AutoCAD Inventor :: Perforated Metal Image Adjustment
Jul 21, 2013
Inventor 2013. Need back the old materials library - most of us have no use for the 3DS Max materials workflow - if I want a custom material for rendering, I will do it in Max/Photosop The new materials/appearnces are way too complicated and confusing.
I have a material that applies an alpha mask to simulate holes for a perforated metal pattern. When I migrated my styles and updated to new appearances, for some reason the image was resized or the mapping was changed, or something. Now my perforated metal holes are 1" in diamter instead of .074. How do I adjust the png file to accomplish this, and how do I publish this new image so it is used instead of the old one?
View 4 Replies
ADVERTISEMENT
Jul 17, 2013
An interesting problem for all you inventor users.I have a design where a tube/pipe requires a series of holes at a specific dia and triangular pitch is required to be modeled.
If one can imagine a flat piece of sheet steel ie standard perforated sheet which is then rolled to form a pipe/tube to a specific dia then this is what is required.
Is it possible to model this in inventor say as a flat sheet with given thickness and a specific no of holes at a given pitch, this then to be rolled,obviously the development of the sheet to be correct for the pipe od.ie 3.142 x dia.
Is there a function in inventor to enable this,the alternative being a very long winded method of modeling the pipe and then adding holes.
View 6 Replies
View Related
Sep 27, 2012
2013 perforated sheet material missing? Appearance missing ?C1 Inventor Professional 2013 Vault Collaboration 2013
View 1 Replies
View Related
Nov 13, 2012
I could not find Round Perforated Plate style / appearance on Autodesk Inventor 2013. Maybe it called "Perforated Metal 01 style" on previous Autodek Inventor version.
I just found Oblong Perforated Plate as attached.
View 1 Replies
View Related
Sep 5, 2007
I am working on a very large Metal Screen that is Approx. 55'-0" H x 240'-0" W.
I need to create the actual punched screen for my Revit Model Renderings and can not use a decal as an option. Each 4'x8' panel will be punched based on a Raster image that I have created an algorithm the convert the image to a Vector Autocad file so the metal fabricator can program the puncher. Every panel is different and thus can not be created and just copied over the entire screen.
The only way I have been able to attempt creating this screen hase been to Edit the profile of a wall. this method though is insanely time comsumming and not really an option, how to select all the lines brought in from cad together and edit. I have only been able to click individual lines...
I am attaching 2 DWG files, one that is off a full size portion of the screen and one that represents one panel (approx. 4' 8').
I am also attaching a RVT file that has the DWG brought in an placed on on elevation of the "wall".
View 9 Replies
View Related
Oct 28, 2011
I have a rectangular screen grab (Windows application) that I would like to simply round the corners and add a border. The image is not a photograph, but since I have Paint Shop Pro X3 and like how it works, I thought I would try it . I have spent some time trying to do this with Paint Shop Pro X3 with no luck. None of the pre-defined frames seemed to do what I need. I would also like to create a drop-shadow behind the image. how to do this or a video that I can watch. A list of steps would also be OK.
View 1 Replies
View Related
Jul 14, 2012
I just what to cut a sheet metal,
and I don't know how (see in Capture.JPG where i what to cut, and test.iam what I what to cut).
Where is the icon "project the geometry" ?
View 6 Replies
View Related
Jan 6, 2012
I need a flat pattern for this part but it seems impossible. STEP 2 illustrate the desirable result.
View 7 Replies
View Related
Aug 21, 2013
Working with sheet metal and laying out a pattern for the cnc and was wondering if there is a way to imprint an extrusion onto the surface instead of cutting it. Mainly this will be used for a marking tool so the line type or layer would need to be different.
View 5 Replies
View Related
Aug 8, 2013
I am working on a bin type unit, and am having trouble creating a flange, I am creating the bin in the final product stage, then I will separate into manufacturer components. I am having trouble adding this flange around the top 4 edges of the bin. I need the four corners to meet on a miter 45. I will then rip down each seam and have 4 separate panels.
Is this a bad workflow? Is there a better route? I attached the part in Inventor 2013 format,
View 8 Replies
View Related
Dec 18, 2013
Attached are two sheet metal parts that we need to unfold and make them flat for a drawing. We cannot seem to capture the reference A or reference B planes asked for by the unfold command.
