AutoCAD Inventor :: How To Make X-crimp In Sheet Metal
Nov 27, 2013
I have a number of flat pannels (roughtly 4x5 feet) that need a 3/4" x-crimp (basically push out the center 3/4"). Is there an easy way to do this? I'm having a bit of trouble figuing it out. I have a lot of pannels to make, all different sizes so it needs to be easy to change the basic pannel size.
I can make the pannel with conventional tools easy enough but then the flange (and other sheet metal tools) won't work (says it's not a sheet metal edge even though it is the same thickness).
I'm on 2014.
Windows 7.
View 6 Replies
ADVERTISEMENT
Jun 11, 2012
I need to create the crimp plate in inventor to give my shop the measurements before the crimping process for material and also give them measurements to complete the crimping process. I figured I could use the sheet metal process. I'm trying to find an easier way than going back to Autocad and p-line everything.
View 6 Replies
View Related
Jan 25, 2013
I created this part with solid modelling......can / how this be made with sheet metal tools.....i do not use sheet metal tools but plan to.
View 2 Replies
View Related
Dec 27, 2011
When two flange corners come together? I have attached my model .
View 6 Replies
View Related
Apr 18, 2012
I`ve not used the sheet metal parts that much but have a part which would suit Sheet metal.
How do i make this shape with sheet metal tools .Also how to press the groove starting in the metal at the begining of the bend and continuing through to the end of the bend at the opposite side.Would not even know how to start this part in sheet metal with Inv.2012.
Do i get the metal sheet and use bend to make the sides?
View 4 Replies
View Related
Nov 30, 2012
I want to know if you can make the simulation of sheet metal bending, I'm designing a bending die, and I need to simulate the folding.
View 2 Replies
View Related
Feb 10, 2012
I wan't to make a corner seam to a sheet metal product, but I can't make the last 2 corner seams.
View 6 Replies
View Related
Apr 2, 2012
I am having trouble with a part that I wont to convert to sheetmetal and make a drawing with bend annotations.
Converting the part goes fine but the flat pattern is only a "semi-flat-pattern" 2 of the 4 bends doesn't unfold.
I have a 8mm plate and the internal radius is 2mm and the external radius is 10mm and the bend angel is 10 degrees sow everything should be fine.
But how to add the last to bends to make my flat pattern unfold correctly?
Inventor Professional 2012
Vault Professional 2012
View 4 Replies
View Related
Dec 6, 2011
I am trying to make a custom flange to my sheet metal part. The flange tool only gives parallel flanges, but I would like my flange to be longer on one end than the other. Basically cut at the red lines.
I am using Inventor 2009 Suite.
ACAD 2010
ACADE 2008
AIS 2009
View 1 Replies
View Related
Feb 21, 2012
I am using IV 2010. I am trying to make a 5/8" sheet metal piece with the surfaces shown. I have tried to thicken the surfaces but do not get the results I am looking for. After the surfaces are thickened I need them to be able to lay flat with flat pattern command.
View 4 Replies
View Related
Dec 28, 2012
The part i make is from solid model>The part needs to be in sheet metal.What steps do i use to make as sheet metal part and have option to flatten part.
View 1 Replies
View Related
Sep 12, 2013
A collegue asked me about this as he has been given a part to model and the details are for the flat sheet not the finished model. Is this possible in 'sheet metal'? I had a quick play but couldn't work it out. Im used to creating the finished part and 'un-folding' to get the flat pattern.Detail supplied below.
View 4 Replies
View Related
Jul 14, 2012
I just what to cut a sheet metal,
and I don't know how (see in Capture.JPG where i what to cut, and test.iam what I what to cut).
Where is the icon "project the geometry" ?
View 6 Replies
View Related
Jan 6, 2012
I need a flat pattern for this part but it seems impossible. STEP 2 illustrate the desirable result.
View 7 Replies
View Related
Aug 21, 2013
Working with sheet metal and laying out a pattern for the cnc and was wondering if there is a way to imprint an extrusion onto the surface instead of cutting it. Mainly this will be used for a marking tool so the line type or layer would need to be different.
View 5 Replies
View Related
Aug 8, 2013
I am working on a bin type unit, and am having trouble creating a flange, I am creating the bin in the final product stage, then I will separate into manufacturer components. I am having trouble adding this flange around the top 4 edges of the bin. I need the four corners to meet on a miter 45. I will then rip down each seam and have 4 separate panels.
Is this a bad workflow? Is there a better route? I attached the part in Inventor 2013 format,
View 8 Replies
View Related
Dec 18, 2013
Attached are two sheet metal parts that we need to unfold and make them flat for a drawing. We cannot seem to capture the reference A or reference B planes asked for by the unfold command.
View 3 Replies
View Related
Jan 27, 2012
Is there a way to get the appearance of perforation on a sheet metal tube without having to create each and every hole? Looking for an appearance to drag onto the surface. Kind of like when you make a part look like it is made of brick. It being just an image on the model surface.
View 9 Replies
View Related
Oct 20, 2011
Very thin gauge aluminum sheets with a composite sandwiched between them.
The challenge is, the panels are relatively thick, 3mm or 4mm, but a router is used on the fold lines before bending to cut through all but the outer aluminum. This makes for a very tight bend radius.
So, thick 3 layer material, tight bend with mitered corners. Can Inventor's sheet metal tools handle this?
View 5 Replies
View Related
Apr 17, 2013
Can this part be made with sheet metal tools...it will be made from aluminum. I attach the shape made with standard tools and the sheet metal attempt.......how do add the sides in sheet metal.
View 4 Replies
View Related
Sep 6, 2012
how incredible it is that Inventor still does not have a functional normal cut option for sheet metal like Solidworks and Solidedge have long had and I agree. I realize that there are the standard workflows like using derive and thicken to get around this problem. However, for those interested, there is a way to make a normal cut (for laser/cnc) directly in the sheet metal part in many cases. It involves using a sketch to split a face and then using the resulting profile for a thicker/cut feature. I'm always interested in any other methods out there for obtaining normal cuts in complex sheet metal (for a clean dxf export). By the way, Autodesk, do you actually not have any plans of ever adding functionality in this area?
View 4 Replies
View Related
Feb 3, 2012
what's the best way to make tabs on a rolled round ring. I got it done using unfold/refold option but I can not get sheet metal flat.
View 4 Replies
View Related
Jul 3, 2012
I am using IV ultimate 2013
just found about this add-in:[URL]
But its not working for me:
I ran the installer, created a sheet metal part and hit rebuild all, it did not create any proeprties, also tried to manually create the properteis then hit rebuild, no go.
I also did a search on my hardrive for the ApplicationPlugins, and placed the sheet metal folder in all of them(there were 3) tried again noto.
The add-in also does not appear in the add-in manager.
Or is there different what to get the flat pattern dimensions in 2013
View 9 Replies
View Related
Dec 7, 2012
I have just modelled a part with some faces and tried to convert to sheet metal to have inventor make the bends between the faces. However when trying to convert to sheet metal i get the following error message (Autodesk Inventor Professional Tip) - "This model cannot be converted to Sheet Metal because it contains features that have created multiple bodies. In order to convert to Sheet Metal these features must first be removed."
As the picture show the part only has 1 solid. Even when deleting all features except the "base" face I get the same error message or Tip as Inventor calls it.
View 5 Replies
View Related
Dec 20, 2012
I have a sheet metal door with a little bracket that gets welded to the inside lip through a cut-out in the face of the door. (see assembly)
I can't get the cut-out to line up flush with the inside lip of the door, as that is where the brackets gets welded to. the current aseembly is set-up the way I want, but I can't get a flat pattern on the door, becasue of the cut going across the bend.
I have checked off the "cut across bend" in the cut dialogue box, but this leaves a small (~1/32) lip in the cut-out and runs interference in the placement of the bracket.
Inventor Pro Suite 2013
Sean Farr
Product Designer at TESInc.ca
Inventor Professional 2014-Update 2 - AutoCAD Electrical 2014
Win7-x64 | ASUS P8Z77-V | i7 3770 -3.4 GHz | 32GB RAM |
240GB SSD | nVidia GTX 670 4GB - 320.49
View 2 Replies
View Related
Oct 5, 2007
How can I create a sheet metal jog? Like the attached. I used a contor flange to creat this one, but I have to add a jog to an existing part and don't want to have to totally redraw it just to get the jog. I'm hoping you can add it like you can a flange.
View 9 Replies
View Related
Nov 13, 2011
I was designing a part which consisted in a circular sheet metal part with a hole in the center, and a bent rectangular radii-oriented section. The second feature is the one I want to give focus in this thread.
Take a circular sheet metal with a diameter of 30 mm and a thickness of 1 mm. Now, to achieve the bent section one would perform - in a workshop or any other equivalent - two parallel slices of about 5 mm in length with a distance from each other of 4 mm. The slice would start in the circumference and end somewhere nearer to the center of the disc, but not parallel to a radius (since its parallel to another slice 4 mm apart as said before). After the slicing was done, one would bend the section between the slices 90 degrees to any of the sides.
Now, in Inventor I couldn't find a way to do this. I couldn't just slice a line through the disc. I worked it around by cutting rectangles of 0.2 mm in width and with the length of the desired slices, and then using the folding command to bend it 90 degrees. Is it possible to perform this so called slices?
View 2 Replies
View Related
Sep 3, 2013
I made a part in sheet metal and used the Cut tool for cut-outs...i tried by using flatten Patern,draw sketch but this did not cut part...is there a more better way of making these cuts?
INV 2013
View 2 Replies
View Related
Apr 30, 2013
I have been trying to work out how to make interlocking joints in sheet metal parts. The attached screen shot is the only way I have found to do it in Inventor, but it is a cheat. One of the flanges is a 85˚ bend because if it were 90˚ it would give an error "Flange Body intersects with existing body or self intersects."
View 4 Replies
View Related
May 7, 2012
I have setup all our Sheet Metal Rules to be all of our stocked in house sheet metals. The sheet metal rules are named like:
ALUM 5052 H32 1/2" (Part Number)
ST STEEL T304 3/8" (Part Number)
STEEL 44W 1/8" (Part Number)
etc.
And each rule has the proper thickness, material, and some standardized bend radius's. I've done this to introduce more uniformity in our designs, and to also allow the designer to put as much information into the model as possible, so that if someone else does the drawings, there is no question as to which material is used.
I now want to bring in the Sheet Metal Rule name into the drawing automatically. I can't seem to find a way to reference the Sheet Metal Rule directly from the drawing. What I need to do is pick a standard field in the i Properties (I used Stock Number), and put in =<Sheet Metal Rule> so that now the Stock Number references the Sheet Metal Rule, and then in the drawing I can just reference the Stock Number, and it will come in.
I don't like having to use the Stock Number as a middle man though, as none of our existing models are setup like this. Is it possible to reference Sheet Metal Rule in the drawing without having to use another field as a placeholder for the information?
View 7 Replies
View Related
Aug 2, 2012
I recently had an issue in adding flanges to a sheet metal part. The thread for that can be seen here:
[URL].......
The problem I am having now is with the size of the part. I need the linear distance from the bottom edge of a flange to match the inner diameter of my part. As you can see, this is not the case as it stands right now.
View 5 Replies
View Related
