can't get the COG of a single part inside an assembly using the default feature of iLogic:
centerPt=iProperties.CenterOfGravityOfComponent("part1:1")
Wikihelp states that it's possible to get the COG of a part within an assembly.It doesn't seem to work anytime getting an error on some missing included references .do I need a Sub-Rule inside the single part?
There are many examples of creating rectangular patterns, but not many, if any, of interrogating existing patterns.I have attached the files and a screenshot of a rectangular part inside an assembly. The part contains a rectangular pattern of holes and workplanes.how do I get hold of each proxy of the workplane in the pattern?In other words I don't know what to put in the for loop at the end of this code fragment:
If _invApp.Documents.Count = 0 Then MsgBox("Need to open an the assembly document") ReturnEnd If If _invApp.ActiveDocument.DocumentType <> DocumentTypeEnum.kAssemblyDocumentObject Then MsgBox("Need to have an Assembly document active") ReturnEnd If Dim asmDoc As Assembly Document asmDoc = _invApp.ActiveDocument Dim asmDef As AssemblyComponentDefinition asmDef = asmDoc.ComponentDefinition im occurrences As ComponentOccurrencesoccurrences.
[code]....
I'm modeling a temperature gauge and would like to have glass over the gauge so the inside is visible. I can easily do this with an assembly, but I'm wanting to do this with a single part. I tried to derive a new part from the assembly, but the transparent part turns solid so nothing inside is visible. Is it possible to do this?
I've include pictures of what I want and what I end up with.
Inventor Professional 2013
Intel Xeon W3680 @ 3.33Ghz
12GB DDR3 RAM
NVIDIA Quadro 2000 GPU
Windows 7 Professinal 64-bit
If I want to find part which is inside another part or assembly, which means no matter how I turn camera, I always cannot see that part.
Does inventor has this function? Or is it possible to develope by .NET API?
I`m looking for the iLogic code that can change one parameter (user defined) for each (ipt) part in assembly (iam)
The one below doesn`t work.
Sub Main Dim oApp As Inventor.Application = ThisApplication Dim oAssy As Inventor.AssemblyDocument = oApp.ActiveDocument For Each oSubDoc as Inventor.Document In oAssy.AllReferencedDocuments On Error Resume Next Parameter(oSubDoc, "FH") = 15.26 Next End Sub
Possible to add a thread feature to a part using iLogic.
Basically in the iLogic form if the user selects "Threaded Rod" the existing Extrusion is updated to reflect a cylinder with a length and diameter specified by the user and then I need to have a Thread Added to the cylinder.
Computer Specs:
Windows 7 (64 Bit) Pro. SP1, Inventor 2014 Pro, 3D Connexion SpaceNavigator (Driver 3.15.2)
Motherboard: ASUS Rampage IV Extreme x79 Socket 2011
Processor: Intel Core i7 Six Core Sandy Bridge-E 3.2GHz OCed to 4.7GHz (Under Water)
RAM: G.Skill Ripjaw Z-Series 32 gig quad channel of RAM 1800MHz OCed to 2133MHz
Video Card: 2x Nvidia Geforce GTX 770 (Running Six (6) Monitors)
Monitors: [Primary = 2x 24in HD WS][Secondary = 2x 22in HD WS][Tertiary = 2x 19in FS]
Primary Hard Drive: OCZ Vertex IV 256 GB Solid State Drive
Secondary Hard Drive: OCZ Vertex III 120 GB Solid State Drive
I have an assembly which contains a CComPtr<ComponentOccurrence> pThisCompOcc , and I'd like to do two things.
Get the name of the "base" object, not the display name of the occurence Change the model and user parameter values of the occurrence I suspect that I need to find the function or method which gives me a CComPtr<PartComponentDefinition> pPartCompDef which the occurrence points to for the Q1, but what about Q2?
Presumably the parameters are associated with the Component Occurrence and the "real" name is associated with the Part Component Definition?
Is there a way in Inventor to take an assembly feature and basically have it fall out at the part level also? So if you were to open the part up, it would have the cutouts in it.
View 2 Replies View RelatedI am trying to link a hole feature in a part in an assembly with the number of a particular feature in another part within the assembly. I have a base plate part with a coutersunk hole feature that I want to pattern by linking it to the number of bosses in another part within the same assembly.
View 6 Replies View RelatedHow to run iLogic Rule which I created for .ipt file in assembly?
As I have a myPart.ipt file with iLogic Rules which could create part1.ipt, part2.ipt, ..... (hundreds of them).
Now, I want creats iLogic Rule in myAssembly.iam to run the iLogic Rules in myPart.ipt in order I could create correct .ipt file to be used in myAssembly.iam.
I have the same ilogic part placed in the same assembly, and i am trying to drive two different configurations of the same part and when i apply the configuration it changes both of the parts but to only one of the configurations.
Is there a way to drive them seperately even though they are the same part.
I downloaded a model off a website, it is, (excuse my electrical background ignorance) a jumper for terminal blocks.Our electricians use these and cut them down to size as needed.
Is there a way to use iLogic and a form or message box, to prompt upon opening the part as to how many jumpers are needed for the current assembly> It comes stock with 10, but they sometimes only use 2, 3 4 etc. etc..
I didn't model the part, but I can if it will make the rule easier to write.My idea I suppose was to have the part modeled with 2 jumpers and then use ilogic to create more if necessary.
at assembly level hole feature shown only in assembly. how to create same feature at same position on parts.
View 5 Replies View RelatedBefore using iLogic, I created lot of iAssembly and iPart. I could change iPart factory member when I need in iAssembly.Now, I want to move everything to iLogic.
how could I change the part by iLogic code?
For example:
I generated "Part1.ipt" and "Part2.ipt",...... (I have hundred of member)
In my assembly, sometimes, I need use Part1.ipt, sometimes I need use Part2.ipt.
Which is the iLogic Code I should to use?
Inventor 2009, WIN XP.
Autodesk Inventor Professional 2013 (64 Bit) SP2
Windows 7 Professional Service Pack 1
Intel(R) Xeon(R) CPU E5645
12.0 GB Memory
I have made an iLogic external module who copy the iProperties from an Excel files, when i open the module from the *.ipt file il works perfectly. But i need this function from *.iam files.
Something like this: when i click with right button in one selected part of assembly i can open the module only for this part and when i save it save the change for all modify part of *.
I'm trying to write a script which would process all the ipt files within assembly and launch certain functions according to a ipt file type.
I've already made such script for dimensioning parts which work for standart parts but not for metal sheets.
Here it is:
Sub Main Dim oApp As Inventor.Application = ThisApplication Dim oAssy As Inventor.AssemblyDocument = oApp.ActiveDocument For Each oSubDoc as Inventor.Document In oAssy.AllReferencedDocuments If oSubDoc.DocumentType = kPartDocumentObject Then Dim oPartPropset As Inventor.PropertySet = oSubDoc.PropertySets("Design Tracking Properties") Dim oPartParam As Inventor.PropertySet = oSubDoc.PropertySets("Inventor User Defined Properties") Dim oParameter As Parameter For Each oParameter In oSubDoc.ComponentDefinition.Parameters oParameter.ExposedAsProperty = True Next oParameter If oSubDoc.SubType = "{9C464203-9BAE-11D3-8BAD-0060B0CE6BB4}" Then Dim d1 = Round(SheetMetal.FlatExtentsLength, 1) Dim s1 = Round(SheetMetal.FlatExtentsWidth, 1) Dim g1 = Round(Parameter("Grubość"),1) FindOrCreateProperty("Długość [mm]", d1, oSubDoc, True) FindOrCreateProperty("Szerokość [mm]", s1, oSubDoc, True) FindOrCreateProperty("Grubość [mm]", g1, oSubDoc,
[code]....
this code distinguishes parts from sheet metal, and launches appropriate functions to get their dimmensions. It just doesnt work for metal sheets somehow. Seems like SheetMetal.FlatExtentsLength is performed from within the assembly, not part as it should be. I must have the addressing wrong. I've tried many things and different functions but nothing works for sheet metal parts.
This code might also be useful for different purposes. I'm also trying to lunch some external scripts for each part within an assembly, but there is no direct function for that (there is one only for internal scripts , based within the file).
I'm wondering if I can move a part in iLogic or rule via X,Y,Z coords say from it's current location to 0,0,0?
I don't want to use constraints because it simply can't jump from one constraint to the next without blowing up.
Is there a standard command or command sequence that allows for the changing of a parameter, say length, of a component from within an assembly. I'm looking to compile a code that allows for a template to be created, then that template will do changes based on text box input and then save out the modified parts with new part numbers.
View 2 Replies View RelatedI have a multi body part that I componented into an assembly. I am trying to get the assembly parameter in this case, "Height" to drive the parameters in the part model. I think I am using the right code but I get an error when I run the rule.
View 5 Replies View RelatedI've done an Addin which contains a "Place iLogic Component" function. This funcion work properly and the iLogic form is opened at place component time. Now, i would like to be able to open the form after the insertion, for edition purpose. So, i'd like to open the iLogic form of an assembly component (occurence) with the context menu for example.
So, my question is : Is there a way to check if a part or an assembly contain an iLogic form and to open it through Inventor 2012 API ?
I have a rule in the top assembly to update & want to run this as a final 'clean up' after various rules have run in sub assembly parts.
I have a rule within a part at the end of the line. I want this rule to goto the top assembly & run the 'Update' rule.
I have received a great solution from Bobvdd allowing ilogic control of the view rep in a part file (not an assembly file). The code below works brilliantly when the part file is the active document. However when the part is placed in an assembly and the ilogic is run with the assembly active, the code produces no result. How to modify the top 6 lines of code?
Dim oApp As Inventor.Application
oApp = ThisApplication
Dim oDoc As Document
[Code]....
When we send 3D models to customers, we always derive the assembly to make it 1 solid part, so the customer cannot disassemble it to copy our product, and then save it as a step file.
I want to Derive an assembly to a part and then save it as a *.step file with an ilogic rule.
I worked out the last part, but i cannot find the Derive assembly code anywhere.
Im not an experienced programmer, i can only Copy paste, so if the solution is already posted in a simular rule, i will not be able to pick what i need from the code
I want to simply set a custom iproperty as the Description in each part file within my assembly. I can do this easily at part level with ilogic but I want to be able to run the rule from the assembly level and all the parts run the rule. I am struggling to find a way to do this.
I think this may be the best method I have found but I think it must be far easier?
[URL].......
We have an iLogic assembly with to parts in it. Maybe to cylindrical parts. The iLogic rules should do the following.
1. Start a Rule after open document.
2. This Rule starts a Rule in the first cylindrical component.
3. This Rule ask the user for a diameter.
4. The assembly gives this new parameter value to the second component
5. Then the assembly calls another rule in the second component to change it with the new parameter
Everything is working fine when the following combinations are taking place:
1. I open up the assembly out of vault or from a local drive or an accessible server drive
2. I insert the assembly as sub assembly in another assembly from a local drive or an accessible server drive
It don't work with the following situation:
- I insert the assembly as sub assembly in another assembly out of vault
Then the user becomes the dialog "Choose a diameter" twice.
I don't know why, but I have the idea it has something to do with the functionality of inventor to insert a component more than once. If you insert a component in an assembly Inventor gives you the opportunity to add more than one occurence after each other.
change that behaviour? Maybe a switch to change that inventor "add more than one occurence" behaviour.
I want to be able to control the location/position of a component in an assembly. This is easy enough through the iProperties/Occurrence tab and then adjust the location of the X,Y, and Z offsets. Is this possible using iLogic? I have been unable to find a function to access via iLogic. Ultimately I am trying to translate a component about an axis not a pattern.
View 1 Replies View RelatedVery new to inventor 2012 coming form solid edge way back in the day (1998 to 2008) to autocad 2d. getting ready to move to the inventor and trying to figure out some things. searched videos , training etc but not even sure what to call it.
My questions are:
1. I design stamping dies and I will want to build sections from a stock strip with the outside then adding hole, dowels etc. what is the best work flow for this? It is kinda the middle between top down and bottom up.
2. what is the best work flow for adding counter bore , dowel in the block and then having this tied to the mating block so if I move the location of the holes in the block then move as well?
Is there a way to connect parameters from part1 to part 2 using iLogic, without using an assembly.
View 9 Replies View RelatedDear Sir, In particular project, when I insert part in Assembly file, It is inserted as a Tube & Pipe run part. so that It is not Grounded automatically. What is the settings by which I can insert as a normal part in assembly file ? I have attached herewith the JPG file also.
View 3 Replies View RelatedI would like to simplify this assembly into one seamless part for FEM calculation:The assembly consists out of parts that, in reality, will be welded together. Due to their form, there is no way to place them exactly onto each other, therefore there are slight gaps between the parts:
Now when I try to merge the assembly into one part via "simplify" --> "create simplified part" and choose "single solid body with seams between planar faces merged", Inventor does not fill these gaps (even though it displays only one part in the bottom right corner of my window). Unfortunately, the remaining gaps brings "contact" problems in the FEM simulation.
how to close the gaps and really merge the assembly into one part?
New user 2014
Part created in assembly does not update to part file.