I have a drawing where it is difficult to get length, weight, or cut out of an ipt.
Or how do you get it straight up for a presentation drawing?
(you can see the image in test1.bmp (our see the part in test1.ipt
The weight of the parts is correct but if the quantity is greater than 1 in a weldment the BOM collumm does not do the math and multiply the quantity X the weight. If it is a formula what is the syntax?
View 1 Replies View RelatedTake a look at these two pipes and let me know why they each have a different mass when they can be overlayed and appear the same?
View 3 Replies View Relatedwhy this difference in weight is appearing? Obviously i probably did something wrong. But what?
Inventor Version: 2014 SP1
Config : Intel (R) Xeon (R) CPU E5506 @ 2.13 GHz, 24 GB, 64bit win7
I have an assembly that i need to know the mass of, easy enough, however the assembly needs to be weighed without some of the parts in it. I hought i could simply uncheck "enabled" of the unwanted parts and re check the mass, however it does not change. Any solution besides adding the wanted parts individually?
View 6 Replies View RelatedWe have the weight inour title block tied to the mass property.It is set to populate automatically and it does very nicely.
The issue comes when I have an assembly and in the BOM I set certain components to be reference. When I go to Iproperties and then under the Physical tab select update,
the value updates there, but not in the associated drawing title block.
I am trying to include the weight for all components in assembly BOM as well as calculated overall weight in TB, but there are no available property to choose from in the drop-down list.
View 2 Replies View RelatedI would like to find the actual weight of a part in pounds.
I have attached one of the parts I would like to know the total pounds or ounces for. I’m using a specific material that I set in the Physical tab of iProperties.
Version = Inventor Pro 2009
How do you make someone appear thinner or fatter in Photoshop.
View 9 Replies View RelatedWhen dimensioning views on idw my line weights disappear on the view I am dimensioning. The Display Line Weights check box stays checked during this.
The only way to get them to display correctly is to select a line in the view and right click select properties and hit OK.
System:
Inventor 2012 Professional SP1
Dell Precision 3500 Intel Xeon W3565 @ 3.20 GHz
12 GB Triple-Channel Memory
AMD/ATI FirePro V7900 2 GB video card
Is this possible? I have aluminum part and would like to know how much weight the thinnest area can handle.
View 3 Replies View RelatedOur Autocad parts lists used to calculate the weight of parts times the quantities. Now we are using Inventor and I see that the weight shown on a parts list is the weight of an individual part - although the quantity could be 2 , 3 (more than one). Is there a way to have the total weight shown equal to MASS times ITEM QTY?
View 1 Replies View Relatedi have an already edited part list (because there are parts that come from different assemblies and other ones that don't have to appear in that part list) and i like to show the total weight of my drawing, that doesn't correspond with any assembly.
So, there is any possibility of summing up the values of a part list column.
Using Inventor 2013 SP1
A user just point out to me that when making a coil with 12 revolution is OK but 13 is really wrong.
tube Ø54x2 mm
Øcoil = 800 mm
pitch = 55 mm
Is there a patch for that?
Guide me through weight takeoffs and RISA 3D type actions in Inventor? My company is currently using AutoCAD to make drawings, Inventor to make models, an in-house analysis program (for weights, moments, loads, modulus of elasticity, and yield strength) as well as RISA 3D for final design. I need to streamline this process, and I know Inventor can do it all.
View 3 Replies View RelatedI am trying to change the line weight on an ipt file saving to a jpg format.
I am creating operations manuals and line weight and pixalation is unacceptable.
I have an assembly of parts that are on a stand thathas four (4) legs. If you were to distribute the load from CoG there will be vertical forces as well as moments on each pad that will support this assembly. Is there a way for Inventor to show the distribution of the CoG load on the given points?
View 1 Replies View RelatedIn trying to establish the tongue weight on a trailer modification, which inventor analysis tool would I want to use. I tried Stress analysis employing a teeter block but that only showed deflection caused by the various weights and not the affect of gravity. The gravity feature required data I don't have at present but before going through another learning curve I think it best to verify the appropriate direction.
View 8 Replies View RelatedI typically need to download iges, step files for assemblies and would like to assign their actual weights to the respective parts. These weights are typically not in the iproperties because they are just surfaces.
how to assign specific weights to the general properties in the iproperties box?
I want to changed the default visible line weight for all drawings. I just can't get it to work. I have changed my project file settings to "Read-Write", I have tried this in both the Default Standard and my own standard. I changed the "Visible (ANSI)" Line Weight, saved it, then hit "Save" on the Styles and Standards bar. It works for a document. But when I open a new document, the line weight has reverted back to the old value.
View 4 Replies View RelatedHow I can get my parts list to show a total weight? Obviously, getting the weight of each part into the parts list is easy. However, I have not been able to find a way to automatically get a total weight for the entire assembly.
View 5 Replies View RelatedWhat controls the line weight of the break lines in the detail views? Have tried everything, but still have them shown very thick.
View 2 Replies View RelatedI´m using Inventor Professional 2013 64-bit build 138.No matter what I get 1 pixel wide lines on screen and on printer.
I can control line colour and line type (as in solid, dashed, dotted etc) from Manage - Styles editor - Layers.
When I make changes to the "Visible" layer:
- the line colour changes come through both to screen and printer
- the line type only comes through to the screen, but not to the printer
- the line weight is ignored both by screen and printer
Tools - Application Options - Drawing - Display line weights
seems to have no effect at all.how to get drawing line weights to come through to the printer
What line weight changes the thickness of the border around a Detail View in 2012?
Inventor 2013
Windows 7 Professional 64-bit SP1
HP EliteBook 8470w
Processor: Intel(R) Core(TM) i7-3610QM CPU @ 2.30GHz
Memory: 16 GB
AMD FirePro M2000
3D Connexion SpacePilot
Is it possible to change the length of a line based on the length of an attribute?
I'd like to make the line a MINIMUM length of X" (I haven't decided how long yet--but know I'll need a minimum). But then after the user fills in the attribute, I'd like the length of the line to change to the length of the attribute plus a small amount (again, I haven't decided yet how much extra).
I was wondering if there is a way with DB's to have a line "follow" or "grow" with the content/value length of an attribute. Maybe some method of linking the attribute width to length of the line? Essentially, it would work just like turning on the underline setting when typing in mtext editor (or any program with an underline option for that matter), expect that the line could be placed anywhere, and would not have to reside directly below the text.
View 5 Replies View RelatedCommand to make a line change length to match length of a line, arc, polyline or circle? Could use this when making flat patterns layouts.
View 5 Replies View RelatedWith using superelevation wizard in Civil 3d 2012, changing the lane width is not affecting the resulted values of transion length and run-off length, Is that correct ? ( as civil is using standerd AASHTO tables which assume that lane width typically is 3.6m )
Also, There is only 2 tables for 2-lanes and 4-lanes roadway, Is it for total road width or for one directon only, and what about different no. of lanes ?
I am creating a block with attributes for a standard job. I have (4) total attributes in this block (for example: panel type, qty, length in imperial, length in mertic)
I would like my length in metric attribute to automatically populate based on the input from length in imperial.
Is this possible?
we are doing a customization of part in inventor , where we have done fork plate with constraints in model and extruding it with inputs from excel sheet. the plate size is getting changed as per the input given excel sheet.
but during the 2d drawing generation, if i take bom - the length and width columns are not coming.
I'm making a tube that is connected on another tube. I did this by skeleton modeling, for my tube extrusion i used Extrude To surface.
Is there any way to get the length of that extrude?
I know its possible to get the sweep length like this. Is there a way to get the extrude length as well?
'Set a reference to the active part document
Dim oDoc As PartDocument oDoc = ThisApplication.ActiveDocument
Dim oDef As PartComponentDefinition oDef = oDoc.ComponentDefinition
Dim opath As Path opath = oDef.Features.SweepFeatures.Item("TheSweep").Path
Dim TotalLength As Double TotalLength = 0
[Code]....