AutoCAD Inventor :: Setting Uppercase Letter In IProperties
May 3, 2012How to set or force i Properties always to uppercase letters in Inventor 2010 or higher?
View 3 Replies
ADVERTISEMENT
AutoCAD Inventor :: ILogic Code Part Iproperties To Custom Iproperties
Sep 19, 2013I was looking for some iLogic Code for Inventor 2013 that would cycle through all the parts in an assembly grabbing the quantity of each part and setting it equal to the custom property "Qty" of each part.
Having a little trouble creating the for each loop and setting reference to each part without referencing each part by specific name.
Photoshop Elements :: Different Blocks Of Text And Colors Changing From Letter To Letter Within Words
Jun 26, 2013I have a project with many different blocks of text, and colors changing from letter to letter within words.
How do I identify what any given color is?
When I click on a letter, it shows me a visual block of the color, but doesn't tell me what the corresponding color number is.
Problem being, if I see one letter and want to take its color to use it elsewhere, I have no way of knowing what that color is.
AutoCad :: How To Turn Text To UpperCase
Feb 15, 2007I have got a drawing that contains lots of text. The problem is that i need to turn them into UpperCase text and there are heaps of them. It'd be time consuming if i do it one by one. wonder if there're any easier way of doing this?
I'm using autocad 2005
AutoCAD Inventor :: Spell Each Letter Of Word On VBA
Apr 4, 2013I want to create a label with a textbox (myabe) in which i will write by my keyboard a word.After that i want to press the "Enter" button and the programm do this simple thing...."SPELL" each letter of my word, an activate a specific command each time and in my case a specific RULE from iLogic.
For example, i wanna whrite my name.....NIKOS....and after pressing the ENTER button, firstly my programm read the letter "N" and trigger the Rule1....After a specific time (that i want to defined by myself, probably with a timer) the programm read the right next letter which is "I" and activate the next Rule2...Until the last letter where it will end.
I should note here that i already have the code that i can calling as Rule i wish.But i dont know how to use it for my job....
The code is the following...
Dim iLogicAuto As Object
Set iLogicAuto = GetiLogicAddin(ThisApplication)
If (iLogicAuto Is Nothing) Then Exit Sub
Dim doc As Document
Set doc = ThisApplication.ActiveDocument
[Code] .......
AutoCAD Inventor :: How To Convert Letter To Number In ILogic
Jun 27, 2012I am making a iPart with iLogic. I need a function to convert letter to number or convert number to letter as we did in VB for Excel.
For example: Char(65)="A"; CODE("A")=65, and so on.
AutoCAD Inventor :: Set IProperties Upon New / Save
Apr 10, 2013I want to make popup the i properties windows to fill or change in 2 ways:
» when creating a new ipt, iam and idw
» just before saving all 3
the properties I want to validate are
- the title not filled
- if there is more than one line filled in comments
AutoCAD Inventor :: IProperties - Opening Using VBA
Mar 7, 2013I am opening, using VBA, the iProperties "Pop Up" box, using the following code....
ThisApplication.CommandManager.ControlDefinitions.Item("AppiPropertiesWrapperCmd").Execute
If it is possible to open the iProperties "Pop Up" box at a specific Tab, for example, "Physical" or "Status" etc?
AutoCAD Inventor :: Part IProperties From IDW
Dec 5, 2012Is there any way to add an "iProperties" item to the context menu in the drawing environment, so that I can select a part on the drawing and access its iProperties, instead of having to "Open, edit iProp, Close," for each individual part? - Using Autodesk Inventor Professional 2012
View 2 Replies View RelatedAutoCAD Inventor :: Same Part Different IProperties
Jul 3, 2012Any way of having 2 files with different file name but identical designs what automatic updates the other one?
I need the same valve design with different materials, stock number and part names but I would like to make sure that both files are always updated to latest rev. Without having to remember to do it my self every time.
We are using vault?
AutoCAD Inventor :: IProperties Dialogue Box
Jul 9, 2012Is it possible to create a new TAB in the standard iProperties dialogue box for Inventor Models and Drawings? I want a completely new TAB to hold unique company information fields without having to create Custom Property fields.
View 2 Replies View RelatedAutoCAD Inventor :: How To Delete Value In IProperties Using VBA
Aug 26, 2013While in assembly, i would like to select a subpart and be able to clear or delete the value of ex description without opening the part file.
I can delete properties in custom prop but i cant do it in description....
I've use design tracking properties but to no avail....
