AutoCAD Visual LISP / AutoLISP :: Dimensions And Selection Sets
Nov 1, 2011
I have a lisp routine that creates a "frame wall" and I want to be able to automatically dimension said wall within the same routine. I have created two sets of points, each set being on its own new layer. I have made selection sets of each set of points, and want to cycle through each set dimensioning as required. This what I have so far for this part of the routine:
(command "DIMSCALE" 24)
(setq sel1 (ssget "x" '("VPOINTS")))
(setq TC (polar (ssname sel1 0) (dtr 180.0) 9))
(command "DIMLINEAR" (ssname sel1 0) (ssname sel1 1)) "V" (polar TC (dtr 180.0) 9) "")
[code]...
When I run the program I get the error: bad point argument. So what I think is happening is that the ssname command is not returning the actual value but just the name? I am new to AutoLisp and even newer to selection sets so be easy... Along with this, I am also curious as to how a selection set is ordered when it is chosen ie how does it determine what would be in (ssname sel1 0). Also, how would one go about deleting the points in these selection sets after the dimensioning has been completed.
View 5 Replies
ADVERTISEMENT
Jan 10, 2002
I wish to collect a selection set of blocks in paperspace of a certain name. For model space I would use the following line:
(setq x1 (ssget "_x" '((2 . "*etc*") (410 . "model"))))
when it comes to setting paperspace as the 410 ssget list value as the name can be modified and I need it to work in all drawings. I tried
setting a variable to the paperspace layout name and using a print function at the (410 . "model") point but without sucess.
View 9 Replies
View Related
Oct 3, 2011
I wrote a lisp program which creates a selection set using ssget. Then I use the bounding box commands to get the lowest point of that selection set. Now I want to move that selection set as a whole using the vla-move command. I am having trouble doing this. Is this possible? Can we vla-move a selection set? Is there a workaround?
View 2 Replies
View Related
Jul 27, 2013
I need to create a command which could change a color of an allready existing selection set when activated. For example i have a command which creates a cube, where each specific group of lines were added to different selection sets. how can i recall any created selection set by its name and change its color?
View 9 Replies
View Related
Dec 4, 2012
I was adding a lot of aligned dimensions to a drawing and some where along the way they changed from aligned dimensions to rotated dimensions, even in the same string of dimensions.
View 9 Replies
View Related
Nov 15, 2013
I've created a lisp that draws the boltholes of a pipe flanges, using the correct number of holes, at the correct diameter at the correct bolt-hole diameter and then rotates. Everything works seamlessly, when i do just one flange. But I've discovered that fewuently there will be mulitple times when a user will have to perform the command.
So the idea I had was to do the following:
Select all circles with (setq CirclesFirst (ssget "X" (list (cons 0 "CIRCLE"))))
Go through the code to create the new circles.
Select all circles with (setq Circles (ssget "X" (list (cons 0 "CIRCLE"))))
Remove selection set "CirclesFirst" from "Circles".
But what for some reason (command "_.select" Circles "R" CirclesFirst "") does not work.
View 9 Replies
View Related
Jun 29, 2013
When selecting any dimension type (from the standard AutoCAD toolbars) i would like it to already be in the layer "dimensions". Currently it starts in layer 0.
I've been browsing the web a bit and found a lot about it but people are talking about LISP's?? I can do magic things in AutoCAD but i am a complete stranger to LISP's, Macro's, etc... Would like to learn but where to start..
Anyway i can cover this with something else then writing an LISP?
View 9 Replies
View Related
Jul 16, 2012
I'm not able to control the dimensions of image slide..Whatever value I use for height and width the image is displayed too small in the tile.
here's my
: image {
key = "sld";
height = 5;
width = 30;
[code]....
View 3 Replies
View Related
Oct 25, 2012
The title says it all, Im trying to find a way to select just the vertical dimensions. Quick select doesn't work because there's no difference between a vertical and a horizontal dimension, so i was wondering if there was a LISP or something else i could do to accomplish this.
View 5 Replies
View Related
Dec 7, 2012
I have tools like flatten and toolpac to correct plines and other things to be parallel to the ucs (world), but not for dimensions.
I attached a file with problem dins, any tool to get them back to flat?
[URL]
View 1 Replies
View Related
Dec 21, 2012
I'm working up a routine to simplify clearing some space. I've been cruising here and other places piecing together something, but what I have ended up with is a routine that deletes all of the intended information (possibly needing repetition for those hard-to-reach blocks), but also deletes dimensions from the model space.
There are several things our company does which are "non-standard" but we have been at it for a while and I am trying to work with what I was given. Following is the code.
;;; not sure who Jeff M is, but assuming this bit is from him(defun odbx-test (/ dbx_doc) ;; edited 5/28/06 by Jeff M (if (< (setq dbxver (atof (getvar "ACADVER"))) 15.06) (progn (alert "ObjectDBX method not applicablein this AutoCAD version" ) (exit) (princ) (gc) ) (progn (if (= (atoi (getvar "ACADVER")) 15)(progn (if (not (vl-registry-read "HKEY_CLASSES_ROOT\ObjectDBX.AxDbDocument\CLSID" ) ) (startapp "regsvr32.exe" (strcat "/s "" (findfile "axdb15.dll") """)
[code]....
View 2 Replies
View Related
Apr 10, 2012
I'm trying to fix an issue with entlast where if the user hits escape during the process, the wrong entity gets erased, etc. Here's the problem code...
From a function that would have just inserted a dynamic block at 0,0 then modified it - here's where we pick up..
(SETQ ss (SSGET "L"))
(vl-cmdf "_.copybase" (getvar "LASTPOINT") ss "")
(prompt "
Pick insertion point... then rotation angle ")
(vl-cmdf "erase" ss "")
(vl-cmdf "_.pasteblock" PAUSE)
(setvar "polarmode" 1)(setvar "autosnap" 63)(setvar "osmode" osm1)
(vl-cmdf "_.ROTATE" (entlast) "" (cdr (assoc 10 (entget (entlast)))) PAUSE)
(vl-cmdf "_.EXPLODE" (entlast) ""
)
I would like to do..(setq ss (vl-cmdf "_.pasteblock" PAUSE)), but of course, that doesn't work - it returns "T".
My goal is to get rid of the entlast usage from the last two lines - unexpected cancels rotate and explode the wrong entities.
If I try (setq ss (entlast)) or (ssget "L") after the pastblock, I might still get the wrong selection set if the user hits cancel before picking.
View 4 Replies
View Related
Mar 2, 2012
I am trying to select all blocks of a certian name. I am using the following:
(setq ss1bk (ssget "_X" (list (cons 2 blkname))))
My issue is that this will not select any dynamic or attribute blocks that are not at the default insert state.
how to select all of a block by name including reguardless of current state?
View 9 Replies
View Related
Feb 28, 2013
Is it possible to get a selection set of what was just pasted into drawing?
View 8 Replies
View Related
Apr 23, 2013
I'm putting together some quick function that I can send 2 arguments and get from it the total area of a given hatch on the given layer. I think everything is in order but I'm having trouble with the selection set filter:
(DEFUN GET-HATCH-AREA (HATCH LAYR / area sset) (COND((AND(ssget "X" '((0 . "HATCH") (2 . HATCH) (8 . LAYR))) (SETQ area 0) (VLAX-FOR H (SETQ sset (VLA-GET-ACTIVESELECTIONSET (VLA-GET-ACTIVEDOCUMENT (VLAX-GET-ACAD-OBJECT)))) (SETQ area (+ (VLA-GET-AREA h) area))) (ALERT(STRCAT "Total area = " (IF (OR (= (GETVAR "lunits") 3) (= (GETVAR "lunits") 4) ) (STRCAT (RTOS area 2) " sq. in. (" (RTOS (/ area 144) 2) " sq. ft.)") (RTOS area) ) ) ) (VLA-DELETE sset) ) ) ))
View 9 Replies
View Related
Oct 16, 2013
with the mouse I can select objects on the screen and then start a command that uses these objects.
How can I perform this in lisp?
I can create my selection set, that's no problem, but how can I 'make it active' for an external function?
(ssget "_C" p0 p1 '((0 . "TEXT")))
???
(c:txtexp)
View 2 Replies
View Related
Jan 27, 2003
R14 Autolisp:
I can create an empty selection set (setq EMss (ssadd)). As I loop through a list I can use the counter to create selection sets on the fly by using:
(set (read (strcat "ss" (itoa cnt))) EMss) and even keep a list of the ssets created with (setq sslst (cons (strcat "ss" (itoa cnt)) sslst)). But when I try to add an ename to the ss with (ssadd ename (read (strcat "ss" (itoa cnt))), I get a error: bad argument type (SSADD NEXTE (READ (STRCAT "ss" (ITOA CNT)))).
why I can create the sets but not add to them this way? I can add to them from the command line.
View 9 Replies
View Related
Oct 3, 2011
I wrote a lisp program which creates a selection set using ssget. Then I use the bounding box commands to get the lowest point of that selection set. Now I want to move that selection set as a whole using the vla-move command. Can we vla-move a selection set?
View 8 Replies
View Related
Feb 13, 2012
I need to copy a selection set from p1 to p2.to do this I wrote the following
(defun c:test () (setq sel (ssget)) (setq p1 (getpoint "
Origine: ")) (setq p2 (gettpoint p1 "
Destination: ")) (command "_.copy" sel "" p1 p2))
works, but this way I can not see objects dynamically attached to the mouse cursor.
To visualize this effect, I noticed that I can use:
(command "_.copy" sel "" pause pause)
but in this way I can not save the variables p1 and p2: I need for these, subsequently in the rest of thefunctions lisp.
View 4 Replies
View Related
Feb 6, 2006
Have Lisp to place aligned dimensions on each segment of a polyline?
I would use it for reinforcing bar detailing.
View 9 Replies
View Related
May 14, 2012
how to sensibly extract angular dimensions as attributes.
I can extract the attributes from a block containing angular dimensions, the attributes list angular dimensions as a field but don't actually list the number of degrees for the angular dimension.
It is the number of degrees that I am actually trying to obtain - but I cannot work out how to obtain the information
View 3 Replies
View Related
Dec 2, 2010
I need a lisp routine which will delete all the dimensions inside selected block or blocks, including nested blocks inside.
View 9 Replies
View Related
Dec 19, 2012
make a LISP that will work with my room dimensioning? I'd like to be able to specify the width and depth of the room using a command similar to the "dist" command, and then click a point to place a text based on the distances gathered. I'd also like the text to be formated into architectural units and displayed like this: 12'-0" X 13'-5". Also, if possible, round the result to the nearest inch (to avoid 1/2" and 1/4" dimensions).
View 9 Replies
View Related
Apr 15, 2012
To get the 'File Selection dialog box' in AutoCAD via LISP, which command should I use other than 'GETFILED' ?
I have a program which using GETFILED to select the drawing file , but I think this dialog box size is too small to browse folder/file , as you cant see the favorites list and you cant resize the dialog box.
View 3 Replies
View Related
Aug 10, 2012
I'm working on a lisp that goes through a whole list of files and does different things to those files. I've been racking my brain for a way to select just a folder via a dialogue box, but haven't found a way. I'm sure it can be done with dcl, but I don't know where to start.
This would not be the standard "file" selection box, but would only list the folders and let me select one even if there are others "under" them. This is what I'd like it to look like.
I'm not sure if there is a standard AutoCAD box that I could call for this or not
View 5 Replies
View Related
Jan 12, 2012
How to Set a previous selection to nil from say a move command?
View 5 Replies
View Related
Nov 1, 2011
Looking to make a selection set of points that are on a specific layer, and then create a dimension between, in this case, two points. I feel like it should be very simple, but I can't get it to work for the life of me. Here is the test code I've been playing around with:
(defun c:test (/ sel1 TC)
(setq sel1 (ssget "X" '((8 . "VPOINTS"))))
(setq TC (polar (entget (assoc 10 (ssname sel1 0))) (dtr 180.0) 9))
(command "DIMLINEAR" (entget (assoc 10 (ssname sel1 0))) (entget (assoc 10 (ssname sel1 1))) "V" (polar TC (dtr 180.0) 9) "")
[code].......
View 1 Replies
View Related
Feb 8, 2012
How to get the individual components of a block that has just been exploded within a lisp routine into a selection set. I want to alter the layer of each element to the insert layer of the block. I may also make one or two other changes according to what I find in the block.
View 8 Replies
View Related
Oct 16, 2012
I downloaded a lisp routine that will align block attributes. The problem is I can only select the attributes one at a time. I'd like to be able select multiple attributes using the selection window or a crossing window, but I haven't had much luck. If you use the AEATTSHOW command, it give you a prompt to "select using window" by pressing W. I'd like to have the same functionality for my Align attributes routine.
Below is the portion of code I currently have to select attributes one at a time:
;* Select all attributes to align with the parent selected above and add the attribute entname and the block
;* entname to a list in format ( (AttrEntName BlkEntName) (AttrEntName BlkEntName) (AttrEntName BlkEntName) )
;*
while (/= TempAttr nil)
(setq
TempAttr (nentsel "
Select Attributes to align: ")
[Code] .........
View 5 Replies
View Related
Sep 5, 2012
I need the same funcionality as in code below, but without using "command".
The main idea is alowed user to modify Existing Selection Set.
(defun gt:ss->lst (a:ss / i lst ) ;_ / (setq i 0) (if a:ss (progn (repeat (sslength a:ss) (setq lst (cons (ssname a:ss i) lst) i (1+ i) ) ;_ setq ) ;_ repeat (reverse lst) ) ;_ progn ) ;_ if) ;_ defun gt:ss->lst(defun gt:ss_modify (a:en-lst / ) ;_ / ;;create Selection set (setq ss2 (ssadd)) (foreach f:en a:en-lst (ssadd f:en ss2) ) ;_ foreach ;;Run command and fill with initial content (command "_select" ss2) ;;Alow the user to modify the contents (while (/= (getvar "cmdnames") "") (command pause) ) ;_ while ;;get back the list of enames from modified selection set (setq ss3 (ssget "_P")) (setq ss3-lst (gt:ss->lst ss3))) ;_ defun gt:ss_modify(defun tst:gt:ss_modify ( / ) ;_ / (gt:ss_modify (gt:ss->lst (ssget)))) ;_ defum tst:gt:ss_modify
View 8 Replies
View Related
Feb 7, 2013
Tried retrieving an ActiveX selection set in AutoCAD 2013 (AutoCAD Architecture 64bit on Windows 7 is what I am using)?
Using a piece of LISP I got from the ADN developer site, it no longer works and gives this error....
Cannot invoke (command) from *error* without prior call to (*push-error-using-command*).
Converting (command) calls to (command-s) is recommended.
(defun c:erset (/ acApp acDoc selSets ss1)
(vl-load-com)
(setq acApp (vlax-get-acad-object))
(setq acDoc (vla-get-activeDocument acApp))
(setq selSets (vla-get-SelectionSets acDoc))
[code].....
Unfortunately my lisp is very basic.
(defun c:getSset()
(vl-load-com)
(setq ss-vba (vla-item
(vla-get-selectionsets
(vla-get-activedocument
[code]......
What about creating an AutoLisp selection set from .NET - is it possible, if so I would prefer to do that instead?
The goal is to create some objects in .NET (using activeX or managed code) and then have some way to access these objects via the command line I'm assuming they only way is using an AutoLISP selection set.
View 5 Replies
View Related
