Paint.NET :: How Magic Wand Allows Users To Set Tolerance

Dec 8, 2012

You know how a magic wand allows users to set a tolerance and select accordingly.
 
Well this usually works well for most people's purposes but what if the object concerned has a shadow or highlight effect that would fall through the cracks and require more editing.
 
What I was thinking here is that it would be very useful to be able to not only set tolerances for the tool but also set a 'border' variable in pixels. Hence it would be much easier to extract that text or object with its shadows intact (and requiring less retouching work)

View 3 Replies


ADVERTISEMENT

Photoshop :: Magic Wand Tool / Tolerance Value In...

Mar 26, 2008

Select with the Magic Wand tool

I am curious about the math for the Magic Wand Tool in the following circumstance:

The RGB image has been converted to GREYSCALE and then into LAB mode.
The lightness channel is selected only and I wish to create various selections with MAGIC WAND TOOL based on numerical values entered in the field TOLERANCE.

The image (as described above) shows values in PERCENTACE for K (Black) when in LAB mode.
Now how does the value of TOLERANCE correspond to the value K: for this case?

View 7 Replies View Related

Photoshop :: Magic Wand Tolerance And Color Selection

May 16, 2006

Either my lack of sleep has caused me to overlook something obvious or my magic wand has gone haywire. Basically, the wand behaves as if the tolerance is set much higher than the value I select. Even if I set it to 0, the wand selects colors that are radically different.

I am working with all channels (not just red for example), the file is a single layer, etc. I've worked with PS for years and I can't see what I'm doing wrong.

In the attached file I selected the white area just above the check mark. With my settings, it should select all the white around the check. Instead, it selects half the white and some of the check, as you will see.

View 5 Replies View Related

Paint.NET :: Magic Wand Deletion

Oct 27, 2011

when I paste a picture from the internet with a white background, I use magic wand on the white then press delete. AND IT LEAVES A WHITE LINE. Disabling anti aliasing does nothing, it will still show.

After I delete it I have to go through with the eraser tool along the whole thing and erase. (Which I did everything so far 'cept the top right of him.

View 3 Replies View Related

Paint.NET :: Use Magic Wand Only Within Selection

Sep 18, 2013

I want to select a small section of an image (say for example, an eye on a person's face), and use the magic wand only within the selection. I don't want it to go beyond the selection, no matter how high the tolerance.

View 2 Replies View Related

Paint.NET :: Transparency With Magic Wand

Sep 19, 2013

I have a 250 x 250 pixel photo and I want to make the background transparent, I was told to use the Magic Wand but I see no option for transparency.

View 4 Replies View Related

Paint.NET :: Unable To Make A Magic Wand?

Jul 1, 2011

i am trying to make a transparent image, taking the back ground out of a pic and im following the tutorials and i have no magic wand in my paint.net?

View 10 Replies View Related

Paint.NET :: Paint Brush Over Magic Wand Area

Jun 2, 2011

I have colored in a part of a picture using the magic wand selection tool, then paint bucket. There is still some missed areas So I try to use the paintbrush tool .

However the paintbrush tool isn't applying any color (with me) .

View 1 Replies View Related

Paint.NET :: Remove Already Selected Portions Of Magic Wand?

Sep 24, 2012

I have used Photoshop for a while and right now I am trying Paint.net, there are a few things that I really do not understand.

1)When I create a font layer and wish to come back to it later on by modifying the font size or font type, I have to delete the layer and then redo type it again which I find totally useless. When you make a menu for a restaurant for example, the last thing you want is to delete the layers and replace them each time. If Paint.net works this way then I cannot see how it is possible to use it on a daily basis.

2)When I wish to crop something, it is impossible to select certain area of the cropping that have been selected by the magic wand. How to remove already selected portions of the magic wand? Sometime it may choose a tiny portion of the picture that you do not want to crop at all.

3)Choosing a layer on click.

This is a huge problem, we have on the right side of the screen a multiple layer dock, in photoshop for example, when you click on the graphical work, the layer is auto selected, in Paint.net I cannot find this "must have" function.

4)Creating a rounded picture without the need to cut the corners to get to a final rounded banner or whatever we are trying to achieve.

How can you create a rounder banner in jpeg for example(no background). At the moment I can only crop a picture from a square canvas and save it as png(foo background transparency), but how to create the same picture in jpeg? The canvas is always square.

View 7 Replies View Related

Paint Shop Pro :: Using Magic Wand On Already Selected Image Part

Feb 8, 2012

In my image there is an white sky background, where in front there is an person wearing white shirt.

I want to select a by color part of the sky. So I am using magic wand (match mode "color"). The problem is that it select the white shirt as well.

So, using freehand selection, I selected just the sky. Once I want just a color (not all sky), I am trying to to use magic wand (match mode "color" in mode "replace"). But once already exist a selection, the magic wand isn't available to "replace" (just in other modes - add or remove).

How could I make this selection without selecting the shirt? The intent of my first freehand selection was to protect the magic wand of selecting the shirt...

View 3 Replies View Related

Paint.NET :: How Picture Looks Like After Clicking On Picture With Magic Wand

Jun 5, 2011

I'm just working on a flyer for a party and I like how the picture looks like after clicking on the picture with the magic wand.Now the question if I can save that picture with that looking someway?

I could use the print button, yes but then I lose the quality of the pic.

View 2 Replies View Related

Photoshop :: Magic Wand

Aug 12, 2007

I was using my magic wand to select things with no trouble, then began working on something else. When I went back to using the magic wand, it was a rectangle and I couldn't get it to select anything. When I pressed the shift key, it would turn into the wand with a plus sign beside it.

View 1 Replies View Related

Photoshop :: Magic Wand In CS3

Feb 14, 2008

I've recently upgraded to Creative Suite CS3, and after watching the tutorials included in the suite, I realize I don't have, or am not able to find, the magic wand.

View 9 Replies View Related

Photoshop :: Magic Wand

Jan 13, 2004

what does the magic wand do ? any body show me a pic of what it does? and how do I find the copyright symbol?

View 9 Replies View Related

Photoshop :: CS3 Magic Wand Bug?

Dec 19, 2007

I'm want to use photoshop CS3's magic wand tool to make a selection of a colored shape on my background layer.

However when I click the mouse, the wand selects EVERYTHING on the layer. it doesn't matter what my tolerance level is set to. I've tried cranking it down to 0 and I still get everything selected.

View 39 Replies View Related

Photoshop :: CS5 - Magic Wand Tool

Apr 2, 2012

When I use the magic wand in Photoshop CS5, it selects the entire image, not just the section I'm hovering over. I'm working in a Windows environment.

View 3 Replies View Related

Photoshop :: Magic Wand Not Functioning / CS4

Mar 23, 2013

I have CS4 and am unable to use the wand tool as it used to work.I've checked the color picker settings, and it is always set to point sample, and STILL does this. I've checked and unchecked the anti-alias, contiguous, and sample all layers boxes and set them to every possible combination of the three. I've set the tolerance level to multiple numbers and it does not affect the fact that it selects like this. In fact, setting the tolerance and checking either anti-alias or contiguous does NOT affect how it selects, and it will always select like this. I've found that it is selecting EVERY color/line created, regardless of opacity of the line. I've reset the tool multiple times, reset the color picker multiple times, and reset all tools several times. No affect.
 
I've tried asking on Tumblr AND on deviantART and have asked Google multiple times since the issue rose, and have seen several fixes for similar problems (none of them exactly like this, as far as I could tell). I've also even gone into the AppData file and deleted the .psp file.
 
I've changed settings around in Photoshop, and it doesn't seem to affect anything. I really need to use the Magic Wand tool for my artwork, to select shapes in individual layers, so that I may shade them. Another problem with the selection is that whatever I select is aliased, despite the "anti-alias" box being checked.
 
I realize that I can use the "select pixels" option that shows up when I right click a layer, and it produces the same effect the wand tool ONCE had, but I'm used to using the wand. I'll be using the select pixels option for now.

View 4 Replies View Related

Photoshop :: Magic Wand Tool

Nov 19, 2012

Magic wand tool. Attached is an image that I would like to leave the top story color and the rest black and white. I think I use the Magic wand tool and how do I do it?

View 9 Replies View Related

Photoshop :: Selecting Using The Magic Wand

Mar 8, 2007

I want to select an area with the magic wand, the magic wand icon disappears and there's a rectangle icon by the curser. At that point, the entire image is selected, not just the area I'd like. I've adjusted the tolerance to 70.

I'm using photoshop CS2 with a mac.

View 3 Replies View Related

Photoshop :: Magic Wand Selection In CS4

Mar 2, 2009

I do illustrative site plans for an architecture firm. I frequently use the magic wand to create selections in pdf's created from a CAD system. I usually import them as a smart object so that they may be updated regularly as design changes are made. However, in CS4, I am finding it very difficult for the magic wand to make selections in between lines of a pdf. No matter what I set the tolerance at, it seems to select more than the area that I am trying to select. I recently installed all updates and it worked for one day and then returned to making incorrect selections.

View 2 Replies View Related

Photoshop :: Script With Magic Wand Tool?

Sep 14, 2013

I'm new and with a script that using Magic Wand Tool (tolerance 255, anti alias , contiguous)  click at middle center every image. My images are transparent with many objects in each and I just want to choose the middle_center object and eliminate the others, so i need this scripts.

View 2 Replies View Related

Photoshop :: Magic Wand - Inverting A Selection

May 14, 2012

I have selected part of an image with the magic wand. How do I invert that selection, so I can paint on the excluded side?

View 2 Replies View Related

Photoshop :: Use Lasso Tool After Magic Wand?

Jan 27, 2013

I used the Magic Wand to select the white area then inverted the selection to select the bodies.The result is in the attachment. BUT parts of the shirt and the paper are not selected. How do I select them? Do I need to use the Lasso Tool after the Magic Wand?

View 5 Replies View Related

Photoshop :: CS Crashes Upon Using Magic Wand Tool

Oct 19, 2012

Every time I use the magic wand tool, Photoshop CS crashes. I tried resetting the program but it didn't work. I cannot find a patch for this anywhere. Its making photo editing very difficult! Is there a patch I can download anywhere?

View 2 Replies View Related

Photoshop :: Changing Colour Using Magic Wand

Oct 1, 2011

I have selected part of a photo i wish to change the colour of using the magic wand now when i goto change colour using hue and saturation I cannot locate the exact colour that i want..

View 6 Replies View Related

Photoshop :: What Value Magic Wand Uses To Make Selection

Sep 18, 2013

What value the magic wand uses to make its selection?

I believe it is luminance but after testing I am now not so sure.

View 2 Replies View Related

Photoshop :: Magic Wand Changes To Rectangular Marquee?

Jul 29, 2006

I'm trying to select an area using the magic wand. It shows the icon of the wand when I select it, then it changes to the rectangular marquee when I go to the image ... I've checked that I'm on the correct layer.

View 1 Replies View Related

Photoshop :: Selection (when Using Magic Wand Tool)

Jan 16, 2008

trying to learn and use selections... I have a image from which I want to extract only the complete faces of some people. it's a tough one since the background and the hair are difficult to distinguish for some people even when using the magic wand. What I am trying is (while using the magic wand tool) is that I click on part of the image and if feels that the selection is correct then i do a right click and then select "Add to selection"...

Question: Once I have done so a couple of times, can I somehow display/show the intersection (SUM) of all the areas that I had added as selection and then either copy/paste or do somethiing.

View 2 Replies View Related

Photoshop :: CS3 Magic Wand Tool Missing

Mar 31, 2009

I just installed Photoshop CS3, and I cannot find the magic wand tool anywhere! If I look up "magic wand" in the help it says it's there ("click on the magic wand tool") ... but it's not in my copy.

View 5 Replies View Related

Photoshop :: Resize Handles & Magic Wand

Mar 20, 2006

1. If I use the magic wand on a very odd black shape to select it and then copy & paste this shape on top of another layer, I used to have resizing handles to resize it. For some reason I'm doing the same thing but I don't see the handles. What did I do wrong?

2. The same shape as above selected with magic wand, when pasted on top of another black shape, I see a thin white fringe as part as part of the cut shape.

View 2 Replies View Related

Photoshop :: To Get A Clean Cut Line W/ Magic Wand?

Mar 1, 2007

I'm trying to cut out the outline of a guitar from a photo using the magic want tool.

The line never seems that sharp.

Always step shaped aliasing on close up.

Tried the feathering option but then it just seemed blurry.

How do you get the cleanest sharpest contour line possible.

Touch up by hand takes forever and is hard to get neat.

Does it matter how enlarged the photo is when you are working on it?

View 1 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved