AutoCAD Visual LISP / AutoLISP :: Rename Block With Spaces?
Sep 3, 2012
I have to batchplot a lot of drawings but before that i need to rename a block in every drawing. I want to get from ABC 123 to ABC_123.
this is my code right now for the part to rename the block.
(princ "-rename
" File#1)
(princ "b
" File#1)
(princ "ABC 123
" File#1) <---- here i get the problem.
(princ "ABC_123
" File#1)
This comes in the prompt:
Command: -rename
Enter object type to rename
[Block/Dimstyle/LAyer/LType/Material/multileadeRstyle/Style/Tablestyle/Ucs/VIew/
VPort]: b
Enter old block name: ABC
Cannot find block "ABC".
How do i include space and 123 in the princ?
I am using map3D 2012.
View 4 Replies
ADVERTISEMENT
Nov 30, 2012
I have a block that i want to insert several times and revised each one to be different to do this i would have to insert it and rename the blocks that come in and then reinsert i would like to insert and have a lisp explode the main block and rename the other 2 blocks with a suffix at the end depending on how many times its in the drawing... can this even be done? My original block name that will be first inserted is "BENT PULLEY NOTES" it needs to explode after i drop it in and then there are 2 blocks within that called "Bent Pulley" and "Bent Pulley DYN" that i was hoping to keep the names but add a number at the end depending on how many are in the drawing already...
here is a lisp that i have found... it would work if i didn't have nested blocks and only wanted the one block to be insert and not explode...
(defun c:Test (/ e i name Bname )
(setq e nil)
(command "_.-insert" "Drawing1.dwg" pause "" "" "")
(if (setq e (entlast))
[Code] .......
View 9 Replies
View Related
Aug 15, 2011
how to write a LISP that enable me to direct automatic rename multiple block name?
Example is i have 3 block names as " A123 " , " A728 " , " A003 "
When i activate the LISP, it will automatic rename the block name to be " CAD1" , "CAD2" & "CAD3", whereby
the word "CAD" i can change whenever i start to use it change multipld block name.
View 9 Replies
View Related
May 17, 2013
I wanna change my block name to attribute text value, any similar lisp code?
View 9 Replies
View Related
Oct 22, 2009
I am working on a large project where a 3rd Party firm has turned over 100s of drawings that we need to get into our system. The problem is that they did not name their physical files properly. We have a particular numbering system for our drawings, the engineering firm did fill in our attributed title block properly and used our numbering system correctly within the drawing. However, their physical file name follows their format. We need to have the physical file name match the information in the title block to get into our system.
Is there a way to "Batch Rename" these files by reaching into the title block and then renaming the physical file to match the attribute?
I have to be honest, I may use AutoCAD 50 to 60 hours per week, but I am no programmer! I am just the go-to person here for AutoCAD whom is stuck trying to come up with a efficient solution for the project team whose engineering firm could not follow our procedures! I was hoping some sort of batch routine could take care of this problem for us instead of us having to individually rename each physical file one by one.
View 9 Replies
View Related
Jan 12, 2012
Is it possible to turn off the UCS icon in model space as well as in each layout? I'd like to set this up in the acaddoc.lsp files so that they're turned off in all opened drawings.
View 6 Replies
View Related
Aug 16, 2013
I'm making a program that reads a property file that follows the format:
"key=value" for each line on the text file.
One specific line has the key "file" and the value is some file path that includes a space.file=C:/my folder/my file.txt
Now I can extract what the key and value is for any given line in the file.However, I want to put all of the data into an Associative List so that I will not need to keep opening the file each time I search for information. I've been using the cons function in order to create a dotted list, which is successful. However I have an issue when I add this dotted list to the end of my associative list.
Suppose I have a key and a value already stored inside variables. Below I have two lines of code, first the dotted list portion is printed, and works as expected. The second line adds that dotted list to the associative list:
(princ "Cons: ")(princ (cons key val)) (princ "") ;Prints (file . C:/my folder/my file.txt)(setq assocList (append assocList (cons key val))) ;Error message here.
The error that I receive says "; error: bad list: "C:/my folder/my file.txt"..Here is the change:
(setq assocList (append assocList (list (cons key val))))
Now, the dotted list is inserted properly and looks like this after printing the whole associative list: ((version . 1.0.1) (file . C:my foldermy file.txt))
View 1 Replies
View Related
Feb 6, 2012
I have to put some trusts between two beam. It sounds easy but i'm unable to handle the divide and round off commands in the lisp. See attachement also.
