AutoCAD Visual LISP / AutoLISP :: Translate VBA Syntax

May 11, 2012

How can i translate VBA syntax :

 currMenuGroup.Menus.item(i).item(j).SubMenu.item(k).Caption

In VLISP

I want to find a submenu in a partial menu like :

TPS

" Test"
"Subtest-versionnumber"

To compare the version number !

View 4 Replies


ADVERTISEMENT

AutoCAD Visual LISP / AutoLISP :: Continuous Dimension Lisp That Alternate Its Position

Jul 12, 2012

Is there a lisp that will allow me to do a continuous dimension, but will alternate the dimension position from low, high, low and high?  If there is no lisp already created, how to create one? 

See Continuous dimension attachment for example.

I work at a glass and glazing company and this is how we dimension mullion width and DLO. See typical window dimensioning attachment for window elevation with dimensions.

View 6 Replies View Related

AutoCAD Visual LISP / AutoLISP :: Add String To Each Item In List Using Lisp

Nov 14, 2013

I have a list ("temp.dwg" "temp2.dwg") and would like to add the string "insert text here" into each item in the list resulting in ("insert text heretemp.dwg" "insert textheretemp2.dwg").  how would i go about doing that using LISP?

View 2 Replies View Related

AutoCAD Visual LISP / AutoLISP :: Opening Drawings With Default Visual Style Set To 2D Wireframe

Oct 7, 2013

Is there a way to programatically set a visual style before a drawing actually opens?

We have some huge models and people seem to forget to change their visual styles back to 2D wireframe before saving and exiting drawings.  Some models will crash on some workstations when trying to open in a rendered mode.

I found a lisp with a function that looked to set viewport visual styles.  But it does not seem to be supported anymore. --> (vla-put-VisualStyle vport 1)

View 9 Replies View Related

AutoCAD Visual LISP / AutoLISP :: Write A Lisp Routine That Invoke The Mleader Command

Oct 11, 2012

I'm trying to write a lisp routine that, when I invoke the mleader command, osmode is set to "nearest" & orthomode is set off. I then would like the original settings to be returned.

attached is what I have written so far:-

View 4 Replies View Related

AutoCAD Visual LISP / AutoLISP :: Visual Effect Settings?

Jun 20, 2013

Lisp that switches back on Selection Preview i.e. thickens and highlights lines when you hover over them?I don't know why, but they are always unticking the boxes.

View 4 Replies View Related

AutoCAD Visual LISP / AutoLISP :: Combinations In DCL?

Sep 7, 2012

Is it possible to execute a certain command based on multiple selections withinin a dcl?  for example:  two radio colums, one with selections A and B, and a second with selections 1 and 2.  is it possible to program commands based on user selections from each column?  ex: if A and 1- do a command.  A 2- do a different command, etc...

I tried :

 (action_tile "key1" "(setq A t")
 (action_tile "key2" "(setq B t")

 (action_tile "key3" "(setq 1 t)(done_dialog)")
 (action_tile "key4" "(setq 2 t)(done_dialog)")

(if
(and (a) (1)
)
(command ...

but was unsuccessful.  no matter which combination was selected, the command under all combinations would run.

View 2 Replies View Related

AutoCAD Visual LISP / AutoLISP :: Get Attribute Value

Jun 3, 2013

I am trying to find a lisp that would get an attribute value (tag name = NBR_5) . I'm trying to run a simple routine that would let the user place the value from the titleblock attribute as text on a drawing. I see a ton of articles regarding getting attributes but I am not well versed in programming.

View 9 Replies View Related

AutoCAD Visual LISP / AutoLISP :: Nil At The End Of Command

Jun 22, 2012

I have a routine that work fine, but I receive a nil at the end of command. How to fix that?

View 7 Replies View Related

AutoCAD Visual LISP / AutoLISP :: 3D Point From X And Y?

Oct 9, 2013

I'm trying to find acceptable point values to feed to the vlax-3d-point function for a vla-addmtext function. With vanilla lisp I just provide the point as x y = "7/32" "2-3/8". So I assumed that I could drop a 0 in for the z like: (VLAX-3D-POINT "7/32" "2-3/8" 0).

Then I thought I was going to be tricksy and try (vlax-3D-point (getpoint)) believing that I could pick the point and get what I need to feed the function, but yet again, no deal. The command line gave me: 

node
of #<variant 8197 ...>

Nothing I can use in my code. So how do I find the point in a format that vlax-3d-point will like?

View 9 Replies View Related

AutoCAD Visual LISP / AutoLISP :: Put Point At Each End Of Arc?

Dec 19, 2011

What is the magic word for put a point at each end of an arc, the lisp I have only put a point at center of the arc.
 
(defun cAA ( / i j ss e1 e2 p1 p2 p3 points )
(if (setq i -1 ss (ssget '((0 . "ARC"))))
(progn

[Code].....

View 5 Replies View Related

AutoCAD Visual LISP / AutoLISP :: Get The Value Of Attribute

Dec 30, 2011

Is there a quick way of getting the value of an attribute?

I have an attributed block called "tp_attributes" and it has and attribute called "OrderNum".

I just want to be able to quickly grab that value.

View 3 Replies View Related

AutoCAD Visual LISP / AutoLISP :: Use Of The Alt Key In A Macro

May 29, 2013

I use Spell Check regularly and I always check the entire drawing. I would like to add to the Spell macro so that when I pick Spell from the toolbar it goes past the Check Spelling window and begins checking the entire drawing.

I believe I need to  insert Alt S into my macro to select Start from the window to begin the check. Is there a character or series of characters that will represent Alt in a macro?

View 1 Replies View Related

AutoCAD Visual LISP / AutoLISP :: Toggle Between PS And MS

Nov 8, 2011

I upgraded from Autocad 2004 to 2012 recently and my lisp file doesnt work anymore.

what it's supposed to do is when looking at the layout tab that you want you can switch to the model space location of the same zoom as the layout tab without messing with the layout zoom.

(defun c:msp ()
(setq cm (getvar "cmdecho"))
(setvar "cmdecho" 0)
(command"view" "d" "tmp")
(setvar "tilemode" 0)
(command"pspace")
(princ "Click TWICE on desired VPORT: ")
(command "mspace" pause "view" "s" "tmp")(princ)
(setvar "tilemode" 1)
(command "view" "r" "tmp")
(setvar"cmdecho" cm)
(princ)
)

View 4 Replies View Related

AutoCAD Visual LISP / AutoLISP :: DOS DIR Command

Oct 27, 2012

I need a program that simulate this DOS command: dir /on/b *.dwg >list.txt

it list all dwg files on current open dwg file folder and sort them and finally put them in a text file with list.txt name. something like thistype list.txt)

test1.dwg
test2.dwg
test100.dwg
test256.dwg
test1005.dwg

(sort alphabetically and logically) because of disabled DOS utility in my PC I need a pure lisp functions, I tried to wrote this program but I couldn't!!

(defun c:listMaker()
(vl-load-com)
(setq path (getvar "dwgprefix"))
(setq fn "list.txt")
[code]...

and also I need a append a string(='This Is EOF') in the last line of the "list.txt" file.

View 8 Replies View Related

AutoCAD Visual LISP / AutoLISP :: Get Z Value From Text

May 10, 2012

I have text objects with the same Z value and I will select as follows:

(setq sstxt (ssget '((0 . "TEXT")(8 . "APS-text"))))

How to store this value in another variable "zvalue" to apply to:

(command "change" "select text objects" "" "_p" "_e" zvalue "") ?

View 9 Replies View Related

AutoCAD Visual LISP / AutoLISP :: What Is Dot Net Equivalent

Oct 17, 2011

the following returns true since the @ symbol tests for an alpha character.. (wcmatch "S101" "@*").What is the Dot Net equivalent?

View 2 Replies View Related

AutoCAD Visual LISP / AutoLISP :: How To End Application

Jul 10, 2012

Is there a command that is the opposite of starting an application to open up a file?  Like:

(startapp "PlaySound.exe" (findfile "CuckooClock.wav"))

Instead of starting an application, how to shut all of its instances down.  Let’s say I have iTunes and/or Internet Explorer w/ a few tabs open and I can close them down without getting to the application to terminate it the usual way.

Naturally,

(endapp "iTunes.exe") doesn’t work :-))

View 3 Replies View Related

AutoCAD Visual LISP / AutoLISP :: Can't Get While Command Right?

Apr 13, 2012

I am trying to get my original layer and lintype reinstated after the user is finished with the pline..I know Im suppose to use the while command but am now completely lost on which way to do this

(DEFUN c:TEST1 ()(if (not (tblsearch "LTYPE" "MYWC")) (command "-linetype" "LOAD" "MYWC" "C:/COUNTER.LIN" ""));SECOND PROGRAM...;CREATE CORESPONDING LAYER...(command "._Layer" "Make" "WC LEIDING" "Ltype" "Continuous" "" "Color" "211" "" "")(SETQ MYOLDCELTYPE (GETVAR "CELTYPE"))(SETVAR "CELTYPE" "MYWC")(while (PROGN(COMMAND "pline")(SETVAR "CELTYPE" MYOLDCELTYPE)))

View 5 Replies View Related

AutoCAD Visual LISP / AutoLISP :: Z Value For Points?

Jan 5, 2012

I have a drawing that has 2D pipeline (only x and y, z value =0) and 3 topo contour lines ( with x, y and z vaules). I need to divide the the 2D pipeline into say 2000 points and then get the corresponding z values from the topo contour lines. I think it can be done by interpolating between the z values for the two apparent intersection points of the 2D line and the contour lines, the x and y values will be the same for the points that falls between these two aparent intersections. Is there any lisp out there that can do that.

View 7 Replies View Related

AutoCAD Visual LISP / AutoLISP :: Pline Dimensioning

Sep 2, 2005

I am looking for an AutoLISP routine, which gives all aligned dimensions of a closed polyline, drawn in 3d.

I have attached a 2D drawing for reference.

View 9 Replies View Related

AutoCAD Visual LISP / AutoLISP :: Return Name Of Different Folders?

May 15, 2013

The following gives me the first folder string, with no back-slashes, that the drawing exists in.

(setq FirstFolder
 ((lambda (/ tmpDir tmpPos)
 (substr
 (setq tmpDir (getvar "dwgprefix"))
 (+ 2 (setq tmpPos (vl-string-search "\" tmpDir)))
 (- (vl-string-search "\" tmpDir (1+ tmpPos)) (1+ tmpPos))))))

Is there a way to find the name of the second folder?

Is there a way to find the name of the third folder?

The string length of the characters for each of the first, second, third (and so on) folders are different, which means I can't count character using the "substr" function.

View 8 Replies View Related

AutoCAD Visual LISP / AutoLISP :: Sorting A List

Aug 17, 2012

I have a list that contains data like this,

"Tree-01-08-AA5"
"Tree-04-12-QV"
"Tree-10-30-QS"

How would I go about sorting this list by AA5, QV, QS? I know how to use vl-sort and reverse, but I do not understand how I would go about this. 

View 9 Replies View Related

AutoCAD Visual LISP / AutoLISP :: Rotating 600 Drawings

Jul 18, 2012

I have to go into approx 600 3D Models and rotate them all by 90.

I've just tried to search for a lisp that will do this to all of these files in one directory and can't find one. Something that will do this and save loads of time. I need to do this tonight so that these MEP files will all be ready for tomorrow morning.

View 1 Replies View Related

AutoCAD Visual LISP / AutoLISP :: Compare Two Lists

Aug 12, 2012

I have two lists to compare and want the difference in an third list.

like

list1 ("A" "B" "C")
list2 ("A" "B" "C" "D" "E")

the difference in list3 ("D" "E")

View 9 Replies View Related

AutoCAD Visual LISP / AutoLISP :: Layers ON / OFF Automatically

Jan 25, 2013

I know that for layers ON/OFF in current open dwg file, I should use:

[I just want to On/Off for my "STAMP" layer]

(COMMAND "LAYER" "ON" "STAMP" "")
(COMMAND "LAYER" "OFF" "STAMP" "")

but I have more than 150 dwg file and I should open all of dwgs one by one and setting ON/OFF for STAMP layer for every drawing and it takes so much time!  

I just want to select files and LISP program set the STAMP layer to ON or OFF value.

View 5 Replies View Related

AutoCAD Visual LISP / AutoLISP :: File Not Found (CI)

Sep 21, 2012

Autocad 2008. Certain command and mouse control unable function.. which the error dialog box  shown when start up launch the autocad...

" Customization file load failed. File not found: COMMANDLINE.cui

View 1 Replies View Related

AutoCAD Visual LISP / AutoLISP :: Line Between Two Lines?

Feb 15, 2013

I am trying to draw a line between two lines and I put together the following. It works great if the start/end points are perpendicular to each other. How do I solve if line one start point is in a positive direction and line two is in a negative direction? 

(defun c:test ()
 (setq L1 (car (entsel "
Select the first line: "))
L2 (car (entsel "
Select the second line: "))
 )

[code]....

View 9 Replies View Related

AutoCAD Visual LISP / AutoLISP :: Get X / Y Coordinates Of A Pline

Feb 1, 2012

 Is there anyway to use LISP to list the x,y coordinates of a pline?

View 3 Replies View Related

AutoCAD Visual LISP / AutoLISP :: How To Save DWG To DXF Format

Oct 19, 2011

I am trying to save a *.DWG file to *.DXF format. The DXF file is created, but when i tried to open the same DXF file in AutoCAD,it is showing as "not a Valid DXF file".

Code :

// Open *.DWG file

Autodesk.AutoCAD.ApplicationServices.Application.DocumentManager.Open("....abc.dwg",true);

// Save to *.DXF format

Autodesk.AutoCAD.ApplicationServices.Application.DocumentManager.MdiActiveDocument.Database.Saveas("....def.dxf",Autodesk.AutoCAD.DatabaseServices.DwgVersion.Current);

// Close and discard changes,if any

Autodesk.AutoCAD.ApplicationServices.Application.DocumentManager.MdiActiveDocument.CloseAndDiscard();

When i used the save as command in Autocad, it is showing different dxf file formats(AutoCAD 2010 DXF,AutoCAD 2007 /LT 2007 DXF etc..). How to save in particular DXF format. If possible give me a sample C# code for this.

View 6 Replies View Related

AutoCAD Visual LISP / AutoLISP :: File Name In A List

Aug 26, 2012

I have a list like ("a.dwg" "b.dwg" "c.dwg") and an filename "b.dwg"

I want to know if the file name is a part of the list. which function must be used for this?

View 5 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved