I found a lisp to get block attribute data to a other block. See attachment. I can only apply it to one block. I like to apply it to selected blocks or blocks in a group. Is this possible?
View 9 Replies
I have to obtain a selection set of blocks (by window selection and/or single-picks if the user desires) and then an attribute value which I have previously assigned to a variable called TAGVAL to the attribute tag name called PART in that selection set of blocks.
I found a cool routine called RepAtt, but it isn't quite set up to do what I need...
(defun RepAtt (Tag / SourceBlk ValueToCopy SelSet) (vl-load-com) (if (setq SourceBlk (car (entsel "
Select Source Block:"))) (progn (mapcar '(lambda (p) (if (equal (vla-get-tagstring p) Tag) (setq ValueToCopy (vla-get-textstring p)) ) ) (vlax-invoke (vlax-ename->vla-object SourceBlk) 'GetAttributes ) ) (ssget ":L" '((0 . "INSERT") (66 . 1))) (vlax-for DesBlock (setq SelSet (vla-get-activeselectionset (vla-get-activedocument (vlax-get-acad-object)) ) ) (foreach att (vlax-invoke DesBlock 'GetAttributes) (if (equal (vla-get-tagstring att) Tag) (vla-put-textstring att ValueToCopy) ) ) ) (vla-delete SelSet) ) ) ) (RepAtt "WIDGET");<-- Tag Name
I wanna transfer my attribute block values to another attribute text blocks , is there any lisp for that?
Is there a possibility for sum tag values of choice attribute blocks to inside of another attribute text block ?
I have a simple hexagon block with one attribute, i need to be able to copy it and as i do it increases the number by one.
the Block name is note1-2006 the attribute name is NOTENUM. I have tried using some other Lisps but i cant ge them to work. Sometimes i have to put 40 of these on a sketch i hate copying and changing the attribute by one everytime. so it would be nice to copy and as i pick mutliple spots it increase number. Dont know if there is a way to ask user to keep same number or increase. This would save me so much time.
select all blocks on certain layers in a drawing, check attribute CIRCUIT in each block if it starts with MS then attribute CONTROL = switched. I hope thats clear enough the way
(defun c:control()
(graphscr)
(Setq sc (ssget "X" '((0 . "INSERT")
[Code].....
significance of extra dxf 1 groups in the entity data of a multiline attribute? I am looking at one for the first time, so I don't know whether or not to expect multiple 1 groups. In the single example I have created there are two and the first one seems to be ignored. Can I count on that being the case all the time? Data for the one I'm looking at follows, and what shows up on the drawing display is only the contents of the second dotted pair with 1 as a key.
;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
((-1 . <Entity name: 7ec37d18>)
(0 . "ATTRIB")
(330 . <Entity name: 7ec37d10>)
(5 . "323")
(100 . "AcDbEntity")
(67 . 0)
(410 . "Model")
[code]...
i want to select a block and the lisp copies TAG1 into my clipboard (i want to paste it in excel)
View 9 Replies View RelatedI need to match few attribute values from one block to different block. I download a lisp file called; ca.lsp which can match the single attribute value. I modified it for more than one attribute value matching. It is ok but still wish to overcome two issues for batch prcess
1. picking up the blocks by selection
2. click the alternative block numbers of times to match the numbers of attribute values I needed.
How to modify this lisp I can run it by block name selections instead of picking selection which enable me to run batch process for numbers of drawing? That will be good...
Lisp & Demo file attached (Match attribute value, A, B & C to Attribute 1, 2 & 3).
I have attribute data that is entered as a format of 25-6. I need to make these into feet and inches, 25'-6". Is there a way to update these attributes globally or even at least by choosing the block itself? The only thing I can think of is find and replace and I just feel there has to be a better way.
View 9 Replies View RelatedThis time I'm wrestling with getting the values from multiple blocks. The blocks all have the same name but at least the attributes have names this time. Each block have exactly 4 attributes, like: att1 (a number representing chronological order), att2 (some data), att3 (the actual date as a string of when the data was added), att4 (some more data)
I need to get and store the attribute's values. I was hoping to make a selectionset of the blocks and step through using the chronological order number.
At this point I have tried several combinations of foreach and ssget "x" (list (cons 2 MYBLOCK)), but I keep getting errors that I'm sure are telling me that I'm not passing the correct information to the function for iterating through. I'm banging my head.
(DEFUN c:GFOR (/ ATTLST REVBLK CNT CNT1 BLK RBLK ATTVAL ATT REV#)
(SETQATTLST(LIST "R#" "INIT" "DATE" "DESC")REVBLK(ssget "x" (list (cons 0 "INSERT") (cons 2 "REVISION")))CNT0CNT10 )
(vlax-ldata-put "dict" "RevTotal" (BLKCNT "REVISIONS")) (FOREACH BLK REVBLK (SETQ RBLK (ssname BLK CNT1)) (setq ATTVAL (mapcar '(lambda (x) (vla-get-TextString x)) (vlax-invoke (vlax-ename->vla-object RBLK) 'GetAttributes))) (foreach ATT ATTLST (SETQ REV# (STRCAT "REVISION" (1+ CNT)))
(vlax-ldata-put "dict" REV# (member ATTVAL)) (setq CNT (1+ CNT)) ) (SETQ CNT1 (1+ CNT1)) ) (PRINC))
i have found the following lisp in a previous thread: (shows XY coordinates of the selected blocks)
(defun C:MyFunc (/ ss Index Ename Lst)
(while (or (not ss) (= 0 (sslength ss))) (setq ss (ssget '((0 .
"INSERT")))))
(if ss
[Code]....
I want this information to be added to the blocks as hidden attributes so that i can extract them by attout. The work to be done is : attout to excel, autofill an attribute (numbering) then attin.
but my problem is that i cant think of a way to number those blocks IN ORDER (ie top to bottom or left to right) unless by sorting them in excel first by their x or y coordinates
I would like to select blocks based on the layer of one or more attributes. The obvious method would be to isolate that layer and select the ones with attributes that display. But many of the values are empty!
View 9 Replies View RelatedI continue with my problems.....
I get attribute value from block and put it in a list:
(repeat (setq cnt (sslength sset))
(setq attValue (GetAttributeValue (ssname sset i) "tag1"))
(setq attValue2 (GetAttributeValue (ssname sset i) "tag2"))
[Code]...
When I try to put them in a table...
(foreach item lst
(vla-setText mytable
row 0
(last item)
)
(setq row (1+ row))
)
only put one ( attValue2) at column, and i like put 2 values, each one in a column in the same row
I need fix a block attribute named "NrPunct.dwg"
MyProblem: after I insert the block “NrPunct” in my drawing ,, I cannot modify "textHeight", when I edit the ATTDEF (or attribute) with the command “DDEDIT” . Why?
You see my arrow in the picture pozamea.jpg…
I having real difficulty finding a lisp that will find and replace blocks. There are plenty out there and AutoCAD 2013 and lower has a Find and Replace Blocks. However, the frustrating catch is I can seem to find a routine that will allow me to replace only those blocks that I select with a selection set of my choosing. The built in function replaces all of them and will not let you exclude some. We have PID drawings that we want to replace valves on, but not all valves. We don't want to rename. We don't need to BEDIT the existing block.
1) Pick group of blocks
2) specify a new block that will replace all instances of old block
3) replace inserted block with different block. Leaving others alone.
I'm thinking this should be easy, but my search has failed. The blocks in question are not dynamic or attributed either.
I am trying to update my Title Block with a LISP routine (As the title implies).
So far, this is what i have...
(defun c:aTest (/ ss att)
(if (setq ss (ssget "X" (list (cons 0 "INSERT")(cons 2 "TB_PARAMOUNT_ELC")
(cons 66 1)(if (getvar "CTAB")(cons 410 (getvar "CTAB"))
(cons 67 (- 1 (getvar "TILEMODE")))))))
(progn
(foreach ent (mapcar 'cadr (ssnamex ss))
(setq att (entnext ent))
[Code]...
The title block, block name is static. The attribute name is static.
My ultimate goal is to copy the value of one attribute and "paste" that into the value of another attribute, and itterate this through the entire project.
I'm looking for a lisp routine that will globally list all the values from a specific attribute tag within a specific block. The attribute tag is "COMMENT" and the block name is "FSD".
View 9 Replies View RelatedI can't find my notes on how I fixed it. When we insert our title block, it automatically inserts the drawing number. For one user, it doesn't work. The title block inserts, but it won't put in the drawing number. I seem to remember I need to change a setting or something to get it to work, but I can't remember what it is.
View 3 Replies View RelatedI started a lisp that moves blocks according to their attributes and align numeric value in x 0.0. I work currently selected point by point. I will wish it to run at once on a selection set (I am angry with entsel).
(defun c:test (/ sel ent st newpt)
(if (setq eset(ssget))
(progn
[Code]....
I am trying to create a selection set (or LIST) of all objects inside a unnamed GROUP.
I found a means to access the unnamed group, however I am having trouble creating the list.
Command: (entget (cdr (assoc 350 (dictsearch (namedobjdict) "ACAD_GROUP"))))((-1 . <Entity name: 7efe6280>) (0 . "GROUP") (5 . "130") (102 . "{ACAD_REACTORS")(330 . <Entity name: 7efe5c68>) (102 . "}") (330 . <Entity name: 7efe5c68>) (100 . "AcDbGroup") (300 . "") (70 . 1) (71 . 1) (340 . <Entity name: 7efe6268>) (340 . <Entity name: 7efe6260>))
In the example above, there are 2 entities in the group.
What I want to do is to remove a certain entity from the GROUP, then delete the entity.
Repeat until all entities of that type are removed (I can figure this part out...).
How do I create a Selection Set (or LIST) of all entities inside a GROUP?
To access the first GROUP name in the dictionary:
(cdr (assoc 3 (dictsearch (namedobjdict) "ACAD_GROUP")))
Any lisp routine for changing the text width of all the attributes in a block globally. I want to change it from 1.0 to 0.8. I have attached a symbol where the attritube tags will be the same.
View 2 Replies View RelatedHere's my situation:
I have a block named "WIDGET-A". And in that block are (4) attribute tags whose names are:
"ID"
"TAG01"
"TAG02"
"TAG03"
The user will be prompted to pick the value displayed at any of the "TAG##" attributes - they will select the attribute tag they want (we don't know which one it is, we just want to assign that value of the attribute tag they clicked on to a variable called "VAR2".
Now, what we also want AutoCAD to evaluate, behind the scenes, is the value of the attribute tag named "ID" which we know always exists in the block and then assign that value to a variable called "VAR1".
Is there a way for AutoCAD to do this all from only a single user pick on top of an attribute value, in a block whose name isn't always going to be 'WIDGET-A' either.... But the block, whatever it's name, will always have the attribute tag "ID" with a value in it, and we always want to capture the value of whatever attribute tag within the block that the user clicked on.
I have a lot of attribute blocks in my drawing which i want to move them one by one
so , here is what i want to do :
I have numbers (or texts) in my work area and this numbers also exist in my attribute blocks .. i wanna move my attribute blocks with tag name value reference to my specify area if tag name values are matching with text or numbers in this area .. every block will check my selected tag string and will be move on matching text in my work area.
I would like to create a lisp that does the following:
Update a titleblock attribute with a $variable.
The titleblockname is variable / not static.
The attribute is not variable / Static, DW_SCALE
The titleblock is always places on the same layer, BL$4----
The (custom)-plotscale is stored in the $var "gvpsc".
I've tried to ajust the following lisp code. But I couldn't extract the part I need.
The problem is, the code checks all the layouts and updates all the titlblocks one by one.
Truely a good code.
The only problem is, I don't have multiple layouts and I have a variable titleblock name.
Here is to code i've tried to convert to something I could use.
(defun C:UPD-DPC () (setvar "cmdecho" 0) (setq blkname "DPC-STEMPEL");(getstring "
Enter the name of block to update: ")) (setq att1 "DW_DATE");(strcase(getstring "
Enter the name of the attribute to change: "))) (setq newatt (strcase(getstring "
[Code] ....
Is there a way (or a “trick”) to have one attribute at two different locations inside of one block (I want to avoid filling in the same text twice when this block is inserted or edited)?
View 9 Replies View RelatedI need a lisp sub-function that can empty all attributes of a specified dynamic block. The idea being that the specified block contains data that changes often and in order to repopulate the block's attributes with new data to replace the old I wish to just blank out the old data first, because it's possible that the new data may not utilize as many attributes and all of the old data must be removed.
The thing is the block I'm after is on several layouts, CTABs and they all need to be wiped clean.
I have a series of blocks that I need to insert into a drawing, maybe 100-200 times and then change one of the 6 attributes by an increment of 1.
I've looked at some of the older posts and have not been able to do this. Is it possible to take the tag regerence, in this case OUTLET_REF and automatically add 1 to it when the symbol is inserted.
Can this be done using Diesel or with a bit of lisp?
i have a for example a block with one attribute and would like add a new attribute. i´m trying to read the current block and redefine - it comes a new attribute in propertieswindow but not graphical.
(defun c:ent () (setq bn (getstring "
give a block name ")) (setq bez (getstring "
give a attribut name ")) (entmake (list (cons 0 "BLOCK")(list 10 0 0 0)(cons 2 bn)(cons 70 2))) (setq fe (entmakex (list (cons 0 "CIRCLE") (cons 8 "0") (cons 10 '(0 0 0)) (cons 40 1)))) (entmake (list (cons 0 "ATTDEF") (cons 8 "0") (cons 10 '(0 0 0)) (cons 11 '(0 0 0)) (cons 40 1) (cons 1 bez) (cons 3 "TOP") (cons 2 "NAME") (cons 70 0) (cons 73 0) (cons 50 0) (cons 41 1) (cons 51 0) (cons 7 "STANDARD") (cons 71 0) (cons 72 0) (cons 210 (list 0 0 1)) (cons 74 0) (cons 62 256) (cons 39 0) (cons 6 "BYLAYER"))) (entmake (list (cons 0 "ENDBLK")(cons 8 "0"))) (entdel fe) (entmake (list (cons 0 "INSERT")(cons 2 bn)(cons 10 '(0 0 0))(cons 66 1) (cons 62 256) (cons 39 0) (cons 6 "BYLAYER"))) (entmake (list (cons 0
[code]....
I'm trying to find a routine that will look for ABC block and updates its NUM attributes depending on what's shown in the DESC attribute. There are about 5 of these ABC blocks in a drawing. Block ABC has 2 sets of attributes: DESC and NUM.
When run, it will look at the value of tag DESC, if it contains value XXX, then it will change the NUM value to 1111. And if DESC contains value YYY, then it will change the NUM value to 2222.
I'm looking for a lisp routine that i can globally change the text height and width factor of a particular block attribute. The name of the attribute tag is "TAG". I would like to be able to select all the blocks that i need to edit and then specify what text height and width factor i want to change to.
View 9 Replies View Relatedi'm relatively new to lisp routines. I've been trying to create a routine that will create a custom block with attribute with an option to select which drawing border size is being used. This is what i've got so far;
(defun c:NEW_REV_NOTE ()
(PRINC "
Drawing Size:")
(SETQ Paper_Size (GETSTRING "
[A1/A3] <A1>: "))
(IF (= Paper_Size "A1")
[code]....
I'm going wrong at the moment I get an error message when I try to load the file "; error: syntax error".
