I have a double-lined duct lisp but I would like the duct size to automatically be inserted. Now I have to type it separately. (AutoCAD Architecture 2010)
View 8 RepliesThis is a duct lisp which is i found , which code line i have to change and how for radius value ? for example if my .
" Specify first segment width value " is 1500 then i wanna be my inside fillet radius 1500 / 3 ---------------------------------------------------------------------------------------------------------------------------------------- (defun c:duct(/ actDoc Ang1 Ang2 ptLst enDist fPt lEnt lObj lPln oldVars oldWd plEnd plStart1 plStart2 prDir segLst Start stDist stLst tAng vlaPln *error*) (vl-load-com) (defun GetPlineVer(plObj) (mapcar 'cdr (vl-remove-if-not '(lambda(x)(=(car x)10)) (entget plObj))) ); end of GetPLineVer (defun asmi-PlineSegmentDataList(plObj / cLst outLst) (setq cLst (vl-remove-if-not '(lambda(x)(member(car x) '(10 40 41 42))) (entget plObj)) outLst '() ); end setq (while cLst (if(assoc 40 cLst) (progn (setq outLst (append outLst (list (list (cdr(assoc 10 cLst)) (cdr(assoc 40 cLst))
[code]............
I've trying to track down a solution for an issue that we are experiencing. When some of our lisp programs get run, you can no longer double click on text to edit it in paper space. If I put text in model space, I am able to double click to edit it. Is there a variable for this?
I just verified something else, if I move the text to be outside of the View Port, I can double click to edit the text. If I try to double click to edit while inside the viewport then it switchs to model space withing the viewport.
What I want is every time I click the mouse after the intial entering of the width it prompts me to do a single branch, double branch or transition. then asks for size, etc. This used to work but now it does not I am using 2011 MEP
(defun cuctsh (/ tcwidth pt1 pt2 threshhold ss segment oang inrad ofrad outrad 1o1 1o2 ro1 ro2 eao ea ebo eb a dimpt xa rb ra) (setvar "cmdecho" 0) (if (not cwidth) (setq cwidth 0.0)) (prompt (strcat "
Enter duct width or diameter <" (rtos cwidth) ">: ")) (setq tcwidth (getreal)) (if tcwidth (setq cwidth tcwidth)) (setq pt1 (getpoint "
Start point... ")) (if pt1 (setq pt2 (getpoint pt1 "
[code]....
I want to know how to create linetype with double lines one rectangle empty and other with solid in autocad(i am using autocad 2004)I tried by express tools with command mkshape (and then makelinetype command) but it is coming without solid, is it possible in autocad by using Autolisp, see attached dwg, name is linetype_ds
View 2 Replies View RelatedAny way to customize the double-click of a block attribute to run the _ATTIPEDIT command on the targeted attribute? I know this can be achieved by holding Ctrl & then double clicking, but I am often using my hand else where on the keyboard, or even more often, when entering many values into attributes, I am using my left hand to keep my place on a sheet of paper as I scroll down it and enter in the values.
View 5 Replies View RelatedI have this interresting problem, it occured just here, in other situations, the script works fine.
I am counting length from coordinates:
Command: (setq bod1 ppo_bod1)(-0.821965 -1.7232 0.0)Command: (setq bod2 ppo_bod2)(25.428 13.1268 0.0)Command: !mfac0.025Command: (setq x (atoi (rtos(/ (abs (- (car bod2) (car bod1))) mfac))))1050Command: (setq y (atoi (rtos(/ (abs (- (cadr bod2) (cadr bod1))) mfac))))593Command: (- (cadr bod2) (cadr bod1))14.85Command: (/ (abs (- (cadr bod2) (cadr bod1))) mfac)594.0Command: (rtos(/ (abs (- (cadr bod2) (cadr bod1))) mfac))"593.99999998"Command: (atoi (rtos(/ (abs (- (cadr bod2) (cadr bod1))) mfac)))593
As you can see, the conversion from 594.0 (real) to string causes an inaccuracy, which is strange, because the length really is 594.0
I need a function that allows to convert the polylines selected with a width globalize defined in a double closed line (spaced by the same width of the polyline), with a hatch inserted automatically defined.
Brilliant idea to draw raceways quickly: instead of making handmade double lines, connect, enter the hatches all by hand, you could quickly draw the polyline with width identical to the size of the duct, and then the lisp transform it into a duct more aesthetically pleasing if compared to the full polyline!
I want to doubleclick on a dimension and have the DIMRND override appear
I can't figure out what command I need to customize the doublclick CUI
I have double line pipe drawings but i have to change distances between of this lines in entire drawing and i was thinking that maybe there is a lisp code which can create new double line according to my specify dimensions ...
example :
Distance between lines : 100 mm
------------------------
------------------------
here is what i want to do :
1. select double line
2. specify new distance ( for example 200 mm)
3. lisp will create center line middle of the selected lines ( maybe it can ask me that this center line will be permanently or not )
4. lisp will create new double line from this centerline according to my specific distance
5. new double line layers will be the same with selected old double line
and this lisp has to work for double arc or quarter circles too.
I urgently need a program that can auto number panels for a large drawing I have. I have a lisp program for auto numbering but we need each insertion of text to start with a P i.e. P1, P2, P3 etc etc.
View 2 Replies View RelatedIs there a way to set the Auto Constrain setting using lisp. I would like to be able to run a quick constrain all and then delete all constrains to fix gaps in geometry. However I only want to use the coincident, Vertical and horizontal.
View 1 Replies View Relatedhow to write a lisp that when i activate it, it will change all the objects in the drawings to be change to "Layer 0" and all linetypes "Dashed" change to be "hidden"...
View 9 Replies View RelatedIs there a way Autocad could just do what I asked for, and nothing more?A few examples
- After publishing, the publish dialog auto closes. I don't wat that. After publishing dwf I also want pdf.(I know you can save the list, that's not the point. If you didn't close the dialog I wouldn't need it)
- When selecting a hatch, the ribbon automatically jumps to Hatch Editor. I don't want that. Maybe I just want to change the layer. I can find the Hatch editor my self..Dito for XREFS
- I do not want any dialog giving me warnings, about anything.
If an XREF doesn't get attached, I can see that. I don't need a dialog telling me.If a shape file is missing, I can see that..A triangle sign above the command line is totaly adequate.Don't auto open or close dialogs, for what ever reason.
So ... don't auto do anything I can perfectly do manualy. No doubt there are a few more examples I can't think of right now.The nice thing would be to get a variable that gives me that "no auto" mode.
I wish to have a lisp than enable to do automatic offset base on some selection of lines ,circles or polylines object as shown in attachment.
View 9 Replies View RelatedIs there a command or a lisp that will automatically dimension each side of a closed polyline at once? See attachment for image.
View 1 Replies View RelatedI've tried doing a block that automatically updates the X and Y coordinates from its moveable leader. I can get it to work in model space or paper space. But my problem is I want it to work in PS, but update with the MS coordinates through the viewport.
I can get it to update, by LISP, by picking a point and passing the points to the blocks attributes. At the moment I have a LISP when actioned it locks the viewports, activates the viewport, and asks you to select a point. Once selected it de-activates the viewport (going back into layout tab) then asks which block you want to update. Where you now select the block and it updates the coordinates. I.e. manually pick the point in MS, switch to PS and then manually pick the block. Then I have to manually modify the leader to the correct location.
I'm hoping that I can (In PS) move the end of the leader to snap to a position in MS and the coord updates to reflect the correct MS coordinates. I'm thinking that maybe this can't be done automatically and that I maybe can move the leader but I'm not sure how I can do it without running a LISP to update the block?
I'd be happy moving the leader then just running a single command and the leader coordinates updating without having to select the points and the block again.
I've attached the block showing the auto update of the attributes (fields).
I have two attributes "REVN" and "REVD" in a block "ATT" that I would like to change (globally preferably) to the following.
(1) Existing text to keyboard entry text.
(2) Colour from existing to 10
I am a bit lost in the (command "-attdef" .......)
(defun c:atc ()
(setq rev (getstring "Please enter review"))
(setq dat (getstring "please enter date"))
(command "-attdef" .."ATT".."REVN"....."c" "10")..)
(command "-attdef" .."ATT".."REVD"....."c" "10")..)
)
When I click on an object to retrieve it's extended data, the data keeps writing to the right, it does not return to the next line, when the text approaches the end of the screen. Very difficult to analyze information.
View 4 Replies View RelatedI want to know is there any formula/calculation for the width of text object before creation/insertion? At now I used approximated width size via a simple .
(Defun GetStrWidth (str H W) (fix (*(* H W) (strlen str))));;usage: (GetStrWidth "This is a Text." 2.5 0.8);;H: TextHeight; W: width factor.
I know that for the existed text in drawing I can use textbox command, but for the texts that has not been created, what can I do? Is there any formula/calculation depends on font name, text height and width factor?
We are using autocad 2012.
Is there a way to move all 3.5mm text to layer text3.5 and move all 5mm text to layer text5.
A program that prompts:"select objects:" then I can select some objects like as text, line, circle,... after that program find all texts in selected items and swap text
swap means: xxx/yyy ===> yyy/xxx ; "/" is a divisor
swap function for one text is here:
(defun c:swap ( / pos ent el txt)
(vl-load-com)
(if(null #div#)(setq #div# "/"))
(setq #div#
(if(=(setq tmp(getstring(strcat "
Divisor character: <"#div#"> ")))"")
#div# tmp
)
[Code]....
but I want a program to prompt me like this:
(prompt "Select objects:")(terpri)
(setq a (ssget '((0 . "TEXT"))))
and gets divisor char </>:
after that:
(setq n (sslength a))
(repeat n
....
)
repeats n times, n=number of texts in my selection
3rd party tool which didn't match our scaling needs the file is a fas so I have tried to reverse engineer the whole function using trial and error. The following code works perfect except we need multiple (x amount) lines of text I have at current the M txt function which mimics and is effective for today however we need all lines to be individual.
I’m playing round with a loop but how to achieve my need..He had a 3rd party tool which didn't match our scaling needs the file is a fas so I have tried to reverse engineer the whole function using trial and error.
The following code works perfect except we need multiple (x amount) lines of text I have at current the M txt function which mimics and is effective for today however we need all lines to be individual.
;Starting lisp program...(defun C:REDtext ();Creating Layers (if non existant)...(command "layer" "m" "TEKST-1.5mm" "lt" "continuous" "" "c" "1" "" "");Memorising previous layer...(setq MYOLDLAYER (getvar "clayer"));Setting requierd layer...(COMMAND "LAYER" "SET" "TEKST-1.5mm" "");Setting variable "MYHEIGHT" to "DIMSCALE" x 2...(setq myheight (* 2 (getvar "DIMSCALE" )));Requesting and storing usser defind point...(setq MYPOINT (getpoint "Start punt :")); Requesting and storing user defind text...(setq MYTEXT (getstring T "Nieuw tekst :"));Placing text...(command "text" MYPOINT MYHEIGHT "0" MYTEXT); Restoring previous layer...(setvar "clayer" MYOLDLAYER);Closing lisp program...)
this code is used to fix specific font but its problem that it will prompt you to select single text
i need to make it to select multiple text so it saves me a lot of time,
;;; Process Individual request
(defun cht_ProcessIndividual ()
(setq sslen (sslength sset))
(while (> sslen 0)
(setq temp (ssname sset (setq sslen (1- sslen))))
[Code]...
I have inside every text,Mtext contents different text style like Arial_1 , Arial_2.
How i can give all the contents inside one style ? the normal procedure i will enter inside text to enter editing mode and changing text format style one by one. I want it once.
I want to save my routing of entering every text to change its content text style.
(Notice:select all from outside without editing mode will not do the job)
I have text objects with the same Z value and I will select as follows:
(setq sstxt (ssget '((0 . "TEXT")(8 . "APS-text"))))
How to store this value in another variable "zvalue" to apply to:
(command "change" "select text objects" "" "_p" "_e" zvalue "") ?
I use the bounding box (vla-getboundingbox) to assess parameters of blocks. These blocks have text on some of the faces that extends beyond the simple dimensions of the blocks themselves. I'm wanting to have bounding box ignore the text and can't sort it out. I've tried putting the text on a separate layer and turning it off and freezing it.
I've considered looking at sub entities and filtering out the text but I don't know if there is a solution here or not.
I have an mdb database, with one table called MATRIX. That table has seven relevant fields, see attachment. What I want to have is for every language an txt file.
Like for example:
DUT.txt
2BK1;BATTERIJKAST sBk
2RK1;REMKAST sBk
and so on
ENG.txt
2BK1;BATTERY CUBICLE sBk
2RK1;BRAKE CUBICLE sBk
and so on
ITA.txt, the same
DEU.txt, the same
ESP.txt, the same
FRA.txt, the same
This is a routine that draws a line between duplicate text.
Would it be possible to have the line as bold red p-line so that its easier to identify.
;; This AutoLISP routine examines all the user-selected TEXT and MTEXT items,
;; and draws a line on the current layer between any two that have identical
;; string values.
;; Leading and trailing blanks spaces are ignored.
;; %% modifiers, like %%u, are not ignored.
;; Upper- and lower-case differences are not ignored.
(defun c:fdt () ;;Find Duplicate Text
(prompt "Select text items to examine: ")
(setq ss (ssget '((-4 . "<OR") (0 . "TEXT") (0 . "MTEXT") (-4 . "OR>"))))
(setq n 0)
[Code]....
I've looked around several places for a LISP that will alphabetize existing text. I cant seem to find what I need. I am looking for a routine where I can manually select text in a given order to get the outcome of AA,AB,AC,AD, or BA,BB,BC., etc.
I've attached a drawing to better explain what I am looking for. I do not know how to write LISP routines, but I know a little to be able to modify an existing one.
I'm trying to create a leader with no attachments. Code below. But I can't seem to shut of the Annotation Dialog.
(setvar "cmddia" 0)
(vl-cmdf ".Qleader" "S" "A" "N" pt1 pt2 "" )
Also I am trying to create a leader with text that is aligned and above the leader line.