AutoCAD Inventor :: Sheet Metal Bend Relief?
Apr 16, 2013
Ive imported a CATIA part and I'm trying to redraw it in Inventor. I have the main panels and bend rads in but I cannot for the life of me work out how to model the bend reliefs so they are similar to the ones on CATIA. The purpose of all of this is too reduce the bend reliefs that CATIA has produced even further.
Ive added both the original dumb solid from catia and the new inventor model to an assembly and contrained them in line so hopefully you see what I mean.
View 6 Replies
ADVERTISEMENT
Dec 20, 2012
I have a sheet metal door with a little bracket that gets welded to the inside lip through a cut-out in the face of the door. (see assembly)
I can't get the cut-out to line up flush with the inside lip of the door, as that is where the brackets gets welded to. the current aseembly is set-up the way I want, but I can't get a flat pattern on the door, becasue of the cut going across the bend.
I have checked off the "cut across bend" in the cut dialogue box, but this leaves a small (~1/32) lip in the cut-out and runs interference in the placement of the bracket.
Inventor Pro Suite 2013
Sean Farr
Product Designer at TESInc.ca
Inventor Professional 2014-Update 2 - AutoCAD Electrical 2014
Win7-x64 | ASUS P8Z77-V | i7 3770 -3.4 GHz | 32GB RAM |
240GB SSD | nVidia GTX 670 4GB - 320.49
View 2 Replies
View Related
Jan 16, 2012
I want to create this shape, I try to use the loft command to get the result but after I get the shape I can't do the shape on the top of the loft shape, I need to do the cut across bend. show the correct step to get this shape? Attach is the .jpg file of the part.
View 4 Replies
View Related
Apr 14, 2012
How to create this bend using the sheet metal mode. The bend should be a certain radius on the top (see attachments).
View 3 Replies
View Related
Apr 23, 2012
I have the following sheet metal application: A flat bar steel (strip) 40x1mm is bent and twisted around three cylinders. In our process, the strip is running in loop around these cylinders, like a conveyor-belt. At first, it is bent around the first cylinder (blue). Then, it is bent and twisted around the second cylinder (green). Between these cylinders, a flat part is modelled so that the strip will be bent upwards (twisted) around the next cylinder. The same is done between cylinder two and three. In praxis, when I bend the strip, no flat part will be present, because the strip is quite stiff, as it is spring steel. In my Inventor model, no stiffness of the strip is taken into consideration.
I am looking for a better way to model this strip, where stiffness of the material is taken into consideration.
View 1 Replies
View Related
Dec 31, 2013
I have a large number of parts that are set with a "2mm" Bend Radius.
1. I wish to change it to "1.5mm" but manually takes time . Ways to automatize this?
2. What Bend Radius is recommended to be used for steel sheets (1.5 ; 2; 4; 5 mm).
View 5 Replies
View Related
Dec 26, 2012
Can a curved section with bend be applied to sheet metal part.I make extrusion for easier clarity.I am wanting to place the curved section (extrusion for demonstration purpose) with bend in sheet metal part but all created in the sheet metal environment.
View 6 Replies
View Related
Mar 13, 2012
I wrote an app some time ago that swaps out user parameters that drive sheet metal thickness and bend radius.
it appears to work about 60% of the time when it doesn't it does not give any warning but even though the FX table shows the new user parameters driving thickness and bend radius the "sheet metal defaults dialog" thickness input box is grayed out and shows no value what so ever. Clicking the Edit Sheet metal rule to display the "Style and Standard Edtior" the Thickness and Bendradius still show the Old userparameters. See attached Pic.
I am setting the parameters as follows.
Replaced "Chan_Th" with "chn_thk" in FX Userparameters
then...
[Code]
oSheetMetalCompDef.UseSheetMetalStyleMaterial = True oSheetMetalCompDef.ActiveSheetMetalStyle.Thickness = sThick
[/Code]
As you can see FX reports the change but sheet metal settings does not.
This code appears to work or not at random.
View 7 Replies
View Related
Jan 23, 2013
Trying to create a strength bead on a sheet metal part.
View 1 Replies
View Related
Jul 17, 2013
I want to connect two sheet metal faces with a bend. Bend works if two parallel edges are selected. Is there a way to connect two faces with a bend if the two edges are not parallel?
View 5 Replies
View Related
Nov 9, 2013
I created a solid, shelled it, and then converted to sheet metal. I am now trying to indentify the bends but I am getting the error: Bend 1: Could not build this Bend; No matching faces found.
View 5 Replies
View Related
Nov 22, 2013
How do we change sheet metal parts material, thickness Bend Radii from an assembly in groups.
View 3 Replies
View Related
Apr 3, 2013
I have a structrual rectangular tube as shown in the picture below. I need to fold the four flanges inward to create a sort of point or pyramid.
View 9 Replies
View Related
Sep 12, 2013
A collegue asked me about this as he has been given a part to model and the details are for the flat sheet not the finished model. Is this possible in 'sheet metal'? I had a quick play but couldn't work it out. Im used to creating the finished part and 'un-folding' to get the flat pattern.Detail supplied below.
View 4 Replies
View Related
Jul 14, 2012
I just what to cut a sheet metal,
and I don't know how (see in Capture.JPG where i what to cut, and test.iam what I what to cut).
Where is the icon "project the geometry" ?
View 6 Replies
View Related
Jan 6, 2012
I need a flat pattern for this part but it seems impossible. STEP 2 illustrate the desirable result.
View 7 Replies
View Related
Aug 21, 2013
Working with sheet metal and laying out a pattern for the cnc and was wondering if there is a way to imprint an extrusion onto the surface instead of cutting it. Mainly this will be used for a marking tool so the line type or layer would need to be different.
View 5 Replies
View Related
Aug 8, 2013
I am working on a bin type unit, and am having trouble creating a flange, I am creating the bin in the final product stage, then I will separate into manufacturer components. I am having trouble adding this flange around the top 4 edges of the bin. I need the four corners to meet on a miter 45. I will then rip down each seam and have 4 separate panels.
Is this a bad workflow? Is there a better route? I attached the part in Inventor 2013 format,
View 8 Replies
View Related
Dec 18, 2013
Attached are two sheet metal parts that we need to unfold and make them flat for a drawing. We cannot seem to capture the reference A or reference B planes asked for by the unfold command.
View 3 Replies
View Related
Jan 27, 2012
Is there a way to get the appearance of perforation on a sheet metal tube without having to create each and every hole? Looking for an appearance to drag onto the surface. Kind of like when you make a part look like it is made of brick. It being just an image on the model surface.
View 9 Replies
View Related
Oct 20, 2011
Very thin gauge aluminum sheets with a composite sandwiched between them.
The challenge is, the panels are relatively thick, 3mm or 4mm, but a router is used on the fold lines before bending to cut through all but the outer aluminum. This makes for a very tight bend radius.
So, thick 3 layer material, tight bend with mitered corners. Can Inventor's sheet metal tools handle this?
View 5 Replies
View Related
Apr 17, 2013
Can this part be made with sheet metal tools...it will be made from aluminum. I attach the shape made with standard tools and the sheet metal attempt.......how do add the sides in sheet metal.
View 4 Replies
View Related
Sep 6, 2012
how incredible it is that Inventor still does not have a functional normal cut option for sheet metal like Solidworks and Solidedge have long had and I agree. I realize that there are the standard workflows like using derive and thicken to get around this problem. However, for those interested, there is a way to make a normal cut (for laser/cnc) directly in the sheet metal part in many cases. It involves using a sketch to split a face and then using the resulting profile for a thicker/cut feature. I'm always interested in any other methods out there for obtaining normal cuts in complex sheet metal (for a clean dxf export). By the way, Autodesk, do you actually not have any plans of ever adding functionality in this area?
View 4 Replies
View Related
Feb 3, 2012
what's the best way to make tabs on a rolled round ring. I got it done using unfold/refold option but I can not get sheet metal flat.
View 4 Replies
View Related
Jul 3, 2012
I am using IV ultimate 2013
just found about this add-in:[URL]
But its not working for me:
I ran the installer, created a sheet metal part and hit rebuild all, it did not create any proeprties, also tried to manually create the properteis then hit rebuild, no go.
I also did a search on my hardrive for the ApplicationPlugins, and placed the sheet metal folder in all of them(there were 3) tried again noto.
The add-in also does not appear in the add-in manager.
Or is there different what to get the flat pattern dimensions in 2013
View 9 Replies
View Related
Dec 7, 2012
I have just modelled a part with some faces and tried to convert to sheet metal to have inventor make the bends between the faces. However when trying to convert to sheet metal i get the following error message (Autodesk Inventor Professional Tip) - "This model cannot be converted to Sheet Metal because it contains features that have created multiple bodies. In order to convert to Sheet Metal these features must first be removed."
As the picture show the part only has 1 solid. Even when deleting all features except the "base" face I get the same error message or Tip as Inventor calls it.
View 5 Replies
View Related
Oct 5, 2007
How can I create a sheet metal jog? Like the attached. I used a contor flange to creat this one, but I have to add a jog to an existing part and don't want to have to totally redraw it just to get the jog. I'm hoping you can add it like you can a flange.
View 9 Replies
View Related
Nov 13, 2011
I was designing a part which consisted in a circular sheet metal part with a hole in the center, and a bent rectangular radii-oriented section. The second feature is the one I want to give focus in this thread.
Take a circular sheet metal with a diameter of 30 mm and a thickness of 1 mm. Now, to achieve the bent section one would perform - in a workshop or any other equivalent - two parallel slices of about 5 mm in length with a distance from each other of 4 mm. The slice would start in the circumference and end somewhere nearer to the center of the disc, but not parallel to a radius (since its parallel to another slice 4 mm apart as said before). After the slicing was done, one would bend the section between the slices 90 degrees to any of the sides.
Now, in Inventor I couldn't find a way to do this. I couldn't just slice a line through the disc. I worked it around by cutting rectangles of 0.2 mm in width and with the length of the desired slices, and then using the folding command to bend it 90 degrees. Is it possible to perform this so called slices?
View 2 Replies
View Related
Sep 3, 2013
I made a part in sheet metal and used the Cut tool for cut-outs...i tried by using flatten Patern,draw sketch but this did not cut part...is there a more better way of making these cuts?
INV 2013
View 2 Replies
View Related
Apr 30, 2013
I have been trying to work out how to make interlocking joints in sheet metal parts. The attached screen shot is the only way I have found to do it in Inventor, but it is a cheat. One of the flanges is a 85˚ bend because if it were 90˚ it would give an error "Flange Body intersects with existing body or self intersects."
View 4 Replies
View Related
May 7, 2012
I have setup all our Sheet Metal Rules to be all of our stocked in house sheet metals. The sheet metal rules are named like:
ALUM 5052 H32 1/2" (Part Number)
ST STEEL T304 3/8" (Part Number)
STEEL 44W 1/8" (Part Number)
etc.
And each rule has the proper thickness, material, and some standardized bend radius's. I've done this to introduce more uniformity in our designs, and to also allow the designer to put as much information into the model as possible, so that if someone else does the drawings, there is no question as to which material is used.
I now want to bring in the Sheet Metal Rule name into the drawing automatically. I can't seem to find a way to reference the Sheet Metal Rule directly from the drawing. What I need to do is pick a standard field in the i Properties (I used Stock Number), and put in =<Sheet Metal Rule> so that now the Stock Number references the Sheet Metal Rule, and then in the drawing I can just reference the Stock Number, and it will come in.
I don't like having to use the Stock Number as a middle man though, as none of our existing models are setup like this. Is it possible to reference Sheet Metal Rule in the drawing without having to use another field as a placeholder for the information?
View 7 Replies
View Related
