Photoshop :: Save New Image Size

Apr 7, 2004

I'd like to work with a 1280x1024 *new* image size, but everytime I open up Photoshop 7, I am presented with the basic menu:

Custom
Default PS ect....

720x540 all the way to 1920x1080 HDTV...etc.

No 1280x1024!

I've been looking at the menus until my eyes bleed, but I cannot find a way to put 1280x1024 onto the *new* image size menu. I am left with typing in the size EACH AND EVERY TIME I want to create a blank image size.

View 6 Replies


ADVERTISEMENT

Paint.NET :: Save Onscreen Image (Near 100%) As Final Image Size

Mar 8, 2013

If I load a large image (say 5400 px sq.) in Paint.net (or similar) & choose a zoom level where I like the look / size of individual elements, in ONE area. Image is still no where near 100%.
 
I select a rectangle so the ACTUAL size of rectangle_AND the way the selection looks AT THAT ZOOM level, is what I want. Say, to use as Fx header background.

Problem I've had: Because the image I initially cropped wasn't at 100%, when crop it - the PHYSICAL size of the rectangle may be 1920 x 180 px, but the prgm still thinks / knows it's really 3500 x 450 (or such), at 40% zoom. I can't just save the image - as it looks on screen - & it be that size when reopen it.
 
I DON'T want to resize / resample it, because (sometimes)  that changes the current look (size of certain elements in the image). The only way I've found (gotta be another way) is take a screen shot of the cropped image, at it's CURRENT zoom level. Then it will save as a 1920 x 180 px image, NOT as a 3500 x 450 px image that was at reduced zoom.
 
If I resize & save at a REDUCED %, it can change the look & size of elements. Every thing I've tried to save the image - at it's PHYSICAL size on screen - say 18.5 in. x 1.75 in. (when image is NOT @ 100% zoom), results in saving a much larger image.  I understand this, but looking for a way around it.  Used various settings & tried to trick the apps many ways - cropping in one app, copying to another - you name it.

View 10 Replies View Related

Photoshop :: How To Save Image JPEG For Video Size

Jul 20, 2013

In photoshop, I've created a new document in film & video size as shown below.
 
After I've done my design as saved, I bring it to preview in premier pro. The size didnt match my video settings. how to solve this?
 
in photoshop view:

Saved image view:

View 1 Replies View Related

Photoshop :: CS6 Save For Web Image Size Limit (Retina)

Apr 5, 2013

I have been designing for a lot of mobile sites these days, in particular: iphone retina display (640w).  Most of the time these designs can be long in the tooth with the height of these documents - exceeding 8000 pixels at times.  I noticed that 8000 pixels is the threshold limit for the "save for web" export.  Anything greater than 8000 pixels will be downgraded in quality on retina devices by scaling the image.  The jpg will still be the correct height and width, but when viewed on an iphone, you can easily see the degradation. Images and text are blurry.This is no bueno when trying to show a client what their site will look like on an iphone.
 
A preference to be changed?  Am I missing something to get the full quality of my design comp in order to preserve retina display quality?

View 34 Replies View Related

Photoshop :: How Can I Default My Custom Image Size On SAVE FOR WEB ?

Aug 13, 2007

I'm trying to see if there is a shortcut or way to save my images to the size I want on the SAVE FOR WEB feature

For faster downloads I like to shrink my images to to 800 X 600 - so once I'm done editing them I hit "Save for Web" and then input those figures manually.

Now is there a way to program my Save for Web command so the images are automatically resized to 800 X 600 ? This would save me one step and speed up my work.

View 2 Replies View Related

GIMP :: Save Image With Layer Size?

Dec 27, 2011

I'm always cropping pieces of a large composition, then saving, then undoing and repeating. I noticed that GIMP has an understanding of layer size. If I could only save the image based on the layer size, I wouldn't need to crop every time, then undo. It would just know!

Aside from the redundancy, sometimes changes are made after cropping and saving and I am unable to return back to my original document size after exhausting undo's. Which means that everything else in the image is gone.

View 1 Replies View Related

GIMP :: Save Image With Target File-size?

Jun 2, 2011

I'm currently in the process of organizing my music collection with album art. I found a great site with high quality images[URL] .... and would like to resize pictures to 600x600 within the range of 200-300KB. Is there a way to automatically do this without changing the quality percentage by trial and error?

View 5 Replies View Related

Illustrator :: Vector To PNG - Image Won't Save As Correct Size

Mar 19, 2013

Working in CS5.I have a vector image that I need to resize and save as a .png. I first create an artboard to the correct size I need (55x20 pixels), shrink my vector image to fit and then export to .png using the artboard as my boundaries (so that I get the correct size).Problem is, the resulting file is not 55x20, it is 229x83 (when I open in Photoshop).  I can't figure out why the file is not saving to the correct size.
 
I have also tried opening the file in photoshop and resizing down, but that doesn't work either.  My image becomes very distorted.I don't generally work in pixels or pngs...what would be the best program and process to do this.  It doesn't seem like it should be so difficult, but for some reason it is!

View 5 Replies View Related

Illustrator :: Save Image As Very Specific Dimensions And File Size?

Apr 4, 2013

I have an image received from a client in .eps format.  I need to get it into either a .gif or .jpg format AND the final file MUST be .8 inches x .3 inces, AND no more than 10K in size.   How can I save it with these dimensions/constraints and not lose resolution? What I have tried - export to .jpg (file is 5 inches x 3 inches), export and change resolution to 100ppi (image is nearly the right dimensions, but blurry).  The tools I have are AI and PS both version CS5

View 10 Replies View Related

Photoshop Elements :: Save And Save As No Longer Show File Size?

Jan 23, 2013

I have Photoshop CS6 and Elements Premiere 11 and both were showing estimated file sizes properly up until a couple of weeks ago, and both stopped at the same time.  Using Image, Mode I have verified on both that the images I am trying to save are 8 bit and not 16 bit images.  I am on Window 7, 64bit.

View 9 Replies View Related

Photoshop :: JPEG Size Differs For Save-as And Save For Web?

Jan 6, 2013

I have a PSD file (16bits/prophoto RGB) with some layers. I combine the layers to ONE and change the bit depth to 8 bits.
Then I do one of two things:
 
(a) I save the file for the web in JPEG 90% high-quality and with sRGB ... filesize 340 602
(b) I change the color profile to sRGB and save the file as JPEG in the highest quality (10) ... filesize 174 549
 
I am at loss here. How on earth is it possible that the second file is almost half the size as the one saved for the web?What effect causes this? It is very easy to save for yhe web but as long as the JPEGs are that bigger it's no option.

View 3 Replies View Related

Photoshop :: Changing Logo Into An Avatar - Lowering Image Size And Pixel Size?

Aug 28, 2007

i currently have a logo that is 460X440 pixels and 12.17cmsX11.69cms and the resolution is 96 pixels per inch.

i am wanting to change it into a 2cm X 2cm avatar that is less than 6K in size,

how do i do this? everything i try makes the output file about 24k in size.

the reason i am doing this is the forum i regularly post on has a max avatar size of 6k.

View 3 Replies View Related

Photoshop :: Save Image By Clicking Save As But It Does Not Trigger Any Thing?

Oct 22, 2013

After designing, i try to save the image by clicking save as, but it does not trigger any thing. even if i click save alone. it's still the same thing. Until i try to close the interface, then it will pop-up a dialog message that do i want to save before i close or not, then i click yes but it does not display png,jpeg and the likes as file extension. it only displays psd and some uncommon extensions.

View 3 Replies View Related

Photoshop :: Cannot Save Images From CC As Dialogue Box Opens With Cannot Save Image

Sep 9, 2013

I cannot save images from Photoshop CC as a dialogue box opens with "cannot save image.....as you do not have write access

View 2 Replies View Related

Photoshop :: Difference Between Canvas Size And Image Size?

Aug 28, 2013

1. How do I connect, collapse and disconnect windows (tool bar, property manager, etc.)? They get stuck together and I can't unstick them.  

2. What's the difference between canvas size and image size?  

3. Which tools are only for web design (i.e. tools I can ignore if I'm not doing that)?  

4. What's the subselection tool do?  

For Photoshop:  

1.Why is the original layer always locked?

2. Whats the name of the property inspector in PS? And is it called inspector or manager in FW?

View 6 Replies View Related

Photoshop :: Image Size Related To Print Size

Jan 9, 2003

I'm using Photoshop 7. I create a new document 8.5 x 11 inches at 150 pixels per inch.

I draw a circle 1" from the top of the image. The circle is 3" in radius.

When I print the circle is nearly .25" smaller in radius and slightly less than 1" from the top.

Why is the output not in the same placement and proportions as the image on the screen?

View 2 Replies View Related

Photoshop :: Image Size Of Opened Image Changes After I Close The Image

Dec 11, 2007

I am trying to create some images in PS2 that have to be 3.5 to 4.0 mb. When viewing the Image Size screen, I might see an image size of 9.6 mb. However, when I save the image and run my mouse over the image in Bridge, it shows a size between 2 to 3 mb. I can't figure out why this discrepancy, or what math I need to do in order to figure out how to create the required image size other than by trial and error.

View 1 Replies View Related

Photoshop :: CC Image Size Preview Size?

Aug 11, 2013

In the new Image>Image Size dialog box, the preview is always at 100% which seems a bit disorienting.Is there a way to set that to default to "fit".

View 6 Replies View Related

Photoshop :: CS5.1 - Print Size Is Not Image-size?

Mar 29, 2012

I have CS5.1 on a Macbook Pro.I have an incredibly frustrating problem.    I've seen similar questions, but not an answer that has resolved this for me. I have an image  I have sized to fit an 8.5 x 11 inch paper.  Canvas and image size all indicate my image is sized at 7.33 x 11 inches.  It is at 300 dpi.  Print size  view indicates full space is utilized on either side….BUT…
 
When I go to print, I click "scale to fit media" (which is an 8.5 x 11 paper sitting in printer)  image prints smaller  with a bar on one side.  .
When I uncheck STFM,
I get:
scale  - 92.67%,

[code]...

View 2 Replies View Related

Photoshop :: Image Size, Canvas Size...

Jul 19, 2009

I have a created a new PSD that is 8 1/2 x 11.The canvas size is the same 8 1/2 x 11.I want to put a border around the picture (say 1/2 of an inch all around), and put the finished picture in a Picture frame.  After it is in the frame, you would be able to see the entire picture plus the border. Q.  Should I change (reduce image size) of the PSD to (for this example), 8 x 10 1/2.      Then increase the canvas size to 8 1/2 x 11.  After I increased the canvas size, do a  Paint Bucket fill with white (to create the White border)?  then print the changed size PSD on 8 1/2 x 11 paper so that it will fit into a 8 1/2 x 11 picture frame  I realize I could have just created the new PSD to be 8 x 10 1/2 in the first place.

View 5 Replies View Related

Photoshop :: Image Size Vs File Size

Apr 29, 2009

  When I save a file to jpeg the image size in photoshop remains the same as it was as a tiff file BUT according to the information that comes up in windows properties the file is much smaller (300k vs 2.9mg).   Can you advise me which is the correct file size?   If the correct size is the one showing in windows (300K) does mean that the file compressed in JPG and lost a lot of information?

  and if this is the case how can I prevent that from happening and still save the file as a JPG?   [ I would like the image to remain the size photoshop shows it to be] .  Thank you very much.

View 10 Replies View Related

Paint.NET :: When Image Size Altered Watermark Stay Same Size

Oct 1, 2011

can a watermark stay the same size even when an image size is altered? say if its text and it gets too big when i enlarge the image how do i shrink the watermark ? when it is already merged and flattened as one picture without a separate layer.

such as a php or java script to keep the watermark distinct in a way even in a flattened pic or to select the watermark to erase it and re-apply it in the right font size back onto the resized pic?

View 5 Replies View Related

Photoshop :: Keyboard Shortcut To Zoom Image Area To Image Size?

Feb 22, 2006

Is there a keyboard shortcut to zoom the image area to the image size. Kind of like the shortcut ctrl + 0 but the reverse.

View 6 Replies View Related

Photoshop :: When Convert Image To CMYK And Save To TIFF - Saved Image Grays Out

Jun 20, 2013

I have cs5.1 and when I convert an image to cmyk and save to tiff the saved image grays-out.

View 2 Replies View Related

Photoshop :: Image Exported - Place On Image (Like Watermark) Misaligned After Save

Jul 19, 2012

I have an action in which it will place an image onto an image like a watermark, when i place the image, it is not center by center so i drag it or use keyboard arrows to center and then press enter, then i saw its on the center, but when i save it, the saved image is not on the center, how was that?
 
you can see that the right side of border it is not centered because the left side border is thicker than right side, here is the part of the action
 
you can see that i move the image after i place it because its not on the center so adjusting it makes it at the center but the Translate part is not equal.

View 18 Replies View Related

Photoshop :: Select And Save Parts Of Image With Different Image Quality

May 12, 2009

A while back I took a Photoshop class and remember a lesson on where you could select a region of an image and save it for the web with a high quality and select another region of the same image and save it for the web with a low quality, so that the focal point was saved with a high quality and the background was saved with a low quality. I have no idea where my notes are from this class and can not remember at all how to do this. Can anyone direct me to a tutorial about this?

View 2 Replies View Related

Photoshop :: Save For Web Vs Resizing Vs File Size Vs PNG

Mar 14, 2012

In playing around with some settings while saving a .png file, I noticed some weird results. For this example, the original image is 300 x 300, but I want the final size to be 200 x 200. I get different results depending on the order I perform the following operations (I never thought the order mattered until now).
 
1. start with 300 x 300 image, choose save for web, select png-24, with transparency, white matte, convert to sRGB, change image size to 200 x 200, then save - the file size is 37kb.

2. start with 300 x 300 image, use Photoshop's "image size" to change to 200 x 200, then save for web, etc - the file size is 111kb
 
So depending on which step I resize the image, the file size is significantly different - if I resize BEFORE using save for web, the file size is much larger. This is just weird to me, but I always resize AFTER choosing save for web, so that's why I've never caught this until now. In case you ask, while using Photoshop's "image size", all three options are checked at the bottom of that window, so nothing is getting re-sampled or anything like that.
 
The only thing I can think of is each of those methods treat pixel data differently when reducing the dimensions. When I overlay both exported .png files on top of each other, I see no difference in pixel quality and/or color shift - so why the big difference in file size? if I just save the file straight to .png, the sharpness is much better, and the file size is 46 kb. I did notice when saving for web, the colors become a little more saturated.I've never really paid much attention to the results when exporting .png's.

View 17 Replies View Related

Paint.NET :: Multi-Save (save Each Layer As Image)

Oct 8, 2010

! would assume that something like this has been made but i cant for the life of me find it when shall i find a plugin or default way of doing this i have about 50 layers that need saving as an image each and the idea of doing it by hand scares me.

View 6 Replies View Related

Photoshop :: Image / Resize / Image Size In PSE7

Feb 6, 2013

I am having trouble with Image/Resize/Image Size in PSE7. In the past I had a document size of 4x6. When I wanted to reduce the # of pixels, I just entered new #s and the document size remained the same. A couple days ago I changed both the document size and canvas size. I cannot get my old settings back. I even uninstalled and reinstalled the program, I also have PSE11 on a trial basis and it also only sees the changed settings. I've tried changing Scale Styles, Constrain Proportions & Resample Image, in addition to changing the Canvas Size but cannot get it to work like it did before I changed the settings.

View 6 Replies View Related

Photoshop :: Cannot Save File...the Document Size Exceeds 2G

Feb 10, 2005

I'm working on a large tradeshow booth design. It was suggested that if my computer can handle it, to work at scale (120 " X 90") at 150dpi. So I am.

I am nearly finished designing and now Photoshop 7 is giving me an error:

"Cannot save file...the document size exceeds 2G." Or words to that effect.

The document window tells me that the file is 970 MB, less than a Gig.

I've purged all hidden layers to reduce the overall files size. No go.

I removed the last image I had in the design, which used outer glow effect, and now the file will save.

View 4 Replies View Related

Photoshop :: How To Batch Process / Save For Web Various Images To Same Exact KB Size

Dec 11, 2012

I have a batch of 500 jpg images all in different sizes 732 KB, 634 KB, 664 KB etc.

I need to compress / save for web down to 130 KB the entire batch. I've managed to create an action which compresses them lower than 130 KB at different sizes depending on how light or dark the images are,  but still not to an exact number. Is there a way to create such an action or script? I'm working off of Photoshop CS5, iMac 10.5.8.

View 2 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved