I created a block with attributes on various layers to make it possible to turn them on/off by need. The I created a multileader style and set this block as a content. When I create a multileader all attributes appear on the same layer as the multileader itself (text entities in the block keep their layer). Is it possible to manage attribute's layer in multileader?
Please see the attached file.
I would like to select blocks based on the layer of one or more attributes. The obvious method would be to isolate that layer and select the ones with attributes that display. But many of the values are empty!
View 9 Replies View RelatedI wanna transfer my attribute block values to another attribute text blocks , is there any lisp for that?
Is there a possibility for sum tag values of choice attribute blocks to inside of another attribute text block ?
Background: Someone exploded an attribute block and copied it hundreds of times throughout a project, each time changing the Attribute Tag to match the Value they expected to appear in their drawing. The drawing must be xrefed, so the attribute definitions do not appear.
(There is only 1 attribute in the block.)
Proposed Solutions:
1:AutoLISP routine which copies Tag data from Attribute Definition into Value of Attribute Block:
Prompt-Select Attribute Definition
Copy Tag data
Prompt-Select Attribute Block
Paste data into Value
(Allow repeat to speed workflow)(*PREFERRED*)
2:AutoLISP routine which copies Tag data from Attribute Definition into Default Value and creates a new Block:
Prompt-Select Attribute Definition
Copy Tag data
Paste data into Default Value
Create New Block
(Select Multiple Objects)(Creates tons of new blocks which are messy)
A2008. Is there a setvar, setenv, registry entry etc. that can be used to change the scale of Multileaders with annotative off to have the same effect that DIMSCALE has on Q leaders? I want to have a single scale-independent Multileader style and modify it on the fly along with DIMSCALE and LTSCALE. I'd use Qleader but UCS's do odd things to text position and orientation.
View 4 Replies View RelatedI got this nice little lisp from [URL] .....
(defun c:mt2ml ( / oobj nobj nstrg) (vl-load-com) (setq oobj (vlax-ename->vla-object (car (nentsel "
Select source text: ")))) (if (= (vlax-get-property oobj 'ObjectName) "AcDbMText") (setq nstrg (vlax-get-property oobj 'TextString)) (exit) ) (command "_MLEADER") (while (= 1 (logand (getvar "CMDACTIVE") 1)) (command PAUSE)) (setq nobj (vlax-ename->vla-object (entlast))) (if (= (vlax-get-property nobj 'ObjectName) "AcDbMLeader") (vlax-put-property nobj 'TextString nstrg) (exit) ) (entdel (vlax-vla-object->ename oobj)) (princ))
It converts MText to a Multileader.
My goals would be as follows:
The multileader should end up on the same layer as the Mtext. (Currently it uses the current layer.)The multileader should hold the same rotation as the Mtext. (Currently it goes to zero.)The multileader should be created in the same location as the Mtext, without the user having to click. (Currently the multileader is created wherever the user clicks.)The multileader should be created without a leader. We can add one afterwards if needed, but for many we don't need a leader. (We're just using the object as mtext with a box around it.)
I would like to use the entmod method to rotate the text in a Multileader object. Reading the DXF code tells me the dotted pair of 42 seems to be the rotation angle, but entmoding that does nothing. Obviously I don't know how to modify this complex object.
View 3 Replies View RelatedI'm looking for a lisp routine that can find and replace multileader text.
I want to replace "T." with "T+" and "B." with "B+".
All the multileaders are on layers with a suffix of "-elev".
I'm trying to send field value to a multileader with a block. I tried:
(VL-CMDF "_.mleader" (getpoint "
Specify leader arrowhead location: ") pause "%<AcVar.17.0 Lisp.*granitelbl* f "%tc1">%")
Maybe it was a naive of me to charge in so boldly. The field appears to have made it in but it does not act like a field and does not reflect the correct value or update. In fact I get no response at all. In fact using "update field" "all" selects the fields but reports that they are locked.
My multileader style uses a block as a content. How can I find world coordinates of insertion point of block entity within multileaders?
View 3 Replies View RelatedI am trying to find a lisp that would get an attribute value (tag name = NBR_5) . I'm trying to run a simple routine that would let the user place the value from the titleblock attribute as text on a drawing. I see a ton of articles regarding getting attributes but I am not well versed in programming.
View 9 Replies View RelatedIs there a quick way of getting the value of an attribute?
I have an attributed block called "tp_attributes" and it has and attribute called "OrderNum".
I just want to be able to quickly grab that value.
select all blocks on certain layers in a drawing, check attribute CIRCUIT in each block if it starts with MS then attribute CONTROL = switched. I hope thats clear enough the way
(defun c:control()
(graphscr)
(Setq sc (ssget "X" '((0 . "INSERT")
[Code].....
Say I have a block that contains two attributes, one contains a value that is a number and another contains a value that is letters. I have many of these blocks placed in a drawing, could you create a lisp that would return the sum of the number value and return it to the command line along with the letter value. Something like this:
Sum--------Item
128 RP
389 TD1
2389 SP4
I continue with my problems.....
I get attribute value from block and put it in a list:
(repeat (setq cnt (sslength sset))
(setq attValue (GetAttributeValue (ssname sset i) "tag1"))
(setq attValue2 (GetAttributeValue (ssname sset i) "tag2"))
[Code]...
When I try to put them in a table...
(foreach item lst
(vla-setText mytable
row 0
(last item)
)
(setq row (1+ row))
)
only put one ( attValue2) at column, and i like put 2 values, each one in a column in the same row
i want to select a block and the lisp copies TAG1 into my clipboard (i want to paste it in excel)
View 9 Replies View RelatedLisp or lisp code for sum attribute tag values and paste result to an another attribute block tag?
i attached jpg for explain to what i want to do .
I need fix a block attribute named "NrPunct.dwg"
MyProblem: after I insert the block “NrPunct” in my drawing ,, I cannot modify "textHeight", when I edit the ATTDEF (or attribute) with the command “DDEDIT” . Why?
You see my arrow in the picture pozamea.jpg…
I run into some issues where i need to change an attribute based on where a block is located on a drawing. I started this routine to select the block, and then select the text that I want to change the block attribute to. It seems like everything is working up until this point. What I want to do is then replace the first selected with the second selection. How would I go about doing that? here's my code so far:
(defun C:uf ()
(if (setq fuse (nentsel "
Select Fuse Attribute: "))
(progn
(setq en (car fuse))
(setq enlist (entget en))
(setq fuseatt(cdr (assoc 1 enlist)) ) ) )
(if (setq mt(car (entsel "
Select Text: ")))
(progn
(setq enlist2 (entget mt))
(cdr (assoc 1 enlist2))
(setq wiren(cdr (assoc 1 enlist2)) ) ) )
)
Is there any simple code for to sum length of lines which is i am choosing and copying result to chosen attribute tag ?
View 1 Replies View Related(cdr (assoc 1 (entget (entnext (car (entsel))))) ...
gives the string value of the attribute, but i would like to retrieve the field value attached to that attribute.
I am trying to customize AutoCAd for a special domain where attribute values need to have a type. I can have a clean integrated solution by manipulating the acad.dcl or base.dcl .I am using AutoCAD 2012 . I want to extend the " define attribute" and "edit attribute" dialog boxes to promt the user for a value type when they define an attribute .I can't find the definition for these dialog boxes in acad/ base dcl files. Ideally I want to add another tile definition to these dialog boxes .If that is not possible atleast spawn a different dialog box from the "define attribute " dialog box that will collect the value type from the user.
View 2 Replies View RelatedI am trying to update my Title Block with a LISP routine (As the title implies).
So far, this is what i have...
(defun c:aTest (/ ss att)
(if (setq ss (ssget "X" (list (cons 0 "INSERT")(cons 2 "TB_PARAMOUNT_ELC")
(cons 66 1)(if (getvar "CTAB")(cons 410 (getvar "CTAB"))
(cons 67 (- 1 (getvar "TILEMODE")))))))
(progn
(foreach ent (mapcar 'cadr (ssnamex ss))
(setq att (entnext ent))
[Code]...
The title block, block name is static. The attribute name is static.
My ultimate goal is to copy the value of one attribute and "paste" that into the value of another attribute, and itterate this through the entire project.
I have a block "MANAGER" with Two Attributes "CETOP" and "CEBOT" I would like a lisp to replace what ever is in those attributes with defined text, for my purposes "Text1" and "Text2". I would like a simple routine that even I can understand so I can apply it to a couple of other lisp projects I have.
View 6 Replies View RelatedI want to edit 1 attribute value in a block to number all my blocks (eg A001, A002, A003...) (example picture attached)
I know about the at tout and at tin but I need a lsp routine that only changes one attribute value without having to double click and go through that.
i attached a lsp routine, how to edit and remove everything except the value part.
significance of extra dxf 1 groups in the entity data of a multiline attribute? I am looking at one for the first time, so I don't know whether or not to expect multiple 1 groups. In the single example I have created there are two and the first one seems to be ignored. Can I count on that being the case all the time? Data for the one I'm looking at follows, and what shows up on the drawing display is only the contents of the second dotted pair with 1 as a key.
;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
((-1 . <Entity name: 7ec37d18>)
(0 . "ATTRIB")
(330 . <Entity name: 7ec37d10>)
(5 . "323")
(100 . "AcDbEntity")
(67 . 0)
(410 . "Model")
[code]...
From what I can gather the attributes of a MVBlock are on the Viewblocks inside of it.
With LISP, how can I access these attributes to get and set them?
Any routine where I could keep picking on my exit arrow blocks (showing how many persons exiting from each space) one-by-one and the program would add up the numbers. For example I pick on blocks with numbers of 2, 4 & 3 and I would get 9.
View 3 Replies View RelatedI have several lisp routines that we have used since release 12 that now dont work in 2012. They all placed blocks with attributes, allowed user to fill in and continued to finish. In 2012 the attribute dialog box does not come up and point information for block placement is filled in the attributes. Is there a system variable that changes dialog boxes in 2012?
View 7 Replies View RelatedI found this routine [URL]...... that changes the width of an attribute in a block. After use it, I need to use the ATTSYNC to update the other instances of the bloc in my project.
How to modify this lisp that I receive a prompt to choose if the width attribute will be change just in the selected block or in all instances of the block? In that way, I would not have to use the ATTSYNC command each time.
i am wondering if it is possible to alter a specific attribute in cca 250 files? I have this template which has like 50-70 attributes,but not all of them are used. I have to change only one attribute in all of the files. For instance, i have an attribute with a specisfic tag, but the content of it is ie MARK, i want to change MARK to PETER, without having to open,click,retype,save,close every file. Is it possible to automatize it somehow? maybe lisp, batch or even VB?
View 2 Replies View Related