AutoCAD Inventor :: Avoid Redundant Points And Open Loops In The Sketcher?

Nov 2, 2011

It happens often that a sketch has redundand points or open loops.

I don't want to run the sketch doctor to clean it up every sketch I create.

In the attached avi you can see the few steps that I use to create a sketch. I don't understand why at the end it has problems.

View 5 Replies


ADVERTISEMENT

AutoCAD Inventor :: Merge Points - Close Loops To Have Valid Extrusion Profiles

Jan 24, 2013

Why does this code fragment not work? (Within an active part sketch, with some sketched geometry.) 

I'm just trying to close the loops to have valid extrusion profiles.

Dim iCounter As Integer
Dim icounter2 As Integer
Dim oSPoint1 As SketchPoint
Dim oSPoint2 As SketchPoint
Dim xVal1 As Double

[Code]....

View 7 Replies View Related

Illustrator :: Remove Redundant Points While Maintaining Exact Shape Of Path

May 30, 2012

Is there a way to remove redundant points whilst maintaining the exact shape of the path?
 
After using Pathfinder or Expand there are often many redundant points which can't be removed using Simplify or Unite.
 
The VectorScribe plugin has a Smart Remove Points feature which is exactly what I want. I'm presuming the only way I can get that feature is to buy the plugin.
 
A simple example is shown below: The path is part of an exact circle and I need to remove one of the anchors.

View 6 Replies View Related

CorelDRAW Graphics Suite X5 :: Find REDUNDANT Objects / Curves / Lines / Points?

Feb 6, 2013

Looking for a nice script that can search a complex design with lots of linework and find all coinciding duplicates and select them all and delete them but leave (1) good copy.

Basically when I use Outline Pathfinder in Adobe Illustrator, then bring back into corel, sometimes get a lot of redundant objects.  I already set the settings in Adobe Illustrator to minimize that as much as possible.

View 2 Replies View Related

AutoCAD Inventor :: Duplicate Row Or Column Heading Values Detected - Change The Redundant

Mar 27, 2012

I am trying to create different bend tables for different thickness material.  If I have two radii that are the same for different thicknesses it gives me an error message on the second one that it is a duplicate column heading value.  The values of the bend table are dependent on the thickness of the material.  Why can't I have several different thicknesses with the same radii?

View 1 Replies View Related

AutoCAD Inventor :: Getting Closed Loops From Polylines In DWG Files

Feb 26, 2012

I am trying to import a complex curve from autocad lt (in my case an airfoil), to create parts.  I have drawn the curve in autocad lt as a polyline.  Autocad lt treats the curve as a single object, and seems to understand it as a closed loop. 

When I import the curve into Inventor lt, Inventor treats the curve as a series of unconnected line segments.  What can I do in either Autocad lt or Inventor lt to get Inventor to treat the curve as a single object, so that I can then extrude it?

View 2 Replies View Related

AutoCAD Inventor :: Ensuring That Sketches Are Closed Loops?

Mar 7, 2013

I am making some fairly free form sketches using lots of 3-point arcs that ultimately need to be closed loops so that I can extrude them. Although I have always been letting one arc snap to another at the end of the process I seem to have trouble closing the loop. It does not seem very apparent how to find the points that are not properly closed and I wind up struggling with the Close Loop function. Is there an easy way to tell where the problems are in a profile? I have tried showing all constraints, but that doesn't necessarily give me the clues I need.

View 5 Replies View Related

AutoCAD Inventor :: Self Intersecting Paths Or Loops Are Invalid For Operation?

Mar 9, 2012

In regards to sweeping, what does the title of the post mean (self intersecting paths or loops are invalid for this operation). I have a 3D sketch consisting of 1 straight line, one spline with 4 points dictated by 'points' and an arc. All have tangential constrains to each other and I am looking to sweep a circle along this path to create a bent wire. I don't have anypictures or files as it is a stand alone computer at the moment.

View 2 Replies View Related

AutoCAD Inventor :: Add Closed Sketch Loops To Existing Feature?

Nov 26, 2012

is there a way to use vb to add closed sketch loops to an existing feature?

I am trying to create a parametric template for a fan guard assembly, complete with drawings.

I am using an arrangement of circles defined using some linear sketch patterns as the cross-section of a revolved feature.  Using ilogic/vb, I want to automate the number and spacing of items in the linear pattern, and then update the loops selected for the revolved feature.

I have found code on this forum (courtesy of Curtis Waguespack) that I can use to select all closed loops and create a feature.  I can apply this code to create a NEW revolved feature, but I haven't been able to figure out how to use it to UPDATE an existing feature.

I need the feature to UPDATE rather than create new to maintain links in my assemblies and drawings.

View 1 Replies View Related

AutoCAD 2010 :: How To Avoid Nested References Reload Every Time Open Drawing

Feb 23, 2012

How to avoid nested references reload every time I open autocad drawing.  In some drawings I have twenty nested references.  I really need to avoid reload each reference.

View 1 Replies View Related

AutoCAD Inventor :: Avoid Retooling Reused Parts (Workflow)?

Nov 27, 2012

I have recently created an iLogic driven kitchen door that can become any door, at any size in our range. (Which is too big) The descrption udates to identify the characteristics of the door in fine detail.

The problem we have: Is there a simple system that will let our CADCAM guy know he's already tooled a door of that descrption before?

Previously we were using iParts, which made it simple for him, but a bit of a nightmare for the guys in the drawing office as our range was huge and full of custom sizes, that in some cases only varied by 1mm.

View 4 Replies View Related

AutoCad 3D :: To Remove Redundant Lines From 3D Solid Object

May 4, 2011

I cant seem to get the clean command to do anything, it asks whether i want

[Imprint/seParate solids/Shell/cLean/Check/Undo/eXit]
so i type "L"
it says select object
i click the solid
it says [Imprint/seParate solids/Shell/cLean/Check/Undo/eXit] again...

View 4 Replies View Related

AutoCAD Inventor :: Assembly To Avoid Work Of Forming Opposite Bent Part

Mar 19, 2012

I have a formed beam I would like to mirror in an assembly to avoid the work of forming the opposite bent part. I have mirrored it however the cuts in the lower side of the beam are mislocated as if the part were rolled over rather than mirrored.I am in Inventor 2012.

View 9 Replies View Related

AutoCAD 2013 :: Edit Block In Place Redundant Click

Sep 6, 2013

When I edit a block in place, REFEDIT toolbar pops up. This is good.

But why even I clicked "Add to working set" button on the toolbar, it still asks me select "Add" in command line?

Apparently I already selected "Add" button.

Is there a way to skip this command line option?

View 9 Replies View Related

AutoCAD Civil 3D :: How To Remove The Loops From Surface

Jun 8, 2013

Today's Question is as mentioned above, How to remove the loops from a surface?

I have a surface created from the points. Eventually it has got many ups & downs in the elevations, so I did delete some of the points from the surface. And due to this, some loops are developed inside the surface itself with the closed boundaries.

I also tried to draw surface lines in those loops, either they get shorten or gets enlarged but does not completely vanishes...

64 bit OS | Win-7 | 3.60 GHz Processor | 16.0 GB RAM | Civil 3D 2013 |

View 9 Replies View Related

AutoCAD .NET :: How To Populate Data Type Using Loops

Apr 26, 2011

I have to add 80 Xdata to some objects. How to populate them within a loop. This what I did for 11 of them . But

I am pretty sure there is a way to do it in a loop which I don't know .

 Public Sub SetXData2()
Dim doc As Document = Application.DocumentManager.MdiActiveDocument
Dim ed As Editor = doc.Editor

[Code]....

View 7 Replies View Related

AutoCAD 2010 :: 3D Shell Command - Face Loops Not Repairable

Jul 19, 2013

When trying to use the 3D shell command, I receive "Face loops not repairable" error. Why I get this error?

View 1 Replies View Related

3ds Max Modeling :: T-loops Spiraling Out Of Control

Apr 17, 2012

I'm having a huge issue in trying to prevent t-loops in my model. Every time I try the Cut and Loop technique to make more edges in the hopes of getting rid of the t-loops, the new loops keep "spiraling" if you know what I mean (in the attached image, the selected edges are the same line). As a result, more and more unwanted t-loops keep appearing and they have nowhere to connect and it prevents the model from working in Mudbox.

3DsMax and Mubox versions: 2012
Currently studying E-Media

View 1 Replies View Related

CorelDRAW X5 :: Detecting Loops Or Crossed Lines

Dec 28, 2012

Is there a command to find loops and crossed lines in curves/lines.

I've been playing with Powertrace and noticed that quite often the lines/curves will have loops in them, particularly at sharp bends.

I have to zoom right in to see these but this is a very painstaking and slow method of finding these. I use Draw primarily to get cut paths so there can't be any crossing lines. Visually the drawing can look good but cam software finds these loops as tiny as a few thousands of an inch.

View 14 Replies View Related

3ds Max :: Can't Select Edge Loops Created Using The Chamfer Tool

Dec 2, 2012

I can't select edge loops created using the chamfer tool. For example, add a cube (1 segment in all direction), convert to editable poly and select one edge, chamfer it a little bit to make it rounded, now there's clearly a loop of edges there, but it's not selectable by using the loop selection.

View 5 Replies View Related

Maya :: Crashing When Inserting Edge Loops Or Splitting?

Sep 18, 2011

both maya 2011 and 2012. It is crashing on simple operations on simple scenes. Whenever I add an edge loop or split a polygon.

View 1 Replies View Related

Maya Modeling :: Adding N Number Of Edge Loops At Once?

Oct 25, 2012

I know there is the insert edge tools, but I am looking to quickly add a variable number of edge loop either evenly spaced or sporadically space in one operation.

I'm coming from Lightwave3D so excuse me if I try to relate tools to it here.

[URL]

View 2 Replies View Related

Illustrator :: How To Open Work Points In Images For Screen Printing

Jun 15, 2012

(I use Macromedia Freehand MX), I just recently download the trial illustrator, and my question is to know how to open points in Illustrator images for screen printing in freehand using the Halftone in Illustrator I've tried but is not the same as the finish is different and of very poor quality here is a sample as freehand and illustrator as stated in:

Look at the difference of points:

As you can see in Illustrator can only do that from the menu: Effects / Pixelate / Color Halftone... , not sharp as seen in the picture above and therefore the image does not get to see very well, while in freehand if you can manipulate the points from large fine to a point, points also can be made round, linear or ellipse and therefore may work better for screenprints and other designs that open nesecitan points at home. What I'm interested to know if there is another way to work so that the image is sharp with the open items as well as in freehand.

View 12 Replies View Related

3ds Max :: Symmetric Modeling - Adding / Removing Edge Loops While Preserving UVs

Oct 5, 2011

Any way to make symmetric mesh edits, ie adding/removing edge loops, while preserving your UVs? I have unique UVs for each side of the model, and I don't want to have to delete half of the mode, apply a symmetry modifier, then offset half of the UVs every time I need to make an edit to the model.

View 2 Replies View Related

Maya Modeling :: Selecting Range Of Edge Rings / Loops

Jun 15, 2012

I know how to use the various menu items to select rings and loops, and even understand that double-clicking will select an entire loop/ring, but how do I select a range of loops/rings?

After selecting the first edge, then double-clicking on a second only results with the entire loop/ring getting selected. A single-click will merely add the next selection to the first, but not fill in the range in between. This used to be more intuitive. What has changed? I've tried using additional keys to no avail.

View 2 Replies View Related

AutoCAD .NET :: Block Reference Hatch - Deleting Loops Within A Hatch

Feb 22, 2013

I want to be able to add a Block Reference to a hatch. I'm adding the block reference to an ObjectIdCollection and the hatch is not taking it when using AddLoop().

So I thought maybe I needed to add the location of the polyline (curve-like) object that is member of the blockreference to the hatch, but I don't know how to get its ObjectId.
 
Hatch thisHatch = new Hatch();thisHatch.Layer = layerName;thisHatch.SetDatabaseDefaults();thisHatch.SetHatchPattern(patternType, patterName);thisHatch.Color = Color.FromColorIndex(ColorMethod.ByColor, colorIndex);thisHatch.Transparency = new Transparency((Byte)(255 * (100 - 60) / 100));tSpace.AppendEntity(thisHatch);transaction.AddNewlyCreatedDBObject(thisHatch, [code]........

Also, I'm trying to delete certain HatchLoop that is associated to a polyline but I don't know how to do it. I'm going through the loops in the hatch but I don't know what to do there. I wanna do this so I create a new and different hatch on top.

I think one could also copy all the loops except the one one wants to delete, but I'm not sure how to tell which one is the one I want to delete that is the one associated to a polyline or that is in certain region.

View 1 Replies View Related

AutoCAD Inventor :: Open Up Parts Separately - When Trying To Open Assembly

Jul 28, 2013

Why am i forced to open up parts separately when trying to open my assembly. Once I open my assembly I get pop up windows asking me to either open, skip, or find the part it specifies.

View 2 Replies View Related

AutoCAD Inventor :: 4 Points Bending

Jul 16, 2012

I am trying to run a 4 points bending simulation on a concrete beam but i can't create the 2 support points on the bottom side. Is there an option that i could use or a tutorial that explains the process?

View 3 Replies View Related

AutoCAD Civil 3D :: Export Points To Datacollector And Create Points List

Feb 8, 2013

I had to create a boundary map and place points to all corners. How to export these newly created points back into my data collector (Ranger) and also I'm trying to figure out how to print out a points list. 

I stumbled on to this thread but I guessing that it's a different CAD year because my modify tab doesn't look like this. URL.....

View 4 Replies View Related

AutoCAD Civil 3D :: Large Surface - Converting Points To Cogo Points

Mar 5, 2013

I have a large surface (over 1.5 million points and 20 000hectares)

I need to get a point file .csv from the TIN to be able to use it in another program.

-so i've extracted the points from my surface, but they are Autocad points.

-next step is to convert them to civil 3d points.

-I can not select them all when converting them or my computer crashes.

-so i select about 25 000 at a time, the converting takes roughly 10 minutes.

and i have over 1.5 million points to do.

how can i speed this up.

will more ram useful?

View 9 Replies View Related

AutoCad :: Converting Land Desktop AECC Points To Cogo Points

May 17, 2013

there is a way to convert land desktop aecc points to cogo points and use the full description?

I do not have access to the ldt files nor to the Descriprion keys file. It would be nice if there was an option to preserve full descriptions when converting (that would be just too simple).

View 0 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved