i put a pen tool path on a new layer, selected it, tried stroke effect and it doesnt work. also, when i make a pen tool line, when i hit "make selection" it completes the line into a shape which i dont want.
View 2 RepliesHow to make something like this logo: [URL]... (also attached below in case link d/n work)
I tried using the line selection tool to create a stroke path in the shape of the design I wanted, but I can't get it to emulate this brush (it always just fades to opaque instead of tapering to a point).
This morning, my Selection Tool (the filled-in arrow) is acting like a Direct Selection Tool (the hollow arrow), but only when I click and drag on a group. It ends up select the anchors within the group rather than the whole group itself.
I've checked my preferences, quit and relaunched Illustrator a few times, and nothing seems to fix it. The problem briefly went away a few minutes ago, but came back when I quit and relaunched for good measure.
It's happening in Illustrator CS 5.1. I have CS6, and that version works fine, but I'm waiting on some plugins to be updated for it, so I'd like to use CS 5.1. I'm also running the latest Suitcase Fusion 4.
Using the selection tool i should be able tp reduce or shrink the size of the box or an image as a whole without changing the format. Iam not able to do that. I think i disabled something in my illustrator.
View 2 Replies View RelatedI have been continually annoyed, when creating a vector mask-heavy document, with trying to select vector mask points by dragging a rectangle only to find that it instead selects a layer higher up which has a larger vector mask.
The only workaround is to manually select the points of my mask or to drag a rectangle from outside the canvas, meaning I have to zoom out or scroll to the edge - sometimes annoying if I am zoomed in quite far.
I know that the move tool can be set to automatically select a layer, depending on what part of the image is clicked, but why is there not an option to turn this off for vector editing?
If you look closely in the attached picture, there is a spot of light blue on the player's helmet, that looks like a mistake (think it should look like the grass behind it)...though it actually may be part of his helmet.
Regardless, I'd like to take it out. My idea was to select the blue with the quick selection tool, then bring that selection out to the grass, select the grass with that size/shape of selection, copy/paste and then bring the grass selection into the blue part so it looks like grass in what was the blue part.
The problem is I don't seem to be able to move the selection without taking the blue with it (so it's not an empty selection and therefore can't select a piece of the grass.)
is it possible to convert the path of a selection into a stroke?
View 3 Replies View RelatedI love drawing in Photoshop. But there is one thing that Sketchbook Pro does better that causes me to start a new project there every time. Quickly I get frustrated at the limitations of the program and the poor handling of keyboard shortcut options...Why do I start in SbP? The adjustable rulers (linear, elliptical)!
I WISH that Adobe would buy, beg, borrow, or steal this functionality from Autodesk. They are so easy to adjust, reposition, replicate, etc.
I know that I can create a selection with the marquee, lasso and magic wand tools. I know I can add a "stroke" effect to the layer. I know I can add a stroke that supposedly borrows the brush settings to a selection... But, I want to be able to "DRAW" along that path, utilizing the brush settings (like Transfer) to suit the stylistic needs of the project.
why is it when making a selection with Magic wand I can not stroke it,I need to switch tools to get it done.
View 8 Replies View Relatedin control bar, far left color pull down, I can change fill but AI will not "let" me select the stroke to change that. Is there a trick AI now requires?
Used to be X would pick the other one; if fill was front, X would make Stroke be front and vice versa.
why I can't stroke a selection after rotating it? The steps to reproduce this problem are simple:
1. Make any selection (e.g. a rectangle)
2. Click "Edit", and note that "Stroke selection" is not greyed out
3. Use the "rotate" tool on the selection. Click the selection, and specify any angle.
4. After the selection has been rotated, click "Edit" again, and note that "Stroke selection" is greyed out and unusable.
I'm using Gimp 2.8.4.
I made a selection with the Freehand-Tools and I need to make a Stroke in the selection line! How can I do this?
View 2 Replies View RelatedI started using PS CS4 demo and when I use the pen tool now to do selections, the stroke is very thin and light. You cannot see it as well in older PS versions. I have CS2 and the pen stroke is naturally easier to see. I cannot find anyway to darken the pen path stroke. Has anyone else noticed that the pen path is a lighter thinner gray path line than normal and how to make it easier to see?
View 6 Replies View RelatedI opened Photoshop just now and found out that, while using pen tool, the Stroke color & its size isn't working at all. I cannot select them, even hovering don't work at all. It's totally inactive. Yesterday it's working fine, but today it's not.
View 8 Replies View RelatedIm trying to draw frames with feathered corners using strokes, its supposed to be a solid black line 2px thick it works sometimes but not others. What I end up with is a blurred edge, almost like it's using a spray which is not at all what I want, have tried changing various settings but its still the same.
View 7 Replies View RelatedI'm working on a lj mood theme and I learned how to create round corners - basically I create a new tranparent image, go to modify - > smooth (5px) and then paste the original image. It works fine!, until I try to add a border using the stroke tool - the corners don't get the border, as you can seehere. I really don't know what I'm doing wrong, if it's a setting or what. I've tried several blending modes, all locations (inside, center, outside), preserve transparency, nothing works. Of course, I'm completely challenged when it comes to photoshop, so I could really use your help on this one.
View 3 Replies View Relatedwhen I'm trying to stroke a path with smudge tool, it works fine until I select simulate pressure in dialog box. it's strange because I saw it working fine. my friend use all the time. the only difference is he uses a macintosh and I use a windows. but as I see it, there is no way that different OS can be a reason for a problem.
View 3 Replies View RelatedWhen I use the square selection tool, the selection edges are rounded rather than square. I can't remember how to rset this.
How do you make the edges square by default?
I draw a line with the pen tool, right click and then 'stroke' the pen line with a brush (for example). I imagine I've done this successfully thousands of times but for some reason it just isn't working today (or yesterday actually!). When I right click then go down to 'stroke' nothing happens at all.
However it does work if I go into the 'paths' palette, right click on 'work path' and stroke the pen line with the brush.
I use the elliptical tool to well...make an elliptical figure, I have issues when I stroke it.
It never gives me a solid stroke, it always has a feathery effect.
Is there anyway I can change this to a solid stroke?
I did something and I'm not sure what. But my selection tool has changed. Now when I try to alter the length of a clip in a timeline, it automatically switches to the rolling edit tool with the 2 arrows on either side of a line. If I try to just grab the end of a clip it also drags the end of the clip beside it as well. It affects inserts and almost anything I do. I can't figure out how to return my selection tool to normal.
View 2 Replies View RelatedI don't understand if the problem is the same of this: [URL]
Any way i do not understand with after using -convert point tool- the tool -Direction tool- (2) do not leave me to manage both the direction handles (3). I try to upload a screenshot:
(1): how work Direction tool (it moves both the direction handles).
In pervious versions of photoshop you could make a path with the pen tool and press esc to basically deselect the path without closing it. This would also allow you to make multiple paths so that you could keep making lines and then stroke them all at once. This no longer works with photoshop CC. Pressing esc just deselects the path but when you try to start a new path it continues the first one. Is there anyway to get this feature back in CC? It is such a waste of time to stroke individual paths instead of drawing all the lines with the pen tool and stroking them all at once.
View 1 Replies View RelatedFor some reason I can't select the "stroke path" option with the pen tool in photoshop to add tapers to my pen tool strokes. I can only get dead lines. why is this not working?
View 4 Replies View RelatedIn Indesign CS6 using Mountain Lion, the hand tool appears and I can't select or work with any other tool. All I can do is move the document around. After trying the space bar and other key commands I restarted and it worked for a while. Then it happened again. I work on a Macbook pro, so when I removed the mouse and worked only with the trackpad there was no change. When I quit and reopened, no change. I then deleted prefs and restarted and it worked, but it's been happening from time to time. Any other fix without restarting or deleting prefs.
View 24 Replies View RelatedWhat I would like to do is to get the stroke shape, pressure and maybe velocity after a `Brush Tool' drawing action is triggered by the user, i.e. after a simple drawing operation.
I have been using the ScriptListener plugin, but it does not record this type of operation: changing the brush parameters (e.g. size and opacity), yes, but the actual drawing action, no.
I have a piece of artwork with loads of curves and I'd like to smooth out a few areas that appear a little "wobbly". Is there an easy way to do this in Illustrator CS6 (other than adjusting with handles)?
View 6 Replies View RelatedSimply press 'b' for the bezier select tool, and click where you want a line to begin, and click again where you want the line to end. Now, you can move the line around until you get it perfect by clicking on the dot on either end and dragging it with the mouse. Isn't that neat! You can even click on the middle of the line and bend it! Try it! You can draw any shape with it.
If you make a mess, just press ctrl + z and undo your last changes. The GIMP remembers a very long list of changes, so you can go backwards step by step.
When you are happy with your line, or lines. just click 'Edit' --> 'Stroke path'. A box will open to allow you top choose settings for exactly how you want your line stroked. You can just leave it the way it is, or you can make GIMP do almost anything with your line. GIMP will remember your previous settings too, and offer you the same settings for the next line. When the box mentioned above pops up, I choose my desired settings and hit the "Stroke" button, absolutely nothing happens. No matter how thick I tell it to make the line, no line ever appears.
The pencil tool normally doesn't do antialiasing. However, when I stroke along a path with the pencil tool, the result is antialiased anyway. How can I fix this?
View 1 Replies View RelatedI tried expanded the appearance of the object I am trying to erase and my stroke is set to none and I have checked the settings and there is nothing there in terms of stroke. Here is a screenshot of what happens when I try to erase anything.
View 3 Replies View RelatedI am creating a simple spider for a project. Initally I used the pen tool to make legs. It worked for a bit then all the sudden started filling in an area I didn't even draw with color. I'm not sure what I did to cause this to happen.
View 3 Replies View Related