I'm new to GIMP and am very stuck just trying to save a GIH file. GIMP only allows saving XCF files, but the documenation says to use the "SAVE AS" command and then a new dialog box is suppose to appear.
View 2 Replies
I've just installed the Gimp 2.8.0 with Windows 7 after breaking up with Photoshop over crashing issues.
One thing P/s did have going for it, there was a plugin you could install to save any image format as a .ico (Windows icon) file.
Despite what I've done from online tuts etc, I can't get the Gimp to save as a .ico file. (The file types in which to save seem very few).
OK - so i've done a little bit of an edit to a photo and just wanted to save it to a jpeg so i could use it in other stuff. I was just wondering where this function is?
I've attached an image of the options that are available to me when i select save as.
how to set the default save file type to 100% JPG every time starting at a named folder. What I am looking for is to hit save and it to have pre selected a particular folder / to have remembered the last folder I saved in, and without need to interact with dialog boxes have it save in my chosen format at the quality I want. (i will never need to re-edit).
View 1 Replies View RelatedFor some reason Gimp 2.8 forces me to save in xcf format. Most times I want to save a file in jpeg or png format. Having to save as xcf, and then export to jpeg or png is a pain in the unmentionables. Especially when reopening the file for editing, requiring another pointless dance with the export system.
Is there some module, upgrade, improvement, fork or other means by which export is merged with save/save as functionality, thus removing the additional steps in the process of saving a file? Ideally it should involve nothing more than hitting Ctrl S for an a file that already has a name. Put another way, something that works the way everything else does.
I open a jpg file in gimp and use the crop tool. I see the cropped part highlighted and the part to be discarded as a surrounding shaded area. I am happy with the cropped part and open a file-save-as dialog through the file menu. I type in the file name and think I am done. But when I open the saved file, it looks the same as the uncropped file that I started with in the first place. What am I failing to do to make the gimp save my change? I guess the answer is that I didn't really make a change but only thought I did. So how do I actually change to the cropped image?
View 10 Replies View RelatedIs there a way to remove some of the "save as" file formats from the list (when saving a file as...)? After numerous years in my field, there are a number of file formats I have - and probably never will - need to save my files as. If I could remove some of them, then it would speed up my workflow (so that I don't have to scroll down every time I save a file).
View 6 Replies View RelatedI'm currently in the process of organizing my music collection with album art. I found a great site with high quality images[URL] .... and would like to resize pictures to 600x600 within the range of 200-300KB. Is there a way to automatically do this without changing the quality percentage by trial and error?
View 5 Replies View RelatedIs there a way I can change the default file format from .xcf?
For example, I open a jpeg, crop it and try to save, but if I then try to save it as a jpeg I get a message telling me I have to 'export' first.
I know the Gimp isn't Photoshop but in Photoshop you get the option to choose the file extension at save or save as without the added step of exporting.
Is there a setting somewhere that allows me to choose as this messing around exporting from .xcf is a real drag when you're editing a lot of images. Plus you can end up with extra, unwanted, .xcf files.
Is there a reason why the Gimp defaults to .xcf for every file edit? It seems unneccesary when all you're doing is a simple crop etc.
Again Photoshop opens, allows edits and then saves in the original's file format, which does make for a more efficient workflow. Plus it doesn't default to .psd for every edit.I'm using Gimp 2.8 with Fedora 17 64bit and will now boot into Windows to work more efficiently in Photoshop till I can find a way to change this in Gimp.There doesn't seem to be anything in Preferences relating to file formats/extensions.
After removing an image from a background, what is the proper procedure ( in order) to "save" the image to "file", for later use?
View 1 Replies View RelatedWhen saving as a .png file, there is an option to enable/disable "save resolution". What is this option for? I've tried Googling, but no luck due to many unrelated search results.
View 4 Replies View RelatedI just worked on a pic in gimp, went to save as, the file appeared just a white square, the pic did not come up.
I tried a few tricks to convert to jpeg, no luck. IT ONLY creates files Ive never heard of xcf, etc. is there no way to get a good jpeg file?
I am unable to save an image as a jpg file!!! every time I try, I get the following error: "Not A Regular File"
I can save as png, but not jpg!!! the original format was psd, that error message came up when saving as jpg... when I saved as png, I closed Gimp and reopened the png file, but I STILL get that error message when saving as jpg!!
So I am making digital color prints at 24x30. the photography work is about color fields and gradients, so I need super high res files. I have set the size to 24000x30000 pix at 1000 dpi..now my problem, when i go to save the gimp file as a jpeg i get this error message "JPEG image plug-in could not save image"
View 3 Replies View RelatedI only recently upgraded to 2.8 from 2.6 and was wondering if I am the onlyone missing the option to edit the file extension in the SAVE formwhich basically allowed you to Save, Save Copy, Save As or Export to anyformat from the same form?
I also found it strange that if I now open a JPG file (or drag into GIMP),I can't save changes (to the JPG) directly (it wants to save to native Gimpformat), so I again first have to go to Export instead!
I am wondering why this was incorporated, and if it's going to stay, is there a setting I can set to work like I am used to (and find much fasterand more flexible)?
I have the student version of AutoCAD 2012 on an HP laptop with Windows 7 Home Premium OS. I originally installed AutoCAD in June of 2012. It worked fine for 9 or 10 months but now whenever I select File/Open, File/Save, or File/Save As, AutoCAD stops responding and the spinning blue donut appears. AutoCAD never comes back and I have to close it from Task Manager. I uninstalled AutoCAD and reinstalled it, and the process went smoothly. However I still have exactly the same problem with the File operations. I apply Windows updates, but other than that have not made any changes to the software on the laptop. AutoCAD works fine for everything except the File operations. I am able to save with CTL/S and am able to open AutoCAD files from File Manager.
View 3 Replies View RelatedURL....I am using PSE 12 as a photo editor for Aperture 3.5.1 and the photo is duplicated (as a tiff) in Aperture and PSE editor opens with the image. When I close the file and say to save the file it brings up the save as window.
I tell PSE 12 to "on first save -- save over current file" it now brings up the "save as" window and won't save over the file (changes the file type from .tiff to .tif)
I have Photoshop CS6 and Elements Premiere 11 and both were showing estimated file sizes properly up until a couple of weeks ago, and both stopped at the same time. Using Image, Mode I have verified on both that the images I am trying to save are 8 bit and not 16 bit images. I am on Window 7, 64bit.
View 9 Replies View RelatedFrom the start, I wasn't able to save to jpeg without getting a dcm extension (no jpg extension). However, if I saved to Multi-picture Format, I would get the familiar .jpg and everything worked fine for a while. This morning I cannot find a file format in "save as" that results in the .jpg file extension.
View 2 Replies View Relatedwhen im about to save my file *project* nothings happen
View 2 Replies View Related[CS6 Extended]I want to click with the mouse on a symbol (normally it should be I disk symbol I think) to save mychanges instead of use of File->Save or Ctrl+S.
But the problem: I can't find a disk/save symbol in Photoshop andalso don't know how can I get it.On "Window" menu I can't get a word "Save" to checkmark it.How can I get a "Save" symbol in Photoshop CS6 Extended?
I have a number of PSD files I've created and I'm trying to save them as PDFs. I can Save for Web and Devices, I can save as a .gif, .eps., and every other format I've tested, but I cannot save as a PDF. I get the error:
"Could not save a copy as (filename) because the file is already in use or was left open by another application."
I'm running Adobe Master Collection CS5 with Photoshop CS 5.5 (12.0.4 x64) on a Windows 7 64-bit machine.
I have a 928 GB HD with 697 GB free.
I have rebooted and tried saving the files immediately after I reboot. I have killed my virus scanner. I have killed a number of other possible culprits including Acrotray.exe and CS5ServiceManager.ext
I have run Process Explorer as recommended by Microsoft and found no applications using the file. I've also tried saving the file to my external hard drive and/or renaming the file with only rare luck.
The boards seem to suggest Adobe isn't taking responsibility for this and pointing it back to the OS or other software. How/where to kill whatever process it is - but at this point, all my indicators point back to Photoshop.
Save PSD File of Social Icons to Separate PNG image files for each file
View 7 Replies View Relatedam having an Issue with CS6 when saving files. When saving a file using the 'Save' option (not 'Save As') the file is not staying at the size of the artboard as it should, it is however being aurtomatically cropped down to the actual artwork size. This is causing issues with the Process we work with as we need the file to stay at the artboard size.If I click 'Save As' and change the Adobe PDF Preset to 'Press Quality' then this works, however this means that every file we save(which is quite alot in a day) means we have to go through the 'Save As' option and manually change each save.why this has suddenly started to happen with our Illustrators and do you know how to fix this so that it stays at the Artboard size when 'Save' is used?
View 17 Replies View RelatedI found this error a bit strange, my colleague it trying to save a file and this error keeps on coming out (see attachments). When we try to save it, it only saves as a temp file. When we try to open up the temp file and try to save it, it still doesn't allow us to do. Also, when we cancel the save, the original file will be gone and he will lost all of his data. Below are the specs of the computer and version of the AutoCAD.
Computer: DELL Precision T5500
OS: Windows 7 Ult
AutoCAD Version: 2011
Also, we're using ProSteel Series 3 as well. We tried saving the file using ProSteel and just AutoCAD but it didn't do the trick. I've tried some options (listed below) that might get it to work but still no luck.
1. Restart the computer.
2. Repair / Reinstall AutoCAD.
3. Give permission to the folder (read from the forum).
I'm using the file dialog snippet as the foundation for a save as dialog box for saving a new copy of my template assembly to a project folder. Is there a way to disable the ability to click on a file in the window which puts that filename in the input box? The assembly file name is standardized and pre-"calculated" by my code and its a decent hassle if you accidentally click another file because the user would either have to rewrite the file name by hand, or cancel out of the dialog box and re-navigate to the project folder.
Inventor 2013 SP 1.1
I did a search around, and did not find the answer. Basically I have attempted to create an action in Photoshop CS6 which will save a file in the tiff format after i crop the image. I want the file name to be the name of the image (which is supposed to change depending on name of the image) like this:
1280x720_MGXXX.tiff, where, in my case the XXX represents DIFFERENT NUMBERS.
I want to apply the action to one image at a time. Each image has a different number (name). I record the action, add the 1280x720 text to the image name in the Save dialog. I am saving the image in a different folder from the source file. The source file name is _MGXXXX.tiff (again XXXX is a number like 2220...).
When I run the action on a file, say "_MG2221.tiff" it adds the 1280x720, and saves the file. When I apply the action on the next file (_MG2222.tif), the action overwrites the existing file, 1280x720_MG2221.tif, with the image. The action always uses the name I entered in the Save dialog!! I think I was able to do this in CS4 and CS5.
I want to be able to open a file, crop and adjust it, and then save in a diff location with 1280x720 pretended to the file name.
I am trying to find a way to save my image file as a jpeg and add -web or -print to the existing file name. This way I can easily see which files are lower resolution for web posting or high resolution for printing.
View 8 Replies View Relatedif i need to rename or change anything in the iproperties of ipt, im doing it from the vault.my problem is that, when i change something in iproperties of an ipt thru vault, i have to open the idw to update it.
as most of the iproperties in ipt shows in the idw.
its easy to change the properties in vault. but its deleting its purpose if i have to each idw to make sure i have the updated idw.is there a code where i can open all idw and save the same file and checking to the vault automatically?
I am saving work as jpeg into desktop file.... sometimes (not always) when I go to retrieve it ...it shows up as a file that I cannot open, not a normal jpeg. I just tried to copy and paste to show here..then draged into this space and it opened...tried to save it to desk top from here but it is still showing up as a very weid icon that will not open...? In the properties it shows as a jepeg, but the icon is totally different..
View 1 Replies View RelatedCivil 3D 2013.One of the problems my team has is that we have a number of remote offices that all work on the same drawings. To ensure integrity of the drawings, we use a Wide Area file replication and locking service to ensure the files do not become out of sync and corrupted between offices.
AutoDesk seems to open and save files and their subordinate xrefs serially in a single thread instead of in a multi-threaded manner. Because of this there is a Huge time impact on just opening and saving files at remote sites as a result of Civil 3D having to wait for the home office file lock check on each and every file before opening the next file.
We have 100Mbit down / 20Mbit up transmission links at both sites dedicated to the file replication, with Gbit backbone in both offices.
note that the remote site has a full copy of all files in its replicated share. These local files are what Civil 3D is opening. No Files are being transferred during file open unless a remote change has just occurred (proven through replication logs).
When the drawing file is opened for editing, a file lock check is performed and Windows waits for the response to ensure it can be opened for editing before telling Civil 3D. When Civil 3D has this file open, it has a list of all the xrefs for this file. Civil 3D then seems to open each file in sequence.
This is a problem when a large latency is introduced through our 3rd party Wide area file system by a remote site file lock check.
This is not AutoDesk's fault but the compounding of the two system's operational behaviours, causing a Very long wait on file open, Save, PaperSpace operations (30 minutes for large drawings).
I would like to see a multithreaded (threadpool) file open occur against the entire list of xrefs (during save as well). Then recursively executed for all subordinate xrefs of those files until the operation is complete.
As long as a file list is maintained during the operation and updated as each file operation completes (which obviously it is) in the primary thread, this should not cause any problem. All dependancies can be opened in sequence once the initial file operations are complete and when a particular file in the list is required but not open yet, it's priority can be raised in the threadpool.