View 3 Replies
View Related
Jan 27, 2012
Is there a way to get the appearance of perforation on a sheet metal tube without having to create each and every hole? Looking for an appearance to drag onto the surface. Kind of like when you make a part look like it is made of brick. It being just an image on the model surface.
View 9 Replies
View Related
Oct 20, 2011
Very thin gauge aluminum sheets with a composite sandwiched between them.
The challenge is, the panels are relatively thick, 3mm or 4mm, but a router is used on the fold lines before bending to cut through all but the outer aluminum. This makes for a very tight bend radius.
So, thick 3 layer material, tight bend with mitered corners. Can Inventor's sheet metal tools handle this?
View 5 Replies
View Related
Apr 17, 2013
Can this part be made with sheet metal tools...it will be made from aluminum. I attach the shape made with standard tools and the sheet metal attempt.......how do add the sides in sheet metal.
View 4 Replies
View Related
Sep 6, 2012
how incredible it is that Inventor still does not have a functional normal cut option for sheet metal like Solidworks and Solidedge have long had and I agree. I realize that there are the standard workflows like using derive and thicken to get around this problem. However, for those interested, there is a way to make a normal cut (for laser/cnc) directly in the sheet metal part in many cases. It involves using a sketch to split a face and then using the resulting profile for a thicker/cut feature. I'm always interested in any other methods out there for obtaining normal cuts in complex sheet metal (for a clean dxf export). By the way, Autodesk, do you actually not have any plans of ever adding functionality in this area?
View 4 Replies
View Related
Feb 3, 2012
what's the best way to make tabs on a rolled round ring. I got it done using unfold/refold option but I can not get sheet metal flat.
View 4 Replies
View Related
Jul 3, 2012
I am using IV ultimate 2013
just found about this add-in:[URL]
But its not working for me:
I ran the installer, created a sheet metal part and hit rebuild all, it did not create any proeprties, also tried to manually create the properteis then hit rebuild, no go.
I also did a search on my hardrive for the ApplicationPlugins, and placed the sheet metal folder in all of them(there were 3) tried again noto.
The add-in also does not appear in the add-in manager.
Or is there different what to get the flat pattern dimensions in 2013
View 9 Replies
View Related
Dec 7, 2012
I have just modelled a part with some faces and tried to convert to sheet metal to have inventor make the bends between the faces. However when trying to convert to sheet metal i get the following error message (Autodesk Inventor Professional Tip) - "This model cannot be converted to Sheet Metal because it contains features that have created multiple bodies. In order to convert to Sheet Metal these features must first be removed."
As the picture show the part only has 1 solid. Even when deleting all features except the "base" face I get the same error message or Tip as Inventor calls it.
View 5 Replies
View Related
Dec 20, 2012
I have a sheet metal door with a little bracket that gets welded to the inside lip through a cut-out in the face of the door. (see assembly)
I can't get the cut-out to line up flush with the inside lip of the door, as that is where the brackets gets welded to. the current aseembly is set-up the way I want, but I can't get a flat pattern on the door, becasue of the cut going across the bend.
I have checked off the "cut across bend" in the cut dialogue box, but this leaves a small (~1/32) lip in the cut-out and runs interference in the placement of the bracket.
Inventor Pro Suite 2013
Sean Farr
Product Designer at TESInc.ca
Inventor Professional 2014-Update 2 - AutoCAD Electrical 2014
Win7-x64 | ASUS P8Z77-V | i7 3770 -3.4 GHz | 32GB RAM |
240GB SSD | nVidia GTX 670 4GB - 320.49
View 2 Replies
View Related
Oct 5, 2007
How can I create a sheet metal jog? Like the attached. I used a contor flange to creat this one, but I have to add a jog to an existing part and don't want to have to totally redraw it just to get the jog. I'm hoping you can add it like you can a flange.
View 9 Replies
View Related
Nov 13, 2011
I was designing a part which consisted in a circular sheet metal part with a hole in the center, and a bent rectangular radii-oriented section. The second feature is the one I want to give focus in this thread.
Take a circular sheet metal with a diameter of 30 mm and a thickness of 1 mm. Now, to achieve the bent section one would perform - in a workshop or any other equivalent - two parallel slices of about 5 mm in length with a distance from each other of 4 mm. The slice would start in the circumference and end somewhere nearer to the center of the disc, but not parallel to a radius (since its parallel to another slice 4 mm apart as said before). After the slicing was done, one would bend the section between the slices 90 degrees to any of the sides.
