AutoCAD .NET :: Get Securityheader From Vault Login?

Feb 6, 2013

I wonder if it is possible to get the securityheader from a Vault login in AutoCAD in the same way as in Inventor. In Inventor I add a reference to Connectivity.InventorAddin.EdmAddin.dll but I can' find a similiar reference for AutoCAD.  I have an AutoCAD add-in that needs to get some information from Autodesk Vault.

View 1 Replies


ADVERTISEMENT

AutoCAD Inventor :: ILogic Code To Login To / Log Out Of Vault

Oct 14, 2013

I am looking for a way to log out of vault from within Inventor using iLogic codes.  I have created an iLogic rule that automates export an assembly drawing and all sub component drawings. In my code, I have suppressed all Inventor prompts but I do not have a way to suppress Vault prompts. I can manually log off from vault and run this rule without any problems. However, if I forget to do so, I am stuck responding to update requests from vault and check out requests constantly for each and every file. 

any iLogic code to log in and log out of vault?

View 1 Replies View Related

AutoCAD Inventor :: Vault VBA Login And Export Saved Search

Jan 7, 2014

We are trying to automate a process we do most nights:

1) Log in to vault client.
2) Find a saved search called "Bobs Drawings".
3) Export saved search to csv or excel.

I would like to have a short VBA script which we could set up on the computer to run automatically and do this every night. Seems like a simple few lines of code but I've only ever made VBA scripts inside Inventor and never stand alone .exe files.

View 1 Replies View Related

AutoCAD 2013 :: AutoDesk 360 - Can't Login

May 16, 2012

Just installed 2013....when trying to login to Autodesk 360 through the program I get the following error. However, I can go to the 360 website and login just fine..

View 9 Replies View Related

AutoCAD Inventor :: Content Center Login R2010

Sep 21, 2011

I have a question about the Content Center.  We just hired a new employee, and I'm setting up his Inventor.  When I first tried to access the Content Center, I got a dialog asking for name, password, etc.  We seldom have new hires here, this being the first since I took over as Drafting Manager, so it's been a long while since we've set this up.  is there a way to look at the information on MY corresponding dialog?  I remember we sweat bullets just to make the Content Center work at all, and I'd like to just set the new one up exactly like mine.  We don't have a maintenance contract (when ya get down to one employee, some things just gotta go, and that was one...), so I can't call them.  We don't have Vault, and the content center files are on the network.  Everything is working, so I've NO interest in changing anything, I just 1) want to set the new one up the same as mine, and 2) don't want to put anything into the new dialog that will landmine the Content Center.

View 1 Replies View Related

AutoCAD Visual LISP / AutoLISP :: Load LSP File Named For Windows Login

Sep 14, 2012

If my windows login name is HSIMPSON and i have created HSIMPSON.lsp in a Supported Directory, how do I load that Lisp file via the command line?

I have tried:

(load "loginname")

but that doesn't work because the 'load' command seems to want an explicit name, not a variable name.

View 5 Replies View Related

AutoCAD Inventor :: 2012 Pro Causes Windows 7 Safe Mode To Reboot At Login Screen

Aug 17, 2011

I have found that with windows 7 64 bit (not sure about other versions) when inventor 2012 pro is installed, it causes windows safe mode to reboot at logon screen after like 3-4 seconds. I have found the cause to be a window service that it inventor installs called "Autodesk Moldflow Inventor Tool Suite Integration 2012 Job Manager". I disable this service via "msconfig" tool and windows safe mode works ok.

View 9 Replies View Related

Photoshop :: Login And Cancel Buttons

Oct 17, 2005

How did they make the login and cancel buttons,

View 5 Replies View Related

Photoshop :: How To Change Email Login Address

Oct 9, 2013

How do I change my email login address?

View 2 Replies View Related

Photoshop :: CS2 Gives Login Error Message And Shuts...

Jul 18, 2009

I just shot a wedding and need to be editing ASAP. I turned on PhotoShop CS2 and after loading it gives me the error message saying somehting to the effect of "Your username, login, organization, or serial key is missing or invalid. Photoshop must shut down". My copy is registered, and I have the loging info and serial , but I cannot do anything at all in the program. It doesn't give an option to re-enter my info. It just shuts itself down.

View 2 Replies View Related

After Effects :: Login As Admin To Save For Preset?

Sep 25, 2013

Cannot remember what keys to push when lauching AE to launch as admin to save an effect stack as a "my preset"?

View 2 Replies View Related

Photoshop :: Couldn't Get Login Page To Accept Username

Dec 13, 2012

when opening PSCS6 for work I get a popup telling me about my photoshop trial and that I have 30 days remaining? I have nad CS6 since it came out and paid in full for the upgrade from CS5.1 I did receive an email about a survey and sweepstake they wanted me to enter but I couldn't get the login page to accept my username etc.

View 3 Replies View Related

Photoshop Elements :: Get Rid Of Irritating Login And Username With EP12?

Jan 9, 2014

get rid of the irritating login & username with EP12?

View 1 Replies View Related

Photoshop Elements :: Cannot Login To Adobe Revel From Within Organizer 12

Dec 14, 2013

If I click on "Mobile Albums" and type in my Adobe id and password then it just sits there with the clock spinning. It never responds. I can log in from a browser window no problem. I have also tried to login from the Preferences -> Adobe Revel screen

View 2 Replies View Related

Edge Animate CC :: How To Send Login Details By Post In AN As Form

Jul 23, 2013

how do I understand the edge POST Login form?

look the code html:
 
<form id="form1" name="form1" action="http://www.aniwere.com.br/LoginExterno.aspx?emp=137975"; method="post"> <input type="text" id="txtLogin" name="txtLogin" size="20" placeholder="Login" style="height:20px; border: 1px solid #FFF; margin-bottom:5px;" /> <input type="password" id="txtSenha" name="txtSenha" size="20" placeholder="Senha" style="height:20px; border: 1px solid #FFF;" /> <input type="image" src="imagens/bt_entrar.jpg" name="button" id="button" style="margin: 5px 0 0 85px;" /> </form>
 
ok, i make 2 textbox and code in tigger
 
sym.$("operand1").html("<input type='text' name='txtLogin' id = 'txtLogin' style = 'width:115px; height: 10px;font-size:9px; background:transparent; border-color:transparent'></input>");
sym.$("operand2").html("<input type='password' name='txtSenha' id = 'txtSenha' style = 'width:115px; height: 10px;font-size:9px; background:transparent; border-color:transparent'></input>");

View 1 Replies View Related

AutoCAD Inventor :: Can't Log Into Vault

Mar 11, 2010

When I get latest versions of files from Vault Explorer and then open them in Inventor, the vault status of the files in the Inventor browser shows a triangle with an exclaimation mark inside of it. When I move my mouse over the status icon, it says "vault not open". There is no response when I try to log into the Vault within Inventor.

I upgraded from 2009 to 2010 Inventor and Vault two weeks ago. Everything worked fine until today. Vault Explorer seems to be working fine. The ADMS console seems to also be working fine. I can do all the routine tasks in both programs. The problem is only in Inventor.

View 4 Replies View Related

AutoCAD Inventor :: Block In DWG And Vault?

Dec 13, 2011

I am using the autodesk suit 2011. The problem I am having is when I copied a block from autocad using the copy command, then used the paste command in an inventor .dwg and it inserted as an autoCAD block. When I check the finished drawing into vault the autocad block does not show up and will not print.

View 2 Replies View Related

AutoCAD Inventor :: Changes Not Being Checked Into Vault

Aug 17, 2012

We have a user that has been experiencing problems when checking files into vault.  The problem occurs when he copies a design (the drawing and part file) in vault then checks out the files to make changes, saves it and checks it back in, Inventor doesn't check in the changes.  The preview window (i.e.. dwf that's generated on check in) is correct however the thumbnail is wrong and when you open the latest version none of the changes have been made.

This is taking up a lot of time because he has to make the changes twice and also has to be constantly looking back in vault to files he has just checked in to make sure they are correct.

View 7 Replies View Related

AutoCAD Inventor :: How To Add Raw Material To IPT - BOM / Vault

Oct 26, 2011

We are a mid sized company the builds our parts from raw materials. Steel Coils, Steel tubing, Steel plate, etc.

We are have been migrating from MDT to Inventor over the last few years. We are now trying to implement Vault and integrate that data into our ERP system. We would like to model a part and assembly and check that into Vault then pass the BOM into our ERP system.

It all sounds good up until I looked at how our part files were structured. There is not BOM in an ipt that I have found phantom or referential. Here is my problem

It takes 1 lb of a .0625" thich steel sheet that is 6.5" wide. We stamp our product in a 200 ton press producing a finish componet.Problem 1- Part1.ipt (model of my stamping) does not have a lower level it is a component in Inventor there is no BOM that I have found.Problem 2 - Part2.iam uses part1ipt but we punch a hole in it and push material outward to create a lip so we can lap weld the next part.When I try to extrude this feature I can only cut the part I cannot add material or deform it in any way.Problem 3 - We also manufacture bent tubes. We consume 1.5 ft of part C to make part D. I cannot insert 1.5ft of a part that is 20ft long as we buy it. then we bend it. I cannot insert a 1.5ft part into an assembly and then bend it.

Major problem - even though I can change the dwg file or idw file to add a parts list Vault does not put this information in the Item master BOM.

View 9 Replies View Related

AutoCAD Inventor :: How To Get Started With The Vault

Nov 8, 2011

I have opened Vault for the first time and I don't know how to access it, it wants a username/password/server/database. I am one of two people in the company how use inventor etc so there is no existing server/database within my company so I assume i have to set one up?

View 3 Replies View Related

AutoCAD Inventor :: IAssemblies In Vault

Sep 3, 2008

We have a product line that relies heavily on iAssemblies. The main assembly and several layers of subassemblies are all iAssemblies. All the children that needed to be generated so far were added to the vault.

If I activate a different member in the main assembly factory, Inventor wants to update some of the various children. For some reason, vault won't prompt me to check out the children. I get a variety of errors, unless I manually check out the children.

There are at least 20 iAssemblies involved at different levels of this thing, not to mention all the iParts thrown in as well.

View 6 Replies View Related

AutoCad 3D :: Cut Surface - Creating A Vault

Jan 14, 2012

vault_4.jpgvault_3.jpgvaul_2.jpg

I am trying to create a vault of a church by autocad (foto_1) So i need to eliminate part of the surfaces i ve created using the 'extrude' command at the line drawings of arcs. How can i cut these parts (foto_2)?

I've read about a 'slice' command but when i try it i get a message ''no solid objects were selected''.

I also tried to manage it with 3dsmax but it chooses the whole polygone (foto_3). The same passes with Sketchup8.

View 9 Replies View Related

AutoCAD Inventor :: Search Through Vault Folder?

Apr 11, 2013

I'm using the free Vault that doesn't have a batch print option so I've been writing some code that does the trick.

The code lists open drawings, assemblies and parts, and depending onwhich is selected, displays a list of all the drawings associated with the file and it's sub-components.

Everything is good except that when the list of drawings is populated I am only able to search through the working folder for drawings. This means that if the drawing has been modified by another, or the drawing has not been opened on the local computer, it will not print (or print the old version).

Is there a way to pull the latest files from vault into the working folder automatically? Currently the only way this is possible is by selecting "Get/Checkout" in vault and downloading the files.

View 8 Replies View Related

AutoCAD Inventor :: Vault Missing Buttons?

Apr 9, 2012

A customer has a problem with the add-in of Vault in Inventor. Log In and Log Out options are lost as shown in the picture. The machine already formatted and installed applications again but the problem continues. 

View 9 Replies View Related

AutoCAD Inventor :: Vault - Copy Design

Aug 29, 2012

I am making a copy design of a big file, two things I need to change manually which takes lots of time:

I need to change the status of files from Reuse to Copy, also I need to change the paths to the right ones as the paths that kick in by default when I change the main directory on the top are not right.

Is there a quick way of changing status of all the files to Copy, kinda shift and highlight or the way Vault renames files with Replace option? With big assemblies connected with 10 drawing files doing it all by hand.

View 9 Replies View Related

AutoCAD Inventor :: File Management And Vault

Dec 10, 2013

I started using inventor when he started the job.  I have been using Inventor for about 3 years now.  My question is that I have always practiced good file management at every level of a project from single parts to large assemblies; however at this new job the file management is horrible, in the last 3 years the company has been through 13 different drafters, thus each drafter was saving files in different location and names making finding parts and assemblies a nightmare.

The problem I am having is that the lead designer is insisting that we implement vault, and that it will solve our problems, However I feel that we needed to develop a universal file and naming convention first, get  our file hierarchy in order before we try and implement vault. There will only be 2 of us accessing the cad files and I don't think that vault would even be a good fit for our work flow.  

View 9 Replies View Related

AutoCAD Inventor :: Migrate Files From Vault

Nov 23, 2011

We are trying to migrate our 2010 and earlier inventor files that exists in our vault 2012 professional fully replicated environment to The latest inventor release.

We are trying to utilize the task scheduler. but when attempting to use the "Migrate Files from Vault" and select the option to add folders. we receive several pop ups, one after another. The header states "folder" and in the message box is simply "1000" then an "ok" button.

After clicking ok a half dozen times the dialog finally comes up to select the folder, but the entire vault is not available in the selection window. I have tried this on several machines and 2 different databases. Same result.

View 8 Replies View Related

AutoCAD Inventor :: Get Vault File ID From Document?

Dec 25, 2013

I'd like to get the Vault file Id from an inventor document on the local workspace in order to be sure that it has been checked in (I want to be sure  that all the files on the local disk have been checked in).

View 2 Replies View Related

AutoCAD Inventor :: Vault Files Won't Refresh

Oct 2, 2013

I search for a file in Vault 2014 and find it needs refreshing i.e. the double red arrows icon in "Vault Status" column. I hit the refresh button in the ribbon and the file still has the double red arrows icon and doesn't appear to refresh.

Inventor 2014?

View 1 Replies View Related

AutoCAD .NET :: Searching Files In Vault Using Interlop

Oct 9, 2013

I am trying to search for file in Vault from AutoCAD using Interop.

Is there any way to do so..?

View 2 Replies View Related

AutoCAD 2010 :: ARX And DLL Files On Vault Server?

Oct 1, 2013

My company is currently running AutoCAD 2012 and we have invested heavily in some custom DLL and ARX routines that really automate our design/engineering process.  The problem is that these currently resolve on laptop computers and our executive managment doesn't feel that it is very secure.

Their suggestion is to run AutoCAD through a virtual machine, which none of us like, for many reasons.

One option we would like to explore is using Autodesk Vault to store our DLL and ARX files, and require Vault login in order to load/run these files.

View 7 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved