AutoCAD Visual LISP / AutoLISP :: How To Properly Link To DCL
May 27, 2012
The problem I'm having is that even if I try using the most basic code, taken from this tutorial:
[URL].........
I still get an error as if the dcl file didn't exist. Both the lisp and the DCL files are both set in the same folder, together, no sub-folders or anything like that.
Here's my
- DCL:
samp1 : dialog {
label = "Structural Holes";
ok_cancel;
}
- LISP
(defun C:samp1()
(setq dcl_id (load_dialog "C:UsersEugen IancuDesktoplearnLispsamp1.DCL"))
(if (not (new_dialog "C:UsersEugen IancuDesktoplearnLispsamp1.DCL" dcl_id))
(COMMAND "ZOOM") ;;THIS IS WERE MY FUNCTION GETS STUCK. I ADDED THIS SO I COULD [code]......
View 5 Replies
ADVERTISEMENT
Jun 19, 2013
Me and a friend are trying to work on a LISP routine to select objects in a drawing and change their attributes to "ByLayer" and other things. He is a familiar with the AutoCAD commands, I have a general idea of how to use LISP and we're trying to put our heads together to solve some workflow issues at our job.
-aDiagram
(defun c:set23 ()(setq uecho (getvar "cmdecho"))(setvar "cmdecho" 0)(command "setbylayer" "al" "" "n" "y")(command "-layer" "c" "23" "*")(command "-xref" "d" "*")(command "-purge" "al" "" "*" "n")(setvar "cmdecho" uecho)(princ))
View 8 Replies
View Related
Oct 13, 2011
Have an AutoLisp program that inserts a block with attributes. Been using it forever. Yesterday I ran the program and somehow when the block is inserted, it skips the Y scaling factor. The program should insert a block at a point with a X scale of 19.2, Y scale of 19.2, Rotation at 0 and then four attribute values.
What is happening is the block is inserted at the correct point and X scaling factor, but the Y scaling factor goes in for the Rotation angle (19.2 degrees), the Rotation angle goes in as the first attribute and the remaining attributes are shifted over and the last attribute is missing.Line of code is:
(command "INSERT" "CNVTAG" inspt scl scl 0 text1 text2 text3 text4)
The command prompt displays:
Command: (command "INSERT" "CNVTAG" inspt scl scl 0 text1 text2 text3 text4)
INSERT Enter block name or [?] <NEWWHDBORD>: CNVTAG
Units: Inches Conversion: 1.0000
Specify insertion point or [Basepoint/Scale/Rotate]: Specify scale factor <1>:
19.20000000000000
Specify rotation angle <0>: 19.20000000000000
Enter attribute values
Conveyor number: 0 Conveyor Speed: 5315-BCS Motor Horsepower: 1.5hp Release
Mode: 45/90fpm
I looked at the system variables INSUNITS, INSUNITSDEFTARGET and INSUNITSDEFSOURCE AND THEY ARE ALL SET AT 0..Currently using AutoCAD 2010.
View 3 Replies
View Related
Dec 5, 2007
Is there any way to grab the Object ID or name from a layout tab to use in a field? I wish to link the layout name to a callout block so that if the layout tab changes position and name (inserting a new tab), the call out block will update no matter what page it is on. Without using the Sheet Set manager.
View 9 Replies
View Related
Feb 19, 2012
LISP code to link to a scr.file.I would like to run ACADDOC.lsp with abobe code everytime I open a drawing.But I want to link the KISP file to script file of mine like C:
View 3 Replies
View Related
Feb 10, 2013
i have in Drive C a file "Steel.lsp" have function called IPE
in this function have this line
(setq n (getstring "
Enter IPE Height :"))
i loaded it
i created a menu and command in it called "Amr"
no i need when i click Amr Run IPE with string 270 then click enter
i need all this happen automaticlly when i click on "Amr" on menu
how???
View 2 Replies
View Related
Sep 13, 2013
I'd like to set up a blockwith different attributes like Roomname, Floor, Area,...
Therefore I'd like to link a polyline of the drawing with the block and it shows me its area. I know how it works with fields, but not how to connect it when the field is within a block.
Is there a LISP for that?
View 4 Replies
View Related
Jan 24, 2013
Is there a way by which I can link a paper space block attribute to model space block attribute
In other words
Paper space as a block Title and attribute "QTY"
Model space has a block X and attribute "QTY_MODEL"
Is it possible to edit "QTY" and as a result get automatic update on "QTY_MODEL"
I am not familiar with diesel/macros yet in Acad.
Config :: Intel (R) Xeon (R) CPU E31245 @ 3.30 GHz, 16.0 GB, 64bit win7
Inventor 2013 and Vault Basic 2013
View 4 Replies
View Related
Feb 21, 2013
Possible to link an xref layer and local layer so they display the same (eg. sync viewport colour, linewieght, line type)?
I insert xref's for my base drawing but legend is on local layers and I would like to be able to ensure that the line colour and linetype always match...
View 4 Replies
View Related
Jul 12, 2012
Is there a lisp that will allow me to do a continuous dimension, but will alternate the dimension position from low, high, low and high? If there is no lisp already created, how to create one?
See Continuous dimension attachment for example.
I work at a glass and glazing company and this is how we dimension mullion width and DLO. See typical window dimensioning attachment for window elevation with dimensions.
View 6 Replies
View Related
Nov 14, 2013
I have a list ("temp.dwg" "temp2.dwg") and would like to add the string "insert text here" into each item in the list resulting in ("insert text heretemp.dwg" "insert textheretemp2.dwg"). how would i go about doing that using LISP?
View 2 Replies
View Related
Oct 7, 2013
Is there a way to programatically set a visual style before a drawing actually opens?
We have some huge models and people seem to forget to change their visual styles back to 2D wireframe before saving and exiting drawings. Some models will crash on some workstations when trying to open in a rendered mode.
I found a lisp with a function that looked to set viewport visual styles. But it does not seem to be supported anymore. --> (vla-put-VisualStyle vport 1)
View 9 Replies
View Related
Oct 11, 2012
I'm trying to write a lisp routine that, when I invoke the mleader command, osmode is set to "nearest" & orthomode is set off. I then would like the original settings to be returned.
attached is what I have written so far:-
View 4 Replies
View Related
Jun 20, 2013
Lisp that switches back on Selection Preview i.e. thickens and highlights lines when you hover over them?I don't know why, but they are always unticking the boxes.
View 4 Replies
View Related
Sep 7, 2012
Is it possible to execute a certain command based on multiple selections withinin a dcl? for example: two radio colums, one with selections A and B, and a second with selections 1 and 2. is it possible to program commands based on user selections from each column? ex: if A and 1- do a command. A 2- do a different command, etc...
I tried :
(action_tile "key1" "(setq A t")
(action_tile "key2" "(setq B t")
(action_tile "key3" "(setq 1 t)(done_dialog)")
(action_tile "key4" "(setq 2 t)(done_dialog)")
(if
(and (a) (1)
)
(command ...
but was unsuccessful. no matter which combination was selected, the command under all combinations would run.
View 2 Replies
View Related
Jun 3, 2013
I am trying to find a lisp that would get an attribute value (tag name = NBR_5) . I'm trying to run a simple routine that would let the user place the value from the titleblock attribute as text on a drawing. I see a ton of articles regarding getting attributes but I am not well versed in programming.
View 9 Replies
View Related
Jun 22, 2012
I have a routine that work fine, but I receive a nil at the end of command. How to fix that?
View 7 Replies
View Related
Oct 9, 2013
I'm trying to find acceptable point values to feed to the vlax-3d-point function for a vla-addmtext function. With vanilla lisp I just provide the point as x y = "7/32" "2-3/8". So I assumed that I could drop a 0 in for the z like: (VLAX-3D-POINT "7/32" "2-3/8" 0).
Then I thought I was going to be tricksy and try (vlax-3D-point (getpoint)) believing that I could pick the point and get what I need to feed the function, but yet again, no deal. The command line gave me:
node
of #<variant 8197 ...>
Nothing I can use in my code. So how do I find the point in a format that vlax-3d-point will like?
View 9 Replies
View Related
Dec 19, 2011
What is the magic word for put a point at each end of an arc, the lisp I have only put a point at center of the arc.
(defun cAA ( / i j ss e1 e2 p1 p2 p3 points )
(if (setq i -1 ss (ssget '((0 . "ARC"))))
(progn
[Code].....
View 5 Replies
View Related
Dec 30, 2011
Is there a quick way of getting the value of an attribute?
I have an attributed block called "tp_attributes" and it has and attribute called "OrderNum".
I just want to be able to quickly grab that value.
View 3 Replies
View Related
May 29, 2013
I use Spell Check regularly and I always check the entire drawing. I would like to add to the Spell macro so that when I pick Spell from the toolbar it goes past the Check Spelling window and begins checking the entire drawing.
I believe I need to insert Alt S into my macro to select Start from the window to begin the check. Is there a character or series of characters that will represent Alt in a macro?
View 1 Replies
View Related
Nov 8, 2011
I upgraded from Autocad 2004 to 2012 recently and my lisp file doesnt work anymore.
what it's supposed to do is when looking at the layout tab that you want you can switch to the model space location of the same zoom as the layout tab without messing with the layout zoom.
(defun c:msp ()
(setq cm (getvar "cmdecho"))
(setvar "cmdecho" 0)
(command"view" "d" "tmp")
(setvar "tilemode" 0)
(command"pspace")
(princ "Click TWICE on desired VPORT: ")
(command "mspace" pause "view" "s" "tmp")(princ)
(setvar "tilemode" 1)
(command "view" "r" "tmp")
(setvar"cmdecho" cm)
(princ)
)
View 4 Replies
View Related
Oct 27, 2012
I need a program that simulate this DOS command: dir /on/b *.dwg >list.txt
it list all dwg files on current open dwg file folder and sort them and finally put them in a text file with list.txt name. something like thistype list.txt)
test1.dwg
test2.dwg
test100.dwg
test256.dwg
test1005.dwg
(sort alphabetically and logically) because of disabled DOS utility in my PC I need a pure lisp functions, I tried to wrote this program but I couldn't!!
(defun c:listMaker()
(vl-load-com)
(setq path (getvar "dwgprefix"))
(setq fn "list.txt")
[code]...
and also I need a append a string(='This Is EOF') in the last line of the "list.txt" file.
View 8 Replies
View Related
May 10, 2012
I have text objects with the same Z value and I will select as follows:
(setq sstxt (ssget '((0 . "TEXT")(8 . "APS-text"))))
How to store this value in another variable "zvalue" to apply to:
(command "change" "select text objects" "" "_p" "_e" zvalue "") ?
View 9 Replies
View Related
Oct 17, 2011
the following returns true since the @ symbol tests for an alpha character.. (wcmatch "S101" "@*").What is the Dot Net equivalent?
View 2 Replies
View Related
Jul 10, 2012
Is there a command that is the opposite of starting an application to open up a file? Like:
(startapp "PlaySound.exe" (findfile "CuckooClock.wav"))
Instead of starting an application, how to shut all of its instances down. Let’s say I have iTunes and/or Internet Explorer w/ a few tabs open and I can close them down without getting to the application to terminate it the usual way.
Naturally,
(endapp "iTunes.exe") doesn’t work :-))
View 3 Replies
View Related
Apr 13, 2012
I am trying to get my original layer and lintype reinstated after the user is finished with the pline..I know Im suppose to use the while command but am now completely lost on which way to do this
(DEFUN c:TEST1 ()(if (not (tblsearch "LTYPE" "MYWC")) (command "-linetype" "LOAD" "MYWC" "C:/COUNTER.LIN" ""));SECOND PROGRAM...;CREATE CORESPONDING LAYER...(command "._Layer" "Make" "WC LEIDING" "Ltype" "Continuous" "" "Color" "211" "" "")(SETQ MYOLDCELTYPE (GETVAR "CELTYPE"))(SETVAR "CELTYPE" "MYWC")(while (PROGN(COMMAND "pline")(SETVAR "CELTYPE" MYOLDCELTYPE)))
View 5 Replies
View Related
Jan 5, 2012
I have a drawing that has 2D pipeline (only x and y, z value =0) and 3 topo contour lines ( with x, y and z vaules). I need to divide the the 2D pipeline into say 2000 points and then get the corresponding z values from the topo contour lines. I think it can be done by interpolating between the z values for the two apparent intersection points of the 2D line and the contour lines, the x and y values will be the same for the points that falls between these two aparent intersections. Is there any lisp out there that can do that.
View 7 Replies
View Related
Sep 2, 2005
I am looking for an AutoLISP routine, which gives all aligned dimensions of a closed polyline, drawn in 3d.
I have attached a 2D drawing for reference.
View 9 Replies
View Related
May 15, 2013
The following gives me the first folder string, with no back-slashes, that the drawing exists in.
(setq FirstFolder
((lambda (/ tmpDir tmpPos)
(substr
(setq tmpDir (getvar "dwgprefix"))
(+ 2 (setq tmpPos (vl-string-search "\" tmpDir)))
(- (vl-string-search "\" tmpDir (1+ tmpPos)) (1+ tmpPos))))))
Is there a way to find the name of the second folder?
Is there a way to find the name of the third folder?
The string length of the characters for each of the first, second, third (and so on) folders are different, which means I can't count character using the "substr" function.
View 8 Replies
View Related
Aug 17, 2012
I have a list that contains data like this,
"Tree-01-08-AA5"
"Tree-04-12-QV"
"Tree-10-30-QS"
How would I go about sorting this list by AA5, QV, QS? I know how to use vl-sort and reverse, but I do not understand how I would go about this.
View 9 Replies
View Related
