(if (setq i -1 ss (ssget '((0 . "ARC"))))
(progn
[Code].....
View 5 Replies
View Related
Dec 30, 2011
Is there a quick way of getting the value of an attribute?
I have an attributed block called "tp_attributes" and it has and attribute called "OrderNum".
I just want to be able to quickly grab that value.
View 3 Replies
View Related
May 29, 2013
I use Spell Check regularly and I always check the entire drawing. I would like to add to the Spell macro so that when I pick Spell from the toolbar it goes past the Check Spelling window and begins checking the entire drawing.
I believe I need to insert Alt S into my macro to select Start from the window to begin the check. Is there a character or series of characters that will represent Alt in a macro?
View 1 Replies
View Related
Nov 8, 2011
I upgraded from Autocad 2004 to 2012 recently and my lisp file doesnt work anymore.
what it's supposed to do is when looking at the layout tab that you want you can switch to the model space location of the same zoom as the layout tab without messing with the layout zoom.
(defun c:msp ()
(setq cm (getvar "cmdecho"))
(setvar "cmdecho" 0)
(command"view" "d" "tmp")
(setvar "tilemode" 0)
(command"pspace")
(princ "Click TWICE on desired VPORT: ")
(command "mspace" pause "view" "s" "tmp")(princ)
(setvar "tilemode" 1)
(command "view" "r" "tmp")
(setvar"cmdecho" cm)
(princ)
)
View 4 Replies
View Related
Oct 27, 2012
I need a program that simulate this DOS command: dir /on/b *.dwg >list.txt
it list all dwg files on current open dwg file folder and sort them and finally put them in a text file with list.txt name. something like thistype list.txt)
test1.dwg
test2.dwg
test100.dwg
test256.dwg
test1005.dwg
(sort alphabetically and logically) because of disabled DOS utility in my PC I need a pure lisp functions, I tried to wrote this program but I couldn't!!
(defun c:listMaker()
(vl-load-com)
(setq path (getvar "dwgprefix"))
(setq fn "list.txt")
[code]...
and also I need a append a string(='This Is EOF') in the last line of the "list.txt" file.
View 8 Replies
View Related
May 10, 2012
I have text objects with the same Z value and I will select as follows:
(setq sstxt (ssget '((0 . "TEXT")(8 . "APS-text"))))
How to store this value in another variable "zvalue" to apply to:
(command "change" "select text objects" "" "_p" "_e" zvalue "") ?
View 9 Replies
View Related
Oct 17, 2011
the following returns true since the @ symbol tests for an alpha character.. (wcmatch "S101" "@*").What is the Dot Net equivalent?
View 2 Replies
View Related
Jul 10, 2012
Is there a command that is the opposite of starting an application to open up a file? Like:
(startapp "PlaySound.exe" (findfile "CuckooClock.wav"))
Instead of starting an application, how to shut all of its instances down. Let’s say I have iTunes and/or Internet Explorer w/ a few tabs open and I can close them down without getting to the application to terminate it the usual way.
Naturally,
(endapp "iTunes.exe") doesn’t work :-))
View 3 Replies
View Related
Apr 13, 2012
I am trying to get my original layer and lintype reinstated after the user is finished with the pline..I know Im suppose to use the while command but am now completely lost on which way to do this
(DEFUN c:TEST1 ()(if (not (tblsearch "LTYPE" "MYWC")) (command "-linetype" "LOAD" "MYWC" "C:/COUNTER.LIN" ""));SECOND PROGRAM...;CREATE CORESPONDING LAYER...(command "._Layer" "Make" "WC LEIDING" "Ltype" "Continuous" "" "Color" "211" "" "")(SETQ MYOLDCELTYPE (GETVAR "CELTYPE"))(SETVAR "CELTYPE" "MYWC")(while (PROGN(COMMAND "pline")(SETVAR "CELTYPE" MYOLDCELTYPE)))
View 5 Replies
View Related