Now, in Inventor I couldn't find a way to do this. I couldn't just slice a line through the disc. I worked it around by cutting rectangles of 0.2 mm in width and with the length of the desired slices, and then using the folding command to bend it 90 degrees. Is it possible to perform this so called slices?
View 2 Replies
View Related
Jun 19, 2013
Ive made a little mistake while making a content center part.
Is there anyway to edit the Ipart that i published into the content center? there is a custom property in there that i would like to have deleted. Inventor 2013
View 1 Replies
View Related
Aug 29, 2008
I've been working with an image with about a half dozen layers. Some of these are Curves adjustment layers, I've also added a layer, using Soft Light mode, and then paint either in black or white to dodge and burn the image. At some point, when I started painting in this layer, or in the masks of the adjusment layers, instead of seeing my results in the image, I'm see red brush strokes being added to the image. It looks like the red you get when you toggle the "" key and you're seeing what's in the layer and the masks in rubylith.
Also, when I select a layer, it turns light gray, not blue, as with other images.
View 1 Replies
View Related
Oct 31, 2012
Using bolted connection, I want to place a bolt through 3 sheets of metal. The first 2 sheets i want it to automatically place a slightly larger hole (which it does) but I want the 3rd sheet to be threaded so the bolt thread and hole thread are the same size.
View 3 Replies
View Related
Sep 3, 2013
I made a part in sheet metal and used the Cut tool for cut-outs...i tried by using flatten Patern,draw sketch but this did not cut part...is there a more better way of making these cuts?
INV 2013
View 2 Replies
View Related
Apr 30, 2013
I have been trying to work out how to make interlocking joints in sheet metal parts. The attached screen shot is the only way I have found to do it in Inventor, but it is a cheat. One of the flanges is a 85˚ bend because if it were 90˚ it would give an error "Flange Body intersects with existing body or self intersects."
View 4 Replies
View Related
May 7, 2012
I have setup all our Sheet Metal Rules to be all of our stocked in house sheet metals. The sheet metal rules are named like:
ALUM 5052 H32 1/2" (Part Number)
ST STEEL T304 3/8" (Part Number)
STEEL 44W 1/8" (Part Number)
etc.
And each rule has the proper thickness, material, and some standardized bend radius's. I've done this to introduce more uniformity in our designs, and to also allow the designer to put as much information into the model as possible, so that if someone else does the drawings, there is no question as to which material is used.
I now want to bring in the Sheet Metal Rule name into the drawing automatically. I can't seem to find a way to reference the Sheet Metal Rule directly from the drawing. What I need to do is pick a standard field in the i Properties (I used Stock Number), and put in =<Sheet Metal Rule> so that now the Stock Number references the Sheet Metal Rule, and then in the drawing I can just reference the Stock Number, and it will come in.
I don't like having to use the Stock Number as a middle man though, as none of our existing models are setup like this. Is it possible to reference Sheet Metal Rule in the drawing without having to use another field as a placeholder for the information?
View 7 Replies
View Related
Aug 2, 2012
I recently had an issue in adding flanges to a sheet metal part. The thread for that can be seen here:
[URL].......
The problem I am having now is with the size of the part. I need the linear distance from the bottom edge of a flange to match the inner diameter of my part. As you can see, this is not the case as it stands right now.
View 5 Replies
View Related
Oct 24, 2012
I am looking for a solid way of finding the Thickness parameter of a sheet metal part. I have tried two ways so far:
1. oCompDef.Parameters.Item(Thickness)
This works but if Inventor is installed with a different language pack like German for instance then it fails
2. oCompDef.Parameters.Item(1).Value
This also works but if the user started the part with a normal part template and then converts the part to a sheet metal part down the line, then this method fails.
View 1 Replies
View Related
Sep 11, 2013
Is there a reason a sheet metal "cut" isn't an option for the automated centerlines tool? Am I overlooking something? When I make holes in sheet metal parts, I draw the circle then "cut" it into the sheet metal. For some reason I can't find how to give those automatic centerlines on drawings.
View 6 Replies
View Related
Jan 20, 2012
I am trying to make an angled tray in sheet metal by am having some trouble getting it to work out. I was unable to find an example of this type anywhere. I tried doing it as a sheet metal part first then gave up, created a standard part and shelled it. My problem is ripping the corners.
View 8 Replies
View Related