To draw my trust between the 2 beams, what I normally do, is that I manually take the distance between the two points say it's 10 000 and wrote it down. Then I divide it by my max gap, say 1200, it is the max space between trust.
10 000/1200 = 8.333333 that's the result of how much trust and space between them that i'll need, 8 trusts, 9 spaces between the 2 beams. (That is what I'm unable to do in the lisp, tell it to round off 8.333 to 9 and use 9 for divide command)
What I manually do at this point to draw these trust is that I must create a temporarly line between the 2 beams, perpendicularly to these and divide it by 9.
It gives me 8 cross (or point) to draw my trusts. All this is long to do manually because I have many bay in building and I have to redo this operation for every the bay.
So, what I would like the lisp to ask is:
Specify distance between two beams (Between where and where) :
Specify the lenght of the trust :
Specify max gap: I would like to answer a number here, say like 1200 max
(The lisp should draw the lines on the current layer, color and linetype of the current layer and not draw a line at the beginning and at the end because that's where my Beams are. I hoped you understand, see attachement.
Should also have something that handle a ESCAPE hit or cancel, something like this:
(defun trap1 (errmsg) (command "_.undo" "_end") ; undo end (setvar "osmode" oldsnap) ; restore variables (setvar "cmdecho" 1) ; enable cmdecho (setq *error* temperr) ; restore old error handler (prompt "
[Code] ....
View 4 Replies
View Related
Oct 29, 2013
I would like to update a CUIX and rename it, both the file name and the internal customization group name/description. The main issue is that the associated MNL file will fail to load after the renaming.
The internal name is currently the same as the file name with spaces replaced by underscores.
I have tried the CUIX transfer method, I have tried simply renaming the file and leaving the internal name alone, I have also tried renaming to .ZIP, and modifying the one file inside that contains the internal name/description, recompiling the ZIP and renaming back to CUIX.
As stated above, using any of the above methods the main issue is that the associated MNL file will fail to load. This is with Civil 3D 2014. Also the customization group name may appear in the CUILOAD dialog without underscores and depending on the method the ribbon tabs will not even appear.
I've also noted that the MNL file associated with the partial CUIX loads twice in Civil 3D 2014 and only once in AutoCAD 2013. I haven't done further testing on that.
This is mainly cosmetic as our current CUIX has 2011 in the name and I would like to update to 2014.
View 1 Replies
View Related
Jan 10, 2013
I am looking for a lisp that will rename all the layouts automatically. I tried the Layoutlist function but the output is not in order. Is there anyway that i can get all the layouts in a drawing from left to right order. for eg. i have layouts from layout1, layout 2........layout10). The layoutlist returns as layout1,layout10 etc...instead of layout 1 layout 2.
View 4 Replies
View Related
Nov 25, 2012
what i would like to do is rename (externally) and repath about 4-8 xrefs in a drawing set of about 100 drawings.
you may ask why? it is because we are trying to establish a template set of drawings for a civil design office. and when we start a new project, copy over the drawings to the relevant project folder, change the project number, run the script across the drawings and go from there. I've also tried this using the reference manager, but it doesn't work when you change the name of the xrefs (loses association)
basically i know if i could use a lisp i would run it using autoscript or something equal. All i need is to figure out the code to change the project number in the xref
for example
current - "xxxx-PN009999-aaa-00-survey.dwg"
change to - "xxxx-PN001234-aaa-00-survey.dwg"
from my research so far, the easiest way is to make a lisp with the following
-rename
b
xxxx-PN009999-aaa-00-survey
xxxx-PN001234-aaa-00-survey
-xref
p
xxxx-PN001234-aaa-00-survey
c:acadcivildummyfolderxref
If this is the correct code, do i have to rename the CAD xref files in explorer first?
View 1 Replies
View Related
Sep 23, 2013
I am looking for a LISP to automatically rename all my layouts. I would like the first layout to say "HWY 400 (01)", second layout "HWY 400 (02)", third layout "HWY 400 (03)" ect..
View 4 Replies
View Related
Oct 3, 2012
I have 30 blocks per drawing about 60 drawings. Each block starts with the jobname has other block info and then the block type. For example
Bldg31-MechEquip_ABC
Bldg33-MechText_DEF
Bldg45-ElecEquip_GHI
I want the output to be just ABC, DEF, and GHI.
I have a rename script but I dont know where to go from here. How can I tell it to remove everything up and including the "_" symbol?
View 5 Replies
View Related
Feb 29, 2008
I would like to batch rename all blocks in a drawing to NEWJOB01, NEWJOB02 ,etc. I can't use wildcards with RENAME command because the old names don't always have a common name. I prefer to use a lisp routine.
View 9 Replies
View Related
Apr 5, 2013
I'm new to working with scripts and have played with it a little bit but my knowledge is severly lacking, I picked up script pro and have had some success batching simple commands.
What I have is a large database with differing layer convensions that I want be able to run a script that will open rename layers save and close, the layers are not of the same name but similar enough that I could set peramiters for less then a duzon layer names and catch my target then rename it to a standard, for example "A-wall exterior" to "A-WL-EXT", a simple enough command but within the database the "A-wall exterior" could be one of a duzon simmilar names.
My thought was to run the -rename la "layername" "layername" qsave script but when the original layer is not found it gets stuck untill script pro times out and fails. If there is some way to search out names and once found rename that would work.
View 9 Replies
View Related
Jun 24, 2009
I need to do three things in a LISP routine for around 200 drawings. First, I need rename lots of old layer to new standard layer name, like change layer name "CL-RAILWAY-0" to new layer name "CL-0".
Secondly, I need translate some layer to standard layer, like all the things on layer "CL-WATER-160" to layer "CL-0"
Last, change some linetype, like change linetype"CENTER" to "CENTERLINE". I can do all those things by "CHECKSTANDARD" manually, but I really need someway faster and easier.
View 9 Replies
View Related
Oct 30, 2012
I am looking for a lisp routine or rename mulitple blocks by keeping the same name, but adding a suffix to it.
I have used "rename" block to add a prefix to multiple drawings, but it doesnt let you add a suffix. (As far as I can see)
View 7 Replies
View Related
Dec 27, 2013
How to add the sheet description field into the rename & renumber window? I ask this because during the sheet set-up process we use the sheet description often, and I would like to go from sheet to sheet without having to right click and edit every sheet.
Civil 3D x64 2012
Win 7 x64 Ultimate
I7 3820 (3.6ghz quad core with HT)
32gig RAM (Corsair XMS3 4x8g)
Intel x z79 mobo (BOXDX79TO 2011 socket)
Radeon HD 7850 2gb GDDR5
View 2 Replies
View Related
Oct 3, 2013
I get an AutoCAD drawing from my conveyor manufacturer who have buried a block (tagname) in all of their conveyor blocks.
The only way to remove them is to manually use BEDIT and erase the tagname block.
Is there a way through Autolisp to search all blocks in a drawings and if the tagname block is part of the definition of the conveyor block, erase the tagname block or redefine the conveyor block without the tagname block.
View 8 Replies
View Related
Mar 8, 2013
When dynamic blocks are inserted they're assigned an anonymous block name. I'd like to be able to retrieve the name of the parent block after selecting the block on screen using AutoLisp.
Need a bit of code that handles this?
View 3 Replies
View Related
Apr 5, 2013
Create a routine that looks for a block based on a portion of that block name, using a specified path or search path.
For example, block to search for is BLOCKABC123, so if someone inputs ABC or 123 as a block name, it will locate that block within that folder and inserts it into the drawing at a user specified location.
Ideally, if there is a check in that if it finds more than one match, then perhaps it flags or prompts you to choose 1, 2, or 3 option which block to use. But I can live without this special function if it requires too much time to code.
View 8 Replies
View Related
Feb 12, 2012
I need to match few attribute values from one block to different block. I download a lisp file called; ca.lsp which can match the single attribute value. I modified it for more than one attribute value matching. It is ok but still wish to overcome two issues for batch prcess
1. picking up the blocks by selection
2. click the alternative block numbers of times to match the numbers of attribute values I needed.
How to modify this lisp I can run it by block name selections instead of picking selection which enable me to run batch process for numbers of drawing? That will be good...
Lisp & Demo file attached (Match attribute value, A, B & C to Attribute 1, 2 & 3).
View 3 Replies
View Related
Apr 18, 2013
I am learning autolips and i found a problem that i can´t solved.
(vl-load-com)(defun c:pmb ( / ss ent pt )(prompt "
selec block : ")(setq ss (ssget '((0 . "INSERT")))) (setq ent (ssname ss 0)), (setq pt (cdr (assoc 10 (entget ent)))) (command "point" pt))
wich this code you select one block and insert one point at insert point´s block.
which this other code yo select all block and insert all point.... but in one block
(vl-load-com) (defun c:pmb11 ( / sele cod bloque nbloque lista pt ) (prompt "
block: ") (setq sele (ssget ( List'(0 . "INSERT"))) Cod 0 )cod (1+ cod) (repeat (sslength sele) (setq bloque (ssname sele cod)) (setq pt (cdr (assoc 10 ( entget bloque)))) (command "punto" pt) );repeat )
View 4 Replies
View Related
Dec 23, 2013
I have a dwg with 40 blocks that have a non-annotative property. I can go through 1 by 1 and change the property to annotative and redefine the block. Is it possible to automate this? I have done some google searches but have not found anything I am able to cut and paste or put together to get it to work.
Civil 3D 2012 SP4.0 Windows 7 Enterprise 64-bit
C3D 2014 SP1
Dell M6600, Core i7 @ 2.3GHz, 16 GB ram
Dell T3500 workstation, too much ram to post
View 3 Replies
View Related
Mar 2, 2012
I am trying to select all blocks of a certian name. I am using the following:
(setq ss1bk (ssget "_X" (list (cons 2 blkname))))
My issue is that this will not select any dynamic or attribute blocks that are not at the default insert state.
how to select all of a block by name including reguardless of current state?
View 9 Replies
View Related
Sep 26, 2013
I have a routine that counts dynamic blocks by visibility state and stores that information then prompts for scale and color and stores that information. Then a legend begins to build from the data and a collection of blocks to reflect the dynamic blocks and their visibility state. Everything works great on all of the machines around the office except on one. When the legend begins building, the one user is getting the DDATTE dialog instead of allowing the values to populate as expected. So, I had him change ATTREQ to 0 an run again. No deal, the same thing happens again and again. And; it only occurs on the one machine.
View 5 Replies
View Related
Feb 21, 2013
I need to get VLA-Object from block name.
here there is a code to get block name from VLA-Object:
(vlax-get-property obj (if (vlax-property-available-p obj 'EffectiveName) 'EffectiveName 'Name) )
but I need the inverse of this code exactly:
blockname(as a string)==>VLA-object
(defun GetVLA_BName (BName).......
so, how can I do it?
View 9 Replies
View Related
Nov 27, 2013
I need to pick a nested block in drawing, I prepared this code to get name of selected blocks:
(defun c:test ( / e obj blkName)(while T (while (Not (setq e (entsel "
Select a BLOCK to edit: ")))) (setq obj (vlax-ename->vla-object (car e))) (if (= (vlax-get-property obj 'ObjectName) "AcDbBlockReference") (setq blkName (vlax-get-property obj (if (vlax-property-available-p obj 'effectivename)'effectivename 'name)) );setq );if (princ (strcat "
Block Name is: " BlkName)));while);defun
But, how to select a nested block?
View 4 Replies
View Related
Jun 17, 2013
I continue with my problems.....
I get attribute value from block and put it in a list:
(repeat (setq cnt (sslength sset))
(setq attValue (GetAttributeValue (ssname sset i) "tag1"))
(setq attValue2 (GetAttributeValue (ssname sset i) "tag2"))
[Code]...
When I try to put them in a table...
(foreach item lst
(vla-setText mytable
row 0
(last item)
)
(setq row (1+ row))
)
only put one ( attValue2) at column, and i like put 2 values, each one in a column in the same row
View 9 Replies
View Related
Aug 5, 2013
I would like to select all instances of a block, and put a new block on top of them using the same properties (insertion, rotation) but am unsure how to do this
View 3 Replies
View Related
Mar 29, 2012
I need fix a block attribute named "NrPunct.dwg"
MyProblem: after I insert the block “NrPunct” in my drawing ,, I cannot modify "textHeight", when I edit the ATTDEF (or attribute) with the command “DDEDIT” . Why?
You see my arrow in the picture pozamea.jpg…
View 2 Replies
View Related