AutoCAD Inventor :: Retrieve IProperties From IDW To IPT
Dec 20, 2013In the past we filled in our changes, we did on the part, in the iProperties of the IDW. In the IDW we use some Custom iProperties for this. That's not usefull because you want this data in the 3D-model. Now I have written some code to automate this, which works really great. This code works in the IPT as well as the IDW. But what I want to achieve is: When my IPT is the active document, I want to read out the iProperties from the IDW to check if there is already filled some of these properties, because I have to deal with 'old' documents as well.
So my basis question is: How can I read out iProperties from an IDW into the IPT. I have found lots of solutions which go the opposite direction, IPT -> IDW. I want IDW -> IPT.
AutoCAD Inventor :: How To Get Area In IProperties
Jul 26, 2010I want to get out the Area in Physical Tab in i Properties, after that, I will show it out in drawing by add general notes
This is my program:
[code]
.....................
Dim oBlockPart As PartDocument
oBlockPart = mApp.ActiveEditDocument
..................
Dim oGeneralNotes As GeneralNotes
AutoCAD Inventor :: Add To The IProperties Dialog?
Aug 9, 2012I need to add a "Gauge" value to show up in the iProperties dialog box under the Project tab, but I don't know how or if I can.
View 9 Replies View RelatedAutoCAD Inventor :: IProperties And BOM Customization
Aug 15, 2012I am now looking to work with custom iProperties that will populate our company's new BOM standard. I have not done much with regards to customizing a BOM (I've always used the generic fields). Now my boss has come to me and wants to use the following headings for our BOM....
REF ID, QTY. , DESCRIPTION, SHAPE, SIZE, LENGTH, MASS, TOTAL LENGTH, TOTAL MASS, COMMENTS, REF. DWG.
REV., REV. DATE
While I understand some of these fields will require the user to manually type information in (Comments and Ref. Dwg.) The others, from my understanding, can come straight from iProperties or Parameters. I am running INV Pro 2013.
AutoCAD Inventor :: Sync IDW IProperties With IPT?
Apr 7, 2009i would like to be able to make a change in iProperties ( part #, description, stock number), and then automate/sync that change to the .idw of that part/project after the .idw is created.
is this possible? do i just need to fill out the iProperties BEFORE i make the .idw,
I really hope this is possible, we are going back and reorganizing all of our previous work and putting everything in vault now.
AutoCAD Inventor :: Using Parameter In IProperties
Jan 6, 2014Sometimes I change the dimensions of a material I use but then I have to open Iproperties and change the description by hand. This can create problems as you can understand especially when I forget to update the Iproperties.
Then I had the thought to automate it. Lets take a steel bar as example. I have thickness and width as parameter, both are exported and available under IProperties/Custom. But they show as 200 mm and 10 mm. I would like to loose the units. I tried also UL but then it reads 200 ul and 10 ul.
What I like to get are just the numbers, no units. I like to use it to create this "steel bar 200x10" where the 200 and the 10 are linked to the Parameter and will change when I change the dimensions av the steel bar.
AutoCAD Inventor :: IProperties Location Using VBA
Dec 22, 2012How can I get the "Location" iProperty using Inventors VBA?
Please see the attached picture!
I am using the following code to get other iProperties, thus.....
Set oStockNumberProperty = oCompDef.Document.PropertySets.Item("Design Tracking Properties").Item("Stock Number")
StockNumber = Trim(oStockNumberProperty.Value)
This works OK.
AutoCAD Inventor :: Section Feature In Drawing (Repositioning The Letter)
Aug 1, 2012When I do a section in a drawing, i always have to replace the letter a end of arrow.
Is there a way so the letters will always be at end of arrow?
AutoCAD Inventor :: Parameter Naming - Single Letter Designations
Mar 21, 2013I have a question regarding parameter naming. A good number of my parts are made to standards with different size classes. ( AS, MS, JIS etc )
In these parts the dimensions are given with a single letter designation ( A, B, C etc ). Unfortunately, Inventor does not allow some ( a good number actually ) letters to be used as a single digit parameter. Until now I've been using "DimA", "DimB" etc. but I'd like to find a way to use just A, B, C .... just as it is on the prints.
AutoCAD Inventor :: How To Export IProperties To TXT ILogic
Nov 11, 2013I would like to copy and paste all iproperties from one part to another, without retyping it all.
What i was thinking about is:
1. Exporting all iproperties to .txt
2. Run a import .txt rule to iproperties.
Is it possible? If so, How could i accomplish a task such as this?
Privacy warning: Since I live in a country that has traded liberty for the illusion of security, all of your posts to me are being monitored and saved by the United States Government.
AutoCAD Inventor :: Change IProperties Field Name?
Mar 12, 2013I am trying to figure out if it is possible to change the iProperties default field names. For example, in iProperties, under the Project tab, i want to change the field "Stock Number" to "Drawing Number". I know that i could create my own custom field in a seperate tab, but i think this way would have a much cleaner look and simpler workflow. If it is possible, is it something that i can incorporate into an ipt template? Or will this only change on my system?
I am working in Inventor 2012 Pro
AutoCAD Inventor :: ILogic Set Description In IProperties
Oct 18, 2013I am sure this is extremely simple to do but I am missing something. I am wanting to set the Description of a part in the Iproperties using values from the parameters. For instance, if the part has a length value of 10 and a width value of 5 I want the Description to say: 10 x 5 Floor Sheet
I cannot figure out how to extract the parameter values and place them into the iproperties. Here is what I have tried: iProperties.Value("Project", "Description")=" =<Length> x <Width> Floor Sheet"... This gives me the following result in my description: x Floor Sheet
AutoCAD Inventor :: Crashes When Trying To Open IProperties Of 1 Certain IPT
Dec 8, 2011The crash happens everytime I try to open iProperties from the .iam(Assembly) that I use it in. The only other .ipts I use in the .iam is two small rings. I can open iProperties for the .ipt if I open the .ipt for it self, thou I have .iams that use .ipts that are nearly similar to the one causing the crash, that open iProperties just fine.
View 1 Replies View RelatedAutoCAD Inventor :: Set Assembly IProperties Using ILogic
Jun 1, 2011I wish to set the properties of an assembly using i Logic. I have the values of the properties in a part that is in the assembly. I wish to pass those values from the part to the assemblies i properties. I tried using the following code, but it gives an error saying it can not find the document "MyAssy.iam"
iProperties.Value("MyAssy.iam", ThisDoc.Path, "Part Number")=AssyNo
I'm not even sure that this is the way to do, but it's the only way I could think of to try.
AutoCAD Inventor :: Export Occurrence IProperties?
May 21, 2013I would like to export the Current Offset from Parent Assembly Origin values (X Offset, Y Offset, Z Offset, X Angle, Y Angle, Z Angle) for each part in an Assembly. These values are found in each component's iProperties under the Occurrence tab.
View 9 Replies View RelatedAutoCAD Inventor :: Changing IProperties In Session?
Nov 16, 2012Using Inventor 2013. As you know it's impossible to chang iproperties values of the library parts in inventor session (for instance in asm file). The error message comes "readonly".
But when you open iproperties of the file in windows file explorer then it's possible to change iproperties values while library parts open in inventor session in asm.
Normally I copy the file location path of the library part and open this path in the windows file explorer and find the part and right-click on file and change iproperties values which I want to change stock number, part description etc...
Is it possible to create VBA code or API which can open iproperties box of the selectet part outside of the inventor session in windows file explorer?
AutoCAD Inventor :: Open IProperties Toolbox Using VBA
May 7, 2012I have written a vba macro to automatically check that the description and material properties of a ipt file are correct.
If they are not correct, eg "no description" has been entered then I need to automatically open iProperties so that the user can then input a description.
Is this possible?
AutoCAD Inventor :: Parameters In IProperties - IParts
Feb 14, 2012I need a parameter from an iPart to show up in my Parts List by using the Stock Number iProperty, then CHANGE with each variation of the iPart (PLATE BC-01, PLATE BC-02, PLATE BC-03, etc). I already have the parameter exported, named 'BOTTOM_A.' Stock number has the expression: '=1/4" HRS x <BOTTOM_A>.'
However, this only works for that particular part. The number does not change when I place a Parts List for PLATE BC-02 and PLATE BC-03. All three have the same number. I found that the number corresponds to the active part. If I double-click PLATE BC-02 in the ipt file to show it, the number for the separate Parts Lists will all correspond to PLATE BC-02.
I've attached an image of the Parts Lists after double-clicking PLATE BC-02 in PLATE BC.ipt. I can include more if needed.
AutoCAD Inventor :: ILogic Push IProperties
Apr 2, 2013I want to use i Logic to retreave or push the i Property of "Project" from my skeleton file to the rest of the parts and assemblies in the project.
View 9 Replies View Related